zwnk/stuffy_stuff
0
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Update 'printer_new122020.conf'

Browse source
This commit is contained in:
zwnk 2020-12-28 15:25:11 +01:00
parent 48ac2cd8d3
commit 5cb2794bb6
1 changed files with 74 additions and 32 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

98
printer_new122020.conf
View file

@ -3,6 +3,8 @@
# X,Y and Z are TMC2208 in UART Mode. # X,Y and Z are TMC2208 in UART Mode.
# E is an TMC2209 # E is an TMC2209
# BLTouch # BLTouch
# klipper v0.9.1-139-ga5ebe582
# mainsail v0.3.0
##################################################################################### #####################################################################################
[printer] [printer]
@ -18,7 +20,7 @@ max_z_accel: 150
uart_pin: P1.17 uart_pin: P1.17
microsteps: 16 microsteps: 16
interpolate: True interpolate: True
run_current: 0.7 run_current: 0.65
hold_current: 0.5 hold_current: 0.5
stealthchop_threshold: 600 stealthchop_threshold: 600
driver_PWM_AUTOGRAD: True driver_PWM_AUTOGRAD: True
@ -44,7 +46,7 @@ homing_speed: 50
uart_pin: P1.15 uart_pin: P1.15
microsteps: 16 microsteps: 16
interpolate: True interpolate: True
run_current: 0.7 run_current: 0.65
hold_current: 0.5 hold_current: 0.5
stealthchop_threshold: 600 stealthchop_threshold: 600
driver_PWM_AUTOGRAD: True driver_PWM_AUTOGRAD: True
@ -70,7 +72,7 @@ homing_speed: 50
uart_pin: P1.10 uart_pin: P1.10
microsteps: 16 microsteps: 16
interpolate: True interpolate: True
run_current: 0.7 run_current: 0.65
hold_current: 0.5 hold_current: 0.5
stealthchop_threshold: 200 stealthchop_threshold: 200
driver_PWM_AUTOGRAD: True driver_PWM_AUTOGRAD: True
@ -86,7 +88,7 @@ rotation_distance: 8
# step_distance: .0025 # step_distance: .0025
endstop_pin: P1.25 endstop_pin: P1.25
endstop_pin: probe:z_virtual_endstop endstop_pin: probe:z_virtual_endstop
position_endstop: 0 #position_endstop: 0
position_min: -1 position_min: -1
position_max: 250 position_max: 250
homing_retract_dist: 10 # to fix bltouch clone error homing_retract_dist: 10 # to fix bltouch clone error
@ -97,8 +99,7 @@ uart_pin: P1.8
microsteps: 16 microsteps: 16
interpolate: False interpolate: False
hold_current: 0.5 hold_current: 0.5
run_current: 0.95 run_current: 0.75
#gear_ratio: 3:1
stealthchop_threshold: 250 stealthchop_threshold: 250
#driver_PWM_AUTOGRAD: True #driver_PWM_AUTOGRAD: True
#driver_PWM_AUTOSCALE: True #driver_PWM_AUTOSCALE: True
@ -113,18 +114,23 @@ beta: 4267
step_pin: P2.13 step_pin: P2.13
dir_pin: !P0.11 dir_pin: !P0.11
enable_pin: !P2.12 enable_pin: !P2.12
rotation_distance: 7.18450
#0.00926 stock extruder #0.002409 #0.00926 stock extruder #0.002409
rotation_distance: 7.18450
# step_distance: 0.002245188 # step_distance: 0.002245188
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: P2.7 heater_pin: P2.7
sensor_type: 104NT-4-R025H42G #EPCOS 100K B57560G104F sensor_type: 104NT-4-R025H42G #EPCOS 100K B57560G104F
sensor_pin: P0.24 sensor_pin: P0.24
#control: pid
#pid_Kp: 22.2
#pid_Ki: 1.08
#pid_Kd: 114
min_temp: 0 min_temp: 0
max_temp: 290 max_temp: 290
pressure_advance: 0.23 pressure_advance: 0.23
max_extrude_only_velocity: 100 #max_extrude_only_velocity: 120
#max_extrude_only_accel: 1000
##################################################################################### #####################################################################################
@ -165,7 +171,7 @@ control_pin: P2.0
#pin_up_touch_mode_reports_triggered: False #pin_up_touch_mode_reports_triggered: False
x_offset: 11.684 #-60 x_offset: 11.684 #-60
y_offset: 40.199 #-13 y_offset: 40.199 #-13
z_offset: 3.1 #2.9 z_offset: 2.9 #2.9
samples: 2 samples: 2
#speed: 3 #speed: 3
@ -198,6 +204,42 @@ gcode:
PID_CALIBRATE HEATER=extruder TARGET=210 PID_CALIBRATE HEATER=extruder TARGET=210
SAVE_CONFIG SAVE_CONFIG
[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
default_parameter_X: 230 #edit to your park position
default_parameter_Y: 230 #edit to your park position
default_parameter_Z: 10 #edit to your park position
default_parameter_E: 1 #edit to your retract length
gcode:
SAVE_GCODE_STATE NAME=PAUSE_state
BASE_PAUSE
G91
G1 E-{E} F2100
G1 Z{Z}
G90
G1 X{X} Y{Y} F6000
[gcode_macro RESUME]
rename_existing: BASE_RESUME
default_parameter_E: 1 #edit to your retract length
gcode:
G91
G1 E{E} F2100
G90
RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
BASE_RESUME
[pause_resume]
[display_status]
[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
gcode:
TURN_OFF_HEATERS
CLEAR_PAUSE
SDCARD_RESET_FILE
BASE_CANCEL_PRINT
[bed_mesh] [bed_mesh]
speed: 100 speed: 100
@ -226,41 +268,41 @@ serial: /dev/serial/by-id/usb-Klipper_lpc1768_09A0FF10031436AF84F46A5BC72000F5-i
#*# [bed_mesh default] #*# [bed_mesh default]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500 #*# -0.177500, -0.145000, 0.010000, -0.015000
#*# 0.211250, 0.065000, -0.022500, -0.175000 #*# -0.122500, -0.120000, 0.015000, -0.035000
#*# 0.322500, 0.177500, 0.051250, -0.130000 #*# -0.082500, -0.055000, 0.053750, -0.037500
#*# 0.400000, 0.237500, 0.091250, -0.112500 #*# -0.027500, -0.018750, 0.065000, 0.010000
#*# tension = 0.2 #*# tension = 0.2
#*# min_x = -3.0 #*# min_x = 19.994
#*# algo = bicubic #*# algo = bicubic
#*# y_count = 4 #*# y_count = 4
#*# mesh_y_pps = 2 #*# mesh_y_pps = 2
#*# min_y = 20.0 #*# min_y = 94.999
#*# x_count = 4 #*# x_count = 4
#*# max_y = 206.99 #*# max_y = 229.999
#*# mesh_x_pps = 2 #*# mesh_x_pps = 2
#*# max_x = 159.99 #*# max_x = 224.984
#*# #*#
#*# [bed_mesh new] #*# [bed_mesh new]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# 0.201250, 0.036250, -0.055000, -0.187500 #*# -0.177500, -0.145000, 0.010000, -0.015000
#*# 0.211250, 0.065000, -0.022500, -0.175000 #*# -0.122500, -0.120000, 0.015000, -0.035000
#*# 0.322500, 0.177500, 0.051250, -0.130000 #*# -0.082500, -0.055000, 0.053750, -0.037500
#*# 0.400000, 0.237500, 0.091250, -0.112500 #*# -0.027500, -0.018750, 0.065000, 0.010000
#*# tension = 0.2 #*# tension = 0.2
#*# min_x = -3.0 #*# min_x = 19.994
#*# algo = bicubic #*# algo = bicubic
#*# y_count = 4 #*# y_count = 4
#*# mesh_y_pps = 2 #*# mesh_y_pps = 2
#*# min_y = 20.0 #*# min_y = 94.999
#*# x_count = 4 #*# x_count = 4
#*# max_y = 206.99 #*# max_y = 229.999
#*# mesh_x_pps = 2 #*# mesh_x_pps = 2
#*# max_x = 159.99 #*# max_x = 224.984
#*# #*#
#*# [extruder] #*# [extruder]
#*# control = pid #*# control = pid
#*# pid_kp = 22.427 #*# pid_kp = 21.448
#*# pid_ki = 1.168 #*# pid_ki = 0.953
#*# pid_kd = 107.652 #*# pid_kd = 120.647