131 lines
3.5 KiB
C
131 lines
3.5 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Cheaptronic v2.0 pin assignments
|
|
* Built and sold by Michal Dyntar - RRO
|
|
* www.reprapobchod.cz
|
|
*/
|
|
|
|
#ifndef __AVR_ATmega2560__
|
|
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#define BOARD_NAME "Cheaptronic v2.0"
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 30
|
|
#define X_MAX_PIN 31
|
|
#define Y_MIN_PIN 32
|
|
#define Y_MAX_PIN 33
|
|
#define Z_MIN_PIN 34
|
|
#define Z_MAX_PIN 35
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 17
|
|
#define X_DIR_PIN 16
|
|
#define X_ENABLE_PIN 48
|
|
|
|
#define Y_STEP_PIN 54
|
|
#define Y_DIR_PIN 47
|
|
#define Y_ENABLE_PIN 55
|
|
|
|
#define Z_STEP_PIN 57
|
|
#define Z_DIR_PIN 56
|
|
#define Z_ENABLE_PIN 62
|
|
|
|
#define E0_STEP_PIN 23
|
|
#define E0_DIR_PIN 22
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define E1_STEP_PIN 26
|
|
#define E1_DIR_PIN 25
|
|
#define E1_ENABLE_PIN 27
|
|
|
|
#define E2_STEP_PIN 29
|
|
#define E2_DIR_PIN 28
|
|
#define E2_ENABLE_PIN 39
|
|
|
|
//
|
|
// Temperature sensors
|
|
//
|
|
#define TEMP_0_PIN 15
|
|
#define TEMP_1_PIN 13
|
|
#define TEMP_2_PIN 14
|
|
#define TEMP_3_PIN 11 // should be used for chamber temperature control
|
|
#define TEMP_BED_PIN 12
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 6
|
|
#define HEATER_1_PIN 7
|
|
#define HEATER_2_PIN 8
|
|
#define HEATER_BED_PIN 9
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN 3
|
|
#endif
|
|
#define FAN2_PIN 58 // additional fan or light control output
|
|
|
|
//
|
|
// Other board specific pins
|
|
//
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
|
|
#endif
|
|
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
|
|
#define LED_PIN 13
|
|
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
|
|
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
|
|
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
|
|
#define PS_ON_PIN 45
|
|
#define KILL_PIN 46
|
|
|
|
#ifndef FILWIDTH_PIN
|
|
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
|
|
#endif
|
|
|
|
//
|
|
// LCD
|
|
//
|
|
#define LCD_PINS_RS 19
|
|
#define LCD_PINS_ENABLE 42
|
|
#define LCD_PINS_D4 18
|
|
#define LCD_PINS_D5 38
|
|
#define LCD_PINS_D6 41
|
|
#define LCD_PINS_D7 40
|
|
|
|
//
|
|
// SD CARD, ROTARY ENCODER, BEEPER
|
|
//
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define SD_DETECT_PIN 49
|
|
#define BEEPER_PIN 44
|
|
#define BTN_EN1 11
|
|
#define BTN_EN2 12
|
|
#define BTN_ENC 43
|