zwnk
/
stuffy_stuff
0
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update 'printer.conf' 

new thermistor added
This commit is contained in:
zwnk 2020-11-04 02:46:41 +01:00
parent d1bf3f3301
commit 2e4c80ddb6
1 changed files with 51 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
printer.conf
View File

@ -100,17 +100,21 @@ stealthchop_threshold: 250
#driver_PWM_AUTOSCALE: True
#driver_HEND: 3
#driver_HSTRT: 0
[thermistor 104NT-4-R025H42G]
temperature1:25
resistance1:100000
beta: 4267
[extruder]
step_pin: P2.13
dir_pin: !P0.11
enable_pin: !P2.12
# step_distance 4 bmg 0.002409
step_distance: 0.00926
#0.00926 stock extruder #0.002409
step_distance: 0.002245188
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.7
sensor_type: EPCOS 100K B57560G104F
sensor_type: 104NT-4-R025H42G #EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
pid_Kp: 22.2
@ -118,9 +122,9 @@ pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 290
pressure_advance: 0.0
max_extrude_only_velocity: 120
max_extrude_only_accel: 1000
pressure_advance: 0.75
#max_extrude_only_velocity: 120
#max_extrude_only_accel: 1000
#####################################################################################
@ -161,7 +165,7 @@ control_pin: P2.0
#pin_up_touch_mode_reports_triggered: False
x_offset: -60
y_offset: -13
z_offset: 2.95 #3.1
z_offset: 0.7 #2.9
samples: 2
#speed: 3
@ -177,7 +181,7 @@ gcode:
G1 X177 Y130 F3000 # G1 X117 Y117 F3000
G28 Z0
G1 Z20 F500
BED_MESH_CALIBRATE
BED_MESH_PROFILE Load=new
[bed_mesh]
@ -200,3 +204,42 @@ path = ~/sdcard
serial: /dev/serial/by-id/usb-Klipper_lpc1768_09A0FF10031436AF84F46A5BC72000F5-if00
#####################################################################################
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# tension = 0.2
#*# min_x = -3.0
#*# algo = bicubic
#*# y_count = 4
#*# mesh_y_pps = 2
#*# min_y = 20.0
#*# x_count = 4
#*# max_y = 206.99
#*# mesh_x_pps = 2
#*# max_x = 159.99
#*#
#*# [bed_mesh new]
#*# version = 1
#*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# tension = 0.2
#*# min_x = -3.0
#*# algo = bicubic
#*# y_count = 4
#*# mesh_y_pps = 2
#*# min_y = 20.0
#*# x_count = 4
#*# max_y = 206.99
#*# mesh_x_pps = 2
#*# max_x = 159.99