zwnk
/
stuffy_stuff
0
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update 'printer.conf' 

hydra direct drive mount update
This commit is contained in:
zwnk 2020-12-24 15:39:25 +01:00
parent 2e4c80ddb6
commit ccd86e07cd
1 changed files with 25 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
printer.conf
View File

@ -57,8 +57,8 @@ dir_pin: !P0.20
enable_pin: !P2.8
step_distance: .0125
endstop_pin: P1.27
position_endstop: 0
position_min: 0
position_endstop: -9 #0
position_min: -10
position_max: 235
homing_speed: 50
@ -116,13 +116,13 @@ filament_diameter: 1.750
heater_pin: P2.7
sensor_type: 104NT-4-R025H42G #EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
#control: pid
#pid_Kp: 22.2
#pid_Ki: 1.08
#pid_Kd: 114
min_temp: 0
max_temp: 290
pressure_advance: 0.75
pressure_advance: 0.23
#max_extrude_only_velocity: 120
#max_extrude_only_accel: 1000
@ -163,9 +163,9 @@ control_pin: P2.0
#pin_move_time: 0.8
#pin_up_reports_not_triggered: True
#pin_up_touch_mode_reports_triggered: False
x_offset: -60
y_offset: -13
z_offset: 0.7 #2.9
x_offset: 11.684 #-60
y_offset: 40.199 #-13
z_offset: 3.25 #2.9
samples: 2
#speed: 3
@ -178,7 +178,7 @@ gcode:
G90
G1 Z20 F600
G28 X0 Y0 F3000
G1 X177 Y130 F3000 # G1 X117 Y117 F3000
G1 X110 Y130 F3000 # G1 X117 Y117 F3000
G28 Z0
G1 Z20 F500
BED_MESH_PROFILE Load=new
@ -211,10 +211,10 @@ serial: /dev/serial/by-id/usb-Klipper_lpc1768_09A0FF10031436AF84F46A5BC72000F5-i
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# tension = 0.2
#*# min_x = -3.0
#*# algo = bicubic
@ -229,10 +229,10 @@ serial: /dev/serial/by-id/usb-Klipper_lpc1768_09A0FF10031436AF84F46A5BC72000F5-i
#*# [bed_mesh new]
#*# version = 1
#*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# tension = 0.2
#*# min_x = -3.0
#*# algo = bicubic
@ -243,3 +243,9 @@ serial: /dev/serial/by-id/usb-Klipper_lpc1768_09A0FF10031436AF84F46A5BC72000F5-i
#*# max_y = 206.99
#*# mesh_x_pps = 2
#*# max_x = 159.99
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 22.427
#*# pid_ki = 1.168
#*# pid_kd = 107.652