Update 'printer_new122020.conf'

printer_new122020.conf

@@ -18,7 +18,6 @@ max_z_accel: 150
 
 [tmc2208 stepper_x]
 uart_pin: P1.17
-microsteps: 16
 interpolate: True
 run_current: 0.65
 hold_current: 0.5
@@ -33,6 +32,7 @@ step_pin: P2.2
 dir_pin: !P2.6
 enable_pin: !P2.1
 rotation_distance: 40
+microsteps: 16
 # step_distance: .0125
 endstop_pin: P1.29
 position_endstop: 0
@@ -44,7 +44,6 @@ homing_speed: 50
 
 [tmc2208 stepper_y]
 uart_pin: P1.15
-microsteps: 16
 interpolate: True
 run_current: 0.65
 hold_current: 0.5
@@ -59,6 +58,7 @@ step_pin: P0.19
 dir_pin: !P0.20
 enable_pin: !P2.8
 rotation_distance: 40
+microsteps: 16
 # step_distance: .0125
 endstop_pin: P1.27
 position_endstop: -9 #0
@@ -70,7 +70,6 @@ homing_speed: 50
 
 [tmc2208 stepper_z]
 uart_pin: P1.10
-microsteps: 16
 interpolate: True
 run_current: 0.65
 hold_current: 0.5
@@ -85,6 +84,7 @@ step_pin: P0.22
 dir_pin: P2.11
 enable_pin: !P0.21
 rotation_distance: 8
+microsteps: 16
 # step_distance: .0025
 endstop_pin: P1.25
 endstop_pin: probe:z_virtual_endstop
@@ -96,7 +96,6 @@ homing_retract_dist: 10 # to fix bltouch clone error
 #####################################################################################
 [tmc2209 extruder]
 uart_pin: P1.8
-microsteps: 16
 interpolate: False
 hold_current: 0.5
 run_current: 0.75
@@ -116,6 +115,7 @@ dir_pin: !P0.11
 enable_pin: !P2.12
 #0.00926 stock extruder #0.002409
 rotation_distance: 7.18450
+microsteps: 16
 # step_distance: 0.002245188 
 nozzle_diameter: 0.400
 filament_diameter: 1.750