zwnk
/
stuffy_stuff
0
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update 'printer_new122020.conf'

This commit is contained in:
zwnk 2020-12-28 15:25:11 +01:00
parent 48ac2cd8d3
commit 5cb2794bb6
1 changed files with 74 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

106
printer_new122020.conf
View File

@ -3,6 +3,8 @@
# X,Y and Z are TMC2208 in UART Mode.
# E is an TMC2209
# BLTouch
# klipper v0.9.1-139-ga5ebe582
# mainsail v0.3.0
#####################################################################################
[printer]
@ -18,7 +20,7 @@ max_z_accel: 150
uart_pin: P1.17
microsteps: 16
interpolate: True
run_current: 0.7
run_current: 0.65
hold_current: 0.5
stealthchop_threshold: 600
driver_PWM_AUTOGRAD: True
@ -31,7 +33,7 @@ step_pin: P2.2
dir_pin: !P2.6
enable_pin: !P2.1
rotation_distance: 40
#step_distance: .0125
# step_distance: .0125
endstop_pin: P1.29
position_endstop: 0
position_min: 0
@ -44,7 +46,7 @@ homing_speed: 50
uart_pin: P1.15
microsteps: 16
interpolate: True
run_current: 0.7
run_current: 0.65
hold_current: 0.5
stealthchop_threshold: 600
driver_PWM_AUTOGRAD: True
@ -57,7 +59,7 @@ step_pin: P0.19
dir_pin: !P0.20
enable_pin: !P2.8
rotation_distance: 40
#step_distance: .0125
# step_distance: .0125
endstop_pin: P1.27
position_endstop: -9 #0
position_min: -10
@ -70,7 +72,7 @@ homing_speed: 50
uart_pin: P1.10
microsteps: 16
interpolate: True
run_current: 0.7
run_current: 0.65
hold_current: 0.5
stealthchop_threshold: 200
driver_PWM_AUTOGRAD: True
@ -83,10 +85,10 @@ step_pin: P0.22
dir_pin: P2.11
enable_pin: !P0.21
rotation_distance: 8
#step_distance: .0025
# step_distance: .0025
endstop_pin: P1.25
endstop_pin: probe:z_virtual_endstop
position_endstop: 0
#position_endstop: 0
position_min: -1
position_max: 250
homing_retract_dist: 10 # to fix bltouch clone error
@ -97,8 +99,7 @@ uart_pin: P1.8
microsteps: 16
interpolate: False
hold_current: 0.5
run_current: 0.95
#gear_ratio: 3:1
run_current: 0.75
stealthchop_threshold: 250
#driver_PWM_AUTOGRAD: True
#driver_PWM_AUTOSCALE: True
@ -113,18 +114,23 @@ beta: 4267
step_pin: P2.13
dir_pin: !P0.11
enable_pin: !P2.12
#0.00926 stock extruder #0.002409
rotation_distance: 7.18450
#0.00926 stock extruder #0.002409
#step_distance: 0.002245188
# step_distance: 0.002245188
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.7
sensor_type: 104NT-4-R025H42G #EPCOS 100K B57560G104F
sensor_pin: P0.24
#control: pid
#pid_Kp: 22.2
#pid_Ki: 1.08
#pid_Kd: 114
min_temp: 0
max_temp: 290
pressure_advance: 0.23
max_extrude_only_velocity: 100
#max_extrude_only_velocity: 120
#max_extrude_only_accel: 1000
#####################################################################################
@ -165,7 +171,7 @@ control_pin: P2.0
#pin_up_touch_mode_reports_triggered: False
x_offset: 11.684 #-60
y_offset: 40.199 #-13
z_offset: 3.1 #2.9
z_offset: 2.9 #2.9
samples: 2
#speed: 3
@ -198,6 +204,42 @@ gcode:
PID_CALIBRATE HEATER=extruder TARGET=210
SAVE_CONFIG
[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
default_parameter_X: 230 #edit to your park position
default_parameter_Y: 230 #edit to your park position
default_parameter_Z: 10 #edit to your park position
default_parameter_E: 1 #edit to your retract length
gcode:
SAVE_GCODE_STATE NAME=PAUSE_state
BASE_PAUSE
G91
G1 E-{E} F2100
G1 Z{Z}
G90
G1 X{X} Y{Y} F6000
[gcode_macro RESUME]
rename_existing: BASE_RESUME
default_parameter_E: 1 #edit to your retract length
gcode:
G91
G1 E{E} F2100
G90
RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
BASE_RESUME
[pause_resume]
[display_status]
[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
gcode:
TURN_OFF_HEATERS
CLEAR_PAUSE
SDCARD_RESET_FILE
BASE_CANCEL_PRINT
[bed_mesh]
speed: 100
@ -226,41 +268,41 @@ serial: /dev/serial/by-id/usb-Klipper_lpc1768_09A0FF10031436AF84F46A5BC72000F5-i
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# -0.177500, -0.145000, 0.010000, -0.015000
#*# -0.122500, -0.120000, 0.015000, -0.035000
#*# -0.082500, -0.055000, 0.053750, -0.037500
#*# -0.027500, -0.018750, 0.065000, 0.010000
#*# tension = 0.2
#*# min_x = -3.0
#*# min_x = 19.994
#*# algo = bicubic
#*# y_count = 4
#*# mesh_y_pps = 2
#*# min_y = 20.0
#*# min_y = 94.999
#*# x_count = 4
#*# max_y = 206.99
#*# max_y = 229.999
#*# mesh_x_pps = 2
#*# max_x = 159.99
#*# max_x = 224.984
#*#
#*# [bed_mesh new]
#*# version = 1
#*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500
#*# 0.211250, 0.065000, -0.022500, -0.175000
#*# 0.322500, 0.177500, 0.051250, -0.130000
#*# 0.400000, 0.237500, 0.091250, -0.112500
#*# -0.177500, -0.145000, 0.010000, -0.015000
#*# -0.122500, -0.120000, 0.015000, -0.035000
#*# -0.082500, -0.055000, 0.053750, -0.037500
#*# -0.027500, -0.018750, 0.065000, 0.010000
#*# tension = 0.2
#*# min_x = -3.0
#*# min_x = 19.994
#*# algo = bicubic
#*# y_count = 4
#*# mesh_y_pps = 2
#*# min_y = 20.0
#*# min_y = 94.999
#*# x_count = 4
#*# max_y = 206.99
#*# max_y = 229.999
#*# mesh_x_pps = 2
#*# max_x = 159.99
#*# max_x = 224.984
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 22.427
#*# pid_ki = 1.168
#*# pid_kd = 107.652
#*# pid_kp = 21.448
#*# pid_ki = 0.953
#*# pid_kd = 120.647