zwnk/Marlin_Ender3
Archived
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

first

Browse source
This commit is contained in:
dfriedrich 2019-03-21 10:43:51 -03:00
commit 60ece440f6
553 changed files with 361616 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

27
Marlin/Conditionals.h Normal file
View file

@ -0,0 +1,27 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Conditionals.h
* OBSOLETE: Replaced by Conditionals_LCD.h and Conditionals_post.h
*/
#error "Old configurations? Please delete all #include lines from Configuration.h and Configuration_adv.h."

528
Marlin/Conditionals_LCD.h Normal file
View file

@ -0,0 +1,528 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Conditionals_LCD.h
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
#ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first
#define CONDITIONALS_LCD_H
#define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
#if ENABLED(CARTESIO_UI)
#define DOGLCD
#define ULTIPANEL
#define DEFAULT_LCD_CONTRAST 90
#define LCD_CONTRAST_MIN 60
#define LCD_CONTRAST_MAX 140
#elif ENABLED(MAKRPANEL)
#define U8GLIB_ST7565_64128N
#elif ENABLED(ZONESTAR_LCD)
#define REPRAPWORLD_KEYPAD
#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
#define ADC_KEYPAD
#define ADC_KEY_NUM 8
#define ULTIPANEL
// this helps to implement ADC_KEYPAD menus
#define ENCODER_PULSES_PER_STEP 1
#define ENCODER_STEPS_PER_MENU_ITEM 1
#define ENCODER_FEEDRATE_DEADZONE 2
#define REVERSE_MENU_DIRECTION
#elif ENABLED(ANET_FULL_GRAPHICS_LCD)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#elif ENABLED(BQ_LCD_SMART_CONTROLLER)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#if ENABLED(miniVIKI)
#define LCD_CONTRAST_MIN 75
#define LCD_CONTRAST_MAX 115
#define DEFAULT_LCD_CONTRAST 95
#define U8GLIB_ST7565_64128N
#elif ENABLED(VIKI2)
#define LCD_CONTRAST_MIN 0
#define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 140
#define U8GLIB_ST7565_64128N
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define LCD_CONTRAST_MIN 90
#define LCD_CONTRAST_MAX 130
#define DEFAULT_LCD_CONTRAST 110
#define U8GLIB_LM6059_AF
#define SD_DETECT_INVERTED
#endif
#elif ENABLED(OLED_PANEL_TINYBOY2)
#define U8GLIB_SSD1306
#define ULTIPANEL
#define REVERSE_ENCODER_DIRECTION
#define REVERSE_MENU_DIRECTION
#elif ENABLED(RA_CONTROL_PANEL)
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define ULTIPANEL
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define DOGLCD
#define U8GLIB_ST7920
#define ULTIPANEL
#elif ENABLED(CR10_STOCKDISPLAY)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(125)
#endif
#ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(125)
#endif
#ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(125)
#endif
#elif ENABLED(MKS_12864OLED)
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#define U8GLIB_SH1106
#elif ENABLED(MKS_12864OLED_SSD1306)
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#define U8GLIB_SSD1306
#elif ENABLED(MKS_MINI_12864)
#define MINIPANEL
#endif
#if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
#define DOGLCD
#define ULTIPANEL
#define DEFAULT_LCD_CONTRAST 17
#endif
#if ENABLED(ULTI_CONTROLLER)
#define U8GLIB_SSD1309
#define REVERSE_ENCODER_DIRECTION
#define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin
#define LCD_CONTRAST_MIN 0
#define LCD_CONTRAST_MAX 254
#define DEFAULT_LCD_CONTRAST 127
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 2
#endif
// Generic support for SSD1306 / SSD1309 / SH1106 OLED based LCDs.
#if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SSD1309) || ENABLED(U8GLIB_SH1106)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for I2C LCD 128x64 (Controller SSD1306 / SSD1309 / SH1106 graphic Display Family)
#endif
#if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
#define ULTIMAKERCONTROLLER
#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
#if ENABLED(ULTIMAKERCONTROLLER) \
|| ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
|| ENABLED(G3D_PANEL) \
|| ENABLED(RIGIDBOT_PANEL) \
|| ENABLED(ULTI_CONTROLLER)
#define ULTIPANEL
#endif
#if ENABLED(REPRAPWORLD_KEYPAD)
#define NEWPANEL
#if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
#endif
#endif
/**
* I2C PANELS
*/
#if ENABLED(LCD_SAINSMART_I2C_1602) || ENABLED(LCD_SAINSMART_I2C_2004)
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define ULTRA_LCD
#if ENABLED(LCD_SAINSMART_I2C_2004)
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#endif
#elif ENABLED(LCD_I2C_PANELOLU2)
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional)
#define ULTIPANEL
#elif ENABLED(LCD_I2C_VIKI)
/**
* Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
*
* This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
* Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
* Note: The pause/stop/resume LCD button pin should be connected to the Arduino
* BTN_ENC pin (or set BTN_ENC to -1 if not used)
*/
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
#define ULTIPANEL
#define ENCODER_FEEDRATE_DEADZONE 4
#define STD_ENCODER_PULSES_PER_STEP 1
#define STD_ENCODER_STEPS_PER_MENU_ITEM 2
#elif ENABLED(G3D_PANEL)
#define STD_ENCODER_PULSES_PER_STEP 2
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
|| ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
|| ENABLED(OLED_PANEL_TINYBOY2) \
|| ENABLED(BQ_LCD_SMART_CONTROLLER) \
|| ENABLED(LCD_I2C_PANELOLU2) \
|| ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define STD_ENCODER_PULSES_PER_STEP 4
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef STD_ENCODER_PULSES_PER_STEP
#define STD_ENCODER_PULSES_PER_STEP 5
#endif
#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef ENCODER_PULSES_PER_STEP
#define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
#endif
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
#endif
#ifndef ENCODER_FEEDRATE_DEADZONE
#define ENCODER_FEEDRATE_DEADZONE 6
#endif
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#if ENABLED(SAV_3DLCD)
#define SR_LCD_2W_NL // Non latching 2 wire shift register
#define ULTIPANEL
#endif
#if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
#ifndef LCD_WIDTH
#ifdef LCD_WIDTH_OVERRIDE
#define LCD_WIDTH LCD_WIDTH_OVERRIDE
#else
#define LCD_WIDTH 22
#endif
#endif
#ifndef LCD_HEIGHT
#define LCD_HEIGHT 5
#endif
#endif
#if ENABLED(NO_LCD_MENUS)
#undef ULTIPANEL
#endif
#if ENABLED(ULTIPANEL)
#define NEWPANEL // Disable this if you actually have no click-encoder panel
#define ULTRA_LCD
#ifndef LCD_WIDTH
#define LCD_WIDTH 20
#endif
#ifndef LCD_HEIGHT
#define LCD_HEIGHT 4
#endif
#elif ENABLED(ULTRA_LCD) // no panel but just LCD
#ifndef LCD_WIDTH
#define LCD_WIDTH 16
#endif
#ifndef LCD_HEIGHT
#define LCD_HEIGHT 2
#endif
#endif
#if ENABLED(DOGLCD)
/* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
// \x00 intentionally skipped to avoid problems in strings
#define LCD_STR_REFRESH "\x01"
#define LCD_STR_FOLDER "\x02"
#define LCD_STR_ARROW_RIGHT "\x03"
#define LCD_STR_UPLEVEL "\x04"
#define LCD_STR_CLOCK "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_BEDTEMP "\x07"
#define LCD_STR_THERMOMETER "\x08"
#define LCD_STR_DEGREE "\x09"
#define LCD_STR_SPECIAL_MAX '\x09'
// Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
// Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
// Symbol characters
#define LCD_STR_FILAM_DIA "\xf8"
#define LCD_STR_FILAM_MUL "\xa4"
#else
// Custom characters defined in the first 8 characters of the LCD
#define LCD_BEDTEMP_CHAR 0x00 // Print only as a char. This will have 'unexpected' results when used in a string!
#define LCD_DEGREE_CHAR 0x01
#define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
#define LCD_UPLEVEL_CHAR 0x03
#define LCD_STR_REFRESH "\x04"
#define LCD_STR_FOLDER "\x05"
#define LCD_FEEDRATE_CHAR 0x06
#define LCD_CLOCK_CHAR 0x07
#define LCD_STR_ARROW_RIGHT ">" /* from the default character set */
#endif
/**
* Default LCD contrast for dogm-like LCD displays
*/
#if ENABLED(DOGLCD)
#define HAS_LCD_CONTRAST ( \
ENABLED(MAKRPANEL) \
|| ENABLED(CARTESIO_UI) \
|| ENABLED(VIKI2) \
|| ENABLED(miniVIKI) \
|| ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
)
#if HAS_LCD_CONTRAST
#ifndef LCD_CONTRAST_MIN
#define LCD_CONTRAST_MIN 0
#endif
#ifndef LCD_CONTRAST_MAX
#define LCD_CONTRAST_MAX 63
#endif
#ifndef DEFAULT_LCD_CONTRAST
#define DEFAULT_LCD_CONTRAST 32
#endif
#endif
#endif
// Boot screens
#if DISABLED(ULTRA_LCD)
#undef SHOW_BOOTSCREEN
#elif !defined(BOOTSCREEN_TIMEOUT)
#define BOOTSCREEN_TIMEOUT 2500
#endif
#define HAS_DEBUG_MENU (ENABLED(ULTIPANEL) && ENABLED(LCD_PROGRESS_BAR_TEST))
/**
* Extruders have some combination of stepper motors and hotends
* so we separate these concepts into the defines:
*
* EXTRUDERS - Number of Selectable Tools
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
*
*/
#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS
#if EXTRUDERS > 4
#define E_STEPPERS 3
#elif EXTRUDERS > 2
#define E_STEPPERS 2
#else
#define E_STEPPERS 1
#endif
#if DISABLED(SWITCHING_NOZZLE)
#define HOTENDS E_STEPPERS
#endif
#define E_MANUAL EXTRUDERS
#elif ENABLED(MIXING_EXTRUDER)
#define E_STEPPERS MIXING_STEPPERS
#define E_MANUAL 1
#else
#define E_STEPPERS EXTRUDERS
#define E_MANUAL EXTRUDERS
#endif
// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
#if ENABLED(MK2_MULTIPLEXER) || ENABLED(SWITCHING_NOZZLE)
#undef DISABLE_INACTIVE_EXTRUDER
#endif
// MK2 Multiplexer forces SINGLENOZZLE
#if ENABLED(MK2_MULTIPLEXER)
#define SINGLENOZZLE
#endif
#if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset
#undef HOTENDS
#define HOTENDS 1
#undef TEMP_SENSOR_1_AS_REDUNDANT
#undef HOTEND_OFFSET_X
#undef HOTEND_OFFSET_Y
#endif
#ifndef HOTENDS
#define HOTENDS EXTRUDERS
#endif
#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
/**
* DISTINCT_E_FACTORS affects how some E factors are accessed
*/
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
#define XYZE_N (XYZ + E_STEPPERS)
#if ENABLED(HANGPRINTER)
#define NUM_AXIS_N (ABCD + E_STEPPERS)
#else
#define NUM_AXIS_N (XYZ + E_STEPPERS)
#endif
#define E_AXIS_N (E_AXIS + extruder)
#else
#undef DISTINCT_E_FACTORS
#define XYZE_N XYZE
#if ENABLED(HANGPRINTER)
#define NUM_AXIS_N ABCDE
#else
#define NUM_AXIS_N XYZE
#endif
#define E_AXIS_N E_AXIS
#endif
/**
* The BLTouch Probe emulates a servo probe
* and uses "special" angles for its state.
*/
#if ENABLED(BLTOUCH)
#ifndef Z_PROBE_SERVO_NR
#define Z_PROBE_SERVO_NR 0
#endif
#ifndef NUM_SERVOS
#define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
#endif
#undef DEACTIVATE_SERVOS_AFTER_MOVE
#if NUM_SERVOS == 1
#undef SERVO_DELAY
#define SERVO_DELAY { 50 }
#endif
#ifndef BLTOUCH_DELAY
#define BLTOUCH_DELAY 375
#endif
#undef Z_SERVO_ANGLES
#define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
#define BLTOUCH_DEPLOY 10
#define BLTOUCH_STOW 90
#define BLTOUCH_SELFTEST 120
#define BLTOUCH_RESET 160
#define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
// Always disable probe pin inverting for BLTouch
#undef Z_MIN_PROBE_ENDSTOP_INVERTING
#define Z_MIN_PROBE_ENDSTOP_INVERTING false
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#undef Z_MIN_ENDSTOP_INVERTING
#define Z_MIN_ENDSTOP_INVERTING Z_MIN_PROBE_ENDSTOP_INVERTING
#define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
#else
#define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
#endif
#endif
/**
* Set a flag for a servo probe
*/
#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)
/**
* Set flags for enabled probes
*/
#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))
#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
#if !HAS_BED_PROBE
// Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef Z_MIN_PROBE_ENDSTOP
#elif ENABLED(Z_PROBE_ALLEN_KEY)
// Extra test for Allen Key Probe
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
#endif
#define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))
#define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
#define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
#define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED))
#define USE_MARLINSERIAL !(defined(__AVR__) && defined(USBCON))
#endif // CONDITIONALS_LCD_H

1417
Marlin/Conditionals_post.h Normal file
View file

File diff suppressed because it is too large Load diff

1927
Marlin/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

920
Marlin/G26_Mesh_Validation_Tool.cpp Normal file
View file

@ -0,0 +1,920 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Marlin Firmware -- G26 - Mesh Validation Tool
*/
#include "MarlinConfig.h"
#if ENABLED(G26_MESH_VALIDATION)
#include "Marlin.h"
#include "planner.h"
#include "stepper.h"
#include "temperature.h"
#include "ultralcd.h"
#include "parser.h"
#include "serial.h"
#include "bitmap_flags.h"
#if ENABLED(MESH_BED_LEVELING)
#include "mesh_bed_leveling.h"
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#include "ubl.h"
#endif
#define EXTRUSION_MULTIPLIER 1.0
#define RETRACTION_MULTIPLIER 1.0
#define PRIME_LENGTH 10.0
#define OOZE_AMOUNT 0.3
#define INTERSECTION_CIRCLE_RADIUS 5
#define CROSSHAIRS_SIZE 3
#if CROSSHAIRS_SIZE >= INTERSECTION_CIRCLE_RADIUS
#error "CROSSHAIRS_SIZE must be less than INTERSECTION_CIRCLE_RADIUS."
#endif
#define G26_OK false
#define G26_ERR true
/**
* G26 Mesh Validation Tool
*
* G26 is a Mesh Validation Tool intended to provide support for the Marlin Unified Bed Leveling System.
* In order to fully utilize and benefit from the Marlin Unified Bed Leveling System an accurate Mesh must
* be defined. G29 is designed to allow the user to quickly validate the correctness of her Mesh. It will
* first heat the bed and nozzle. It will then print lines and circles along the Mesh Cell boundaries and
* the intersections of those lines (respectively).
*
* This action allows the user to immediately see where the Mesh is properly defined and where it needs to
* be edited. The command will generate the Mesh lines closest to the nozzle's starting position. Alternatively
* the user can specify the X and Y position of interest with command parameters. This allows the user to
* focus on a particular area of the Mesh where attention is needed.
*
* B # Bed Set the Bed Temperature. If not specified, a default of 60 C. will be assumed.
*
* C Current When searching for Mesh Intersection points to draw, use the current nozzle location
* as the base for any distance comparison.
*
* D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this
* command to see how well a Mesh as been adjusted to match a print surface. In order to do
* this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
* alters the command's normal behaviour and disables the Unified Bed Leveling System even if
* it is on.
*
* H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
*
* F # Filament Used to specify the diameter of the filament being used. If not specified
* 1.75mm filament is assumed. If you are not getting acceptable results by using the
* 'correct' numbers, you can scale this number up or down a little bit to change the amount
* of filament that is being extruded during the printing of the various lines on the bed.
*
* K Keep-On Keep the heaters turned on at the end of the command.
*
* L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used.
*
* O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This
* is over kill, but using this parameter will let you get the very first 'circle' perfect
* so you have a trophy to peel off of the bed and hang up to show how perfectly you have your
* Mesh calibrated. If not specified, a filament length of .3mm is assumed.
*
* P # Prime Prime the nozzle with specified length of filament. If this parameter is not
* given, no prime action will take place. If the parameter specifies an amount, that much
* will be purged before continuing. If no amount is specified the command will start
* purging filament until the user provides an LCD Click and then it will continue with
* printing the Mesh. You can carefully remove the spent filament with a needle nose
* pliers while holding the LCD Click wheel in a depressed state. If you do not have
* an LCD, you must specify a value if you use P.
*
* Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and
* un-retraction is at 1.2mm These numbers will be scaled by the specified amount
*
* R # Repeat Prints the number of patterns given as a parameter, starting at the current location.
* If a parameter isn't given, every point will be printed unless G26 is interrupted.
* This works the same way that the UBL G29 P4 R parameter works.
*
* NOTE: If you do not have an LCD, you -must- specify R. This is to ensure that you are
* aware that there's some risk associated with printing without the ability to abort in
* cases where mesh point Z value may be inaccurate. As above, if you do not include a
* parameter, every point will be printed.
*
* S # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed.
*
* U # Random Randomize the order that the circles are drawn on the bed. The search for the closest
* undrawn cicle is still done. But the distance to the location for each circle has a
* random number of the size specified added to it. Specifying S50 will give an interesting
* deviation from the normal behaviour on a 10 x 10 Mesh.
*
* X # X Coord. Specify the starting location of the drawing activity.
*
* Y # Y Coord. Specify the starting location of the drawing activity.
*/
// External references
extern Planner planner;
// Private functions
static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16];
float g26_e_axis_feedrate = 0.025,
random_deviation = 0.0;
static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched
// retracts/recovers won't result in a bad state.
static float g26_extrusion_multiplier,
g26_retraction_multiplier,
g26_layer_height,
g26_prime_length,
g26_x_pos, g26_y_pos;
static int16_t g26_bed_temp,
g26_hotend_temp;
static int8_t g26_prime_flag;
#if ENABLED(ULTIPANEL)
/**
* If the LCD is clicked, cancel, wait for release, return true
*/
bool user_canceled() {
if (!is_lcd_clicked()) return false; // Return if the button isn't pressed
lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99);
#if ENABLED(ULTIPANEL)
lcd_quick_feedback(true);
#endif
wait_for_release();
return true;
}
bool exit_from_g26() {
lcd_setstatusPGM(PSTR("Leaving G26"), -1);
wait_for_release();
return G26_ERR;
}
#endif
void G26_line_to_destination(const float &feed_rate) {
const float save_feedrate = feedrate_mm_s;
feedrate_mm_s = feed_rate;
prepare_move_to_destination(); // will ultimately call ubl.line_to_destination_cartesian or ubl.prepare_linear_move_to for UBL_SEGMENTED
feedrate_mm_s = save_feedrate;
}
void move_to(const float &rx, const float &ry, const float &z, const float &e_delta) {
float feed_value;
static float last_z = -999.99;
bool has_xy_component = (rx != current_position[X_AXIS] || ry != current_position[Y_AXIS]); // Check if X or Y is involved in the movement.
if (z != last_z) {
last_z = z;
feed_value = planner.max_feedrate_mm_s[Z_AXIS]/(3.0); // Base the feed rate off of the configured Z_AXIS feed rate
destination[X_AXIS] = current_position[X_AXIS];
destination[Y_AXIS] = current_position[Y_AXIS];
destination[Z_AXIS] = z; // We know the last_z==z or we wouldn't be in this block of code.
destination[E_CART] = current_position[E_CART];
G26_line_to_destination(feed_value);
set_destination_from_current();
}
// Check if X or Y is involved in the movement.
// Yes: a 'normal' movement. No: a retract() or recover()
feed_value = has_xy_component ? PLANNER_XY_FEEDRATE() / 10.0 : planner.max_feedrate_mm_s[E_AXIS] / 1.5;
if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value);
destination[X_AXIS] = rx;
destination[Y_AXIS] = ry;
destination[E_CART] += e_delta;
G26_line_to_destination(feed_value);
set_destination_from_current();
}
FORCE_INLINE void move_to(const float where[XYZE], const float &de) { move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de); }
void retract_filament(const float where[XYZE]) {
if (!g26_retracted) { // Only retract if we are not already retracted!
g26_retracted = true;
move_to(where, -1.0 * g26_retraction_multiplier);
}
}
void recover_filament(const float where[XYZE]) {
if (g26_retracted) { // Only un-retract if we are retracted.
move_to(where, 1.2 * g26_retraction_multiplier);
g26_retracted = false;
}
}
/**
* Prime the nozzle if needed. Return true on error.
*/
inline bool prime_nozzle() {
#if ENABLED(ULTIPANEL)
float Total_Prime = 0.0;
if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged
lcd_external_control = true;
lcd_setstatusPGM(PSTR("User-Controlled Prime"), 99);
lcd_chirp();
set_destination_from_current();
recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
while (!is_lcd_clicked()) {
lcd_chirp();
destination[E_CART] += 0.25;
#ifdef PREVENT_LENGTHY_EXTRUDE
Total_Prime += 0.25;
if (Total_Prime >= EXTRUDE_MAXLENGTH) return G26_ERR;
#endif
G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
set_destination_from_current();
planner.synchronize(); // Without this synchronize, the purge is more consistent,
// but because the planner has a buffer, we won't be able
// to stop as quickly. So we put up with the less smooth
// action to give the user a more responsive 'Stop'.
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
}
wait_for_release();
lcd_setstatusPGM(PSTR("Done Priming"), 99);
lcd_quick_feedback(true);
lcd_external_control = false;
}
else
#endif
{
#if ENABLED(ULTRA_LCD)
lcd_setstatusPGM(PSTR("Fixed Length Prime."), 99);
lcd_quick_feedback(true);
#endif
set_destination_from_current();
destination[E_CART] += g26_prime_length;
G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
set_destination_from_current();
retract_filament(destination);
}
return G26_OK;
}
mesh_index_pair find_closest_circle_to_print(const float &X, const float &Y) {
float closest = 99999.99;
mesh_index_pair return_val;
return_val.x_index = return_val.y_index = -1;
for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
if (!is_bitmap_set(circle_flags, i, j)) {
const float mx = _GET_MESH_X(i), // We found a circle that needs to be printed
my = _GET_MESH_Y(j);
// Get the distance to this intersection
float f = HYPOT(X - mx, Y - my);
// It is possible that we are being called with the values
// to let us find the closest circle to the start position.
// But if this is not the case, add a small weighting to the
// distance calculation to help it choose a better place to continue.
f += HYPOT(g26_x_pos - mx, g26_y_pos - my) / 15.0;
// Add in the specified amount of Random Noise to our search
if (random_deviation > 1.0)
f += random(0.0, random_deviation);
if (f < closest) {
closest = f; // We found a closer location that is still
return_val.x_index = i; // un-printed --- save the data for it
return_val.y_index = j;
return_val.distance = closest;
}
}
}
}
bitmap_set(circle_flags, return_val.x_index, return_val.y_index); // Mark this location as done.
return return_val;
}
/**
* print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one
* to the other. But there are really three sets of coordinates involved. The first coordinate
* is the present location of the nozzle. We don't necessarily want to print from this location.
* We first need to move the nozzle to the start of line segment where we want to print. Once
* there, we can use the two coordinates supplied to draw the line.
*
* Note: Although we assume the first set of coordinates is the start of the line and the second
* set of coordinates is the end of the line, it does not always work out that way. This function
* optimizes the movement to minimize the travel distance before it can start printing. This saves
* a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does
* cause a lot of very little short retracement of th nozzle when it draws the very first line
* segment of a 'circle'. The time this requires is very short and is easily saved by the other
* cases where the optimization comes into play.
*/
void print_line_from_here_to_there(const float &sx, const float &sy, const float &sz, const float &ex, const float &ey, const float &ez) {
const float dx_s = current_position[X_AXIS] - sx, // find our distance from the start of the actual line segment
dy_s = current_position[Y_AXIS] - sy,
dist_start = HYPOT2(dx_s, dy_s), // We don't need to do a sqrt(), we can compare the distance^2
// to save computation time
dx_e = current_position[X_AXIS] - ex, // find our distance from the end of the actual line segment
dy_e = current_position[Y_AXIS] - ey,
dist_end = HYPOT2(dx_e, dy_e),
line_length = HYPOT(ex - sx, ey - sy);
// If the end point of the line is closer to the nozzle, flip the direction,
// moving from the end to the start. On very small lines the optimization isn't worth it.
if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length))
return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
// Decide whether to retract & bump
if (dist_start > 2.0) {
retract_filament(destination);
//todo: parameterize the bump height with a define
move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0); // Z bump to minimize scraping
move_to(sx, sy, sz + 0.500, 0.0); // Get to the starting point with no extrusion while bumped
}
move_to(sx, sy, sz, 0.0); // Get to the starting point with no extrusion / un-Z bump
const float e_pos_delta = line_length * g26_e_axis_feedrate * g26_extrusion_multiplier;
recover_filament(destination);
move_to(ex, ey, ez, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion
}
inline bool look_for_lines_to_connect() {
float sx, sy, ex, ey;
for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
#if ENABLED(ULTIPANEL)
if (user_canceled()) return true; // Check if the user wants to stop the Mesh Validation
#endif
if (i < GRID_MAX_POINTS_X) { // We can't connect to anything to the right than GRID_MAX_POINTS_X.
// This is already a half circle because we are at the edge of the bed.
if (is_bitmap_set(circle_flags, i, j) && is_bitmap_set(circle_flags, i + 1, j)) { // check if we can do a line to the left
if (!is_bitmap_set(horizontal_mesh_line_flags, i, j)) {
//
// We found two circles that need a horizontal line to connect them
// Print it!
//
sx = _GET_MESH_X( i ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge
ex = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge
sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1);
sy = ey = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1);
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) {
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx);
SERIAL_ECHOPAIR(", sy=", sy);
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL();
//debug_current_and_destination(PSTR("Connecting horizontal line."));
}
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);
}
bitmap_set(horizontal_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if we skipped it
}
}
if (j < GRID_MAX_POINTS_Y) { // We can't connect to anything further back than GRID_MAX_POINTS_Y.
// This is already a half circle because we are at the edge of the bed.
if (is_bitmap_set(circle_flags, i, j) && is_bitmap_set(circle_flags, i, j + 1)) { // check if we can do a line straight down
if (!is_bitmap_set( vertical_mesh_line_flags, i, j)) {
//
// We found two circles that need a vertical line to connect them
// Print it!
//
sy = _GET_MESH_Y( j ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge
ey = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge
sx = ex = constrain(_GET_MESH_X(i), X_MIN_POS + 1, X_MAX_POS - 1);
sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1);
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) {
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" Connecting with vertical line (sx=", sx);
SERIAL_ECHOPAIR(", sy=", sy);
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL();
#if ENABLED(AUTO_BED_LEVELING_UBL)
debug_current_and_destination(PSTR("Connecting vertical line."));
#endif
}
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);
}
bitmap_set(vertical_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if skipped
}
}
}
}
}
}
return false;
}
/**
* Turn on the bed and nozzle heat and
* wait for them to get up to temperature.
*/
inline bool turn_on_heaters() {
millis_t next = millis() + 5000UL;
#if HAS_HEATED_BED
#if ENABLED(ULTRA_LCD)
if (g26_bed_temp > 25) {
lcd_setstatusPGM(PSTR("G26 Heating Bed."), 99);
lcd_quick_feedback(true);
#if ENABLED(ULTIPANEL)
lcd_external_control = true;
#endif
#endif
thermalManager.setTargetBed(g26_bed_temp);
while (ABS(thermalManager.degBed() - g26_bed_temp) > 3) {
#if ENABLED(ULTIPANEL)
if (is_lcd_clicked()) return exit_from_g26();
#endif
if (ELAPSED(millis(), next)) {
next = millis() + 5000UL;
thermalManager.print_heaterstates();
SERIAL_EOL();
}
idle();
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
}
#if ENABLED(ULTRA_LCD)
}
lcd_setstatusPGM(PSTR("G26 Heating Nozzle."), 99);
lcd_quick_feedback(true);
#endif
#endif
// Start heating the nozzle and wait for it to reach temperature.
thermalManager.setTargetHotend(g26_hotend_temp, 0);
while (ABS(thermalManager.degHotend(0) - g26_hotend_temp) > 3) {
#if ENABLED(ULTIPANEL)
if (is_lcd_clicked()) return exit_from_g26();
#endif
if (ELAPSED(millis(), next)) {
next = millis() + 5000UL;
thermalManager.print_heaterstates();
SERIAL_EOL();
}
idle();
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
}
#if ENABLED(ULTRA_LCD)
lcd_reset_status();
lcd_quick_feedback(true);
#endif
return G26_OK;
}
float valid_trig_angle(float d) {
while (d > 360.0) d -= 360.0;
while (d < 0.0) d += 360.0;
return d;
}
/**
* G26: Mesh Validation Pattern generation.
*
* Used to interactively edit the mesh by placing the
* nozzle in a problem area and doing a G29 P4 R command.
*
* Parameters:
*
* B Bed Temperature
* C Continue from the Closest mesh point
* D Disable leveling before starting
* F Filament diameter
* H Hotend Temperature
* K Keep heaters on when completed
* L Layer Height
* O Ooze extrusion length
* P Prime length
* Q Retraction multiplier
* R Repetitions (number of grid points)
* S Nozzle Size (diameter) in mm
* U Random deviation (50 if no value given)
* X X position
* Y Y position
*/
void gcode_G26() {
SERIAL_ECHOLNPGM("G26 command started. Waiting for heater(s).");
// Don't allow Mesh Validation without homing first,
// or if the parameter parsing did not go OK, abort
if (axis_unhomed_error()) return;
g26_extrusion_multiplier = EXTRUSION_MULTIPLIER;
g26_retraction_multiplier = RETRACTION_MULTIPLIER;
g26_layer_height = MESH_TEST_LAYER_HEIGHT;
g26_prime_length = PRIME_LENGTH;
g26_bed_temp = MESH_TEST_BED_TEMP;
g26_hotend_temp = MESH_TEST_HOTEND_TEMP;
g26_prime_flag = 0;
float g26_nozzle = MESH_TEST_NOZZLE_SIZE,
g26_filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA,
g26_ooze_amount = parser.linearval('O', OOZE_AMOUNT);
bool g26_continue_with_closest = parser.boolval('C'),
g26_keep_heaters_on = parser.boolval('K');
if (parser.seenval('B')) {
g26_bed_temp = parser.value_celsius();
if (g26_bed_temp && !WITHIN(g26_bed_temp, 40, 140)) {
SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible (40-140C).");
return;
}
}
if (parser.seenval('L')) {
g26_layer_height = parser.value_linear_units();
if (!WITHIN(g26_layer_height, 0.0, 2.0)) {
SERIAL_PROTOCOLLNPGM("?Specified layer height not plausible.");
return;
}
}
if (parser.seen('Q')) {
if (parser.has_value()) {
g26_retraction_multiplier = parser.value_float();
if (!WITHIN(g26_retraction_multiplier, 0.05, 15.0)) {
SERIAL_PROTOCOLLNPGM("?Specified Retraction Multiplier not plausible.");
return;
}
}
else {
SERIAL_PROTOCOLLNPGM("?Retraction Multiplier must be specified.");
return;
}
}
if (parser.seenval('S')) {
g26_nozzle = parser.value_float();
if (!WITHIN(g26_nozzle, 0.1, 1.0)) {
SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible.");
return;
}
}
if (parser.seen('P')) {
if (!parser.has_value()) {
#if ENABLED(ULTIPANEL)
g26_prime_flag = -1;
#else
SERIAL_PROTOCOLLNPGM("?Prime length must be specified when not using an LCD.");
return;
#endif
}
else {
g26_prime_flag++;
g26_prime_length = parser.value_linear_units();
if (!WITHIN(g26_prime_length, 0.0, 25.0)) {
SERIAL_PROTOCOLLNPGM("?Specified prime length not plausible.");
return;
}
}
}
if (parser.seenval('F')) {
g26_filament_diameter = parser.value_linear_units();
if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) {
SERIAL_PROTOCOLLNPGM("?Specified filament size not plausible.");
return;
}
}
g26_extrusion_multiplier *= sq(1.75) / sq(g26_filament_diameter); // If we aren't using 1.75mm filament, we need to
// scale up or down the length needed to get the
// same volume of filament
g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
if (parser.seenval('H')) {
g26_hotend_temp = parser.value_celsius();
if (!WITHIN(g26_hotend_temp, 165, 280)) {
SERIAL_PROTOCOLLNPGM("?Specified nozzle temperature not plausible.");
return;
}
}
if (parser.seen('U')) {
randomSeed(millis());
// This setting will persist for the next G26
random_deviation = parser.has_value() ? parser.value_float() : 50.0;
}
int16_t g26_repeats;
#if ENABLED(ULTIPANEL)
g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1);
#else
if (!parser.seen('R')) {
SERIAL_PROTOCOLLNPGM("?(R)epeat must be specified when not using an LCD.");
return;
}
else
g26_repeats = parser.has_value() ? parser.value_int() : GRID_MAX_POINTS + 1;
#endif
if (g26_repeats < 1) {
SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be at least 1.");
return;
}
g26_x_pos = parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position[X_AXIS];
g26_y_pos = parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position[Y_AXIS];
if (!position_is_reachable(g26_x_pos, g26_y_pos)) {
SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
return;
}
/**
* Wait until all parameters are verified before altering the state!
*/
set_bed_leveling_enabled(!parser.seen('D'));
if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) {
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
set_current_from_destination();
}
if (turn_on_heaters() != G26_OK) goto LEAVE;
current_position[E_CART] = 0.0;
sync_plan_position_e();
if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE;
/**
* Bed is preheated
*
* Nozzle is at temperature
*
* Filament is primed!
*
* It's "Show Time" !!!
*/
ZERO(circle_flags);
ZERO(horizontal_mesh_line_flags);
ZERO(vertical_mesh_line_flags);
// Move nozzle to the specified height for the first layer
set_destination_from_current();
destination[Z_AXIS] = g26_layer_height;
move_to(destination, 0.0);
move_to(destination, g26_ooze_amount);
#if ENABLED(ULTIPANEL)
lcd_external_control = true;
#endif
//debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
#if DISABLED(ARC_SUPPORT)
/**
* Pre-generate radius offset values at 30 degree intervals to reduce CPU load.
*/
#define A_INT 30
#define _ANGS (360 / A_INT)
#define A_CNT (_ANGS / 2)
#define _IND(A) ((A + _ANGS * 8) % _ANGS)
#define _COS(A) (trig_table[_IND(A) % A_CNT] * (_IND(A) >= A_CNT ? -1 : 1))
#define _SIN(A) (-_COS((A + A_CNT / 2) % _ANGS))
#if A_CNT & 1
#error "A_CNT must be a positive value. Please change A_INT."
#endif
float trig_table[A_CNT];
for (uint8_t i = 0; i < A_CNT; i++)
trig_table[i] = INTERSECTION_CIRCLE_RADIUS * cos(RADIANS(i * A_INT));
#endif // !ARC_SUPPORT
mesh_index_pair location;
do {
location = g26_continue_with_closest
? find_closest_circle_to_print(current_position[X_AXIS], current_position[Y_AXIS])
: find_closest_circle_to_print(g26_x_pos, g26_y_pos); // Find the closest Mesh Intersection to where we are now.
if (location.x_index >= 0 && location.y_index >= 0) {
const float circle_x = _GET_MESH_X(location.x_index),
circle_y = _GET_MESH_Y(location.y_index);
// If this mesh location is outside the printable_radius, skip it.
if (!position_is_reachable(circle_x, circle_y)) continue;
// Determine where to start and end the circle,
// which is always drawn counter-clockwise.
const uint8_t xi = location.x_index, yi = location.y_index;
const bool f = yi == 0, r = xi >= GRID_MAX_POINTS_X - 1, b = yi >= GRID_MAX_POINTS_Y - 1;
#if ENABLED(ARC_SUPPORT)
#define ARC_LENGTH(quarters) (INTERSECTION_CIRCLE_RADIUS * M_PI * (quarters) / 2)
float sx = circle_x + INTERSECTION_CIRCLE_RADIUS, // default to full circle
ex = circle_x + INTERSECTION_CIRCLE_RADIUS,
sy = circle_y, ey = circle_y,
arc_length = ARC_LENGTH(4);
// Figure out where to start and end the arc - we always print counterclockwise
if (xi == 0) { // left edge
sx = f ? circle_x + INTERSECTION_CIRCLE_RADIUS : circle_x;
ex = b ? circle_x + INTERSECTION_CIRCLE_RADIUS : circle_x;
sy = f ? circle_y : circle_y - INTERSECTION_CIRCLE_RADIUS;
ey = b ? circle_y : circle_y + INTERSECTION_CIRCLE_RADIUS;
arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2);
}
else if (r) { // right edge
sx = b ? circle_x - INTERSECTION_CIRCLE_RADIUS : circle_x;
ex = f ? circle_x - INTERSECTION_CIRCLE_RADIUS : circle_x;
sy = b ? circle_y : circle_y + INTERSECTION_CIRCLE_RADIUS;
ey = f ? circle_y : circle_y - INTERSECTION_CIRCLE_RADIUS;
arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2);
}
else if (f) {
sx = circle_x + INTERSECTION_CIRCLE_RADIUS;
ex = circle_x - INTERSECTION_CIRCLE_RADIUS;
sy = ey = circle_y;
arc_length = ARC_LENGTH(2);
}
else if (b) {
sx = circle_x - INTERSECTION_CIRCLE_RADIUS;
ex = circle_x + INTERSECTION_CIRCLE_RADIUS;
sy = ey = circle_y;
arc_length = ARC_LENGTH(2);
}
const float arc_offset[2] = {
circle_x - sx,
circle_y - sy
};
const float dx_s = current_position[X_AXIS] - sx, // find our distance from the start of the actual circle
dy_s = current_position[Y_AXIS] - sy,
dist_start = HYPOT2(dx_s, dy_s);
const float endpoint[XYZE] = {
ex, ey,
g26_layer_height,
current_position[E_CART] + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier)
};
if (dist_start > 2.0) {
retract_filament(destination);
//todo: parameterize the bump height with a define
move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0); // Z bump to minimize scraping
move_to(sx, sy, g26_layer_height + 0.500, 0.0); // Get to the starting point with no extrusion while bumped
}
move_to(sx, sy, g26_layer_height, 0.0); // Get to the starting point with no extrusion / un-Z bump
recover_filament(destination);
const float save_feedrate = feedrate_mm_s;
feedrate_mm_s = PLANNER_XY_FEEDRATE() / 10.0;
plan_arc(endpoint, arc_offset, false); // Draw a counter-clockwise arc
feedrate_mm_s = save_feedrate;
set_destination_from_current();
#if ENABLED(ULTIPANEL)
if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
#endif
#else // !ARC_SUPPORT
int8_t start_ind = -2, end_ind = 9; // Assume a full circle (from 5:00 to 5:00)
if (xi == 0) { // Left edge? Just right half.
start_ind = f ? 0 : -3; // 03:00 to 12:00 for front-left
end_ind = b ? 0 : 2; // 06:00 to 03:00 for back-left
}
else if (r) { // Right edge? Just left half.
start_ind = b ? 6 : 3; // 12:00 to 09:00 for front-right
end_ind = f ? 5 : 8; // 09:00 to 06:00 for back-right
}
else if (f) { // Front edge? Just back half.
start_ind = 0; // 03:00
end_ind = 5; // 09:00
}
else if (b) { // Back edge? Just front half.
start_ind = 6; // 09:00
end_ind = 11; // 03:00
}
for (int8_t ind = start_ind; ind <= end_ind; ind++) {
#if ENABLED(ULTIPANEL)
if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
#endif
float rx = circle_x + _COS(ind), // For speed, these are now a lookup table entry
ry = circle_y + _SIN(ind),
xe = circle_x + _COS(ind + 1),
ye = circle_y + _SIN(ind + 1);
#if IS_KINEMATIC
// Check to make sure this segment is entirely on the bed, skip if not.
if (!position_is_reachable(rx, ry) || !position_is_reachable(xe, ye)) continue;
#else // not, we need to skip
rx = constrain(rx, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
ry = constrain(ry, Y_MIN_POS + 1, Y_MAX_POS - 1);
xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1);
ye = constrain(ye, Y_MIN_POS + 1, Y_MAX_POS - 1);
#endif
print_line_from_here_to_there(rx, ry, g26_layer_height, xe, ye, g26_layer_height);
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
}
#endif // !ARC_SUPPORT
if (look_for_lines_to_connect()) goto LEAVE;
}
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
} while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
LEAVE:
lcd_setstatusPGM(PSTR("Leaving G26"), -1);
retract_filament(destination);
destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;
//debug_current_and_destination(PSTR("ready to do Z-Raise."));
move_to(destination, 0); // Raise the nozzle
//debug_current_and_destination(PSTR("done doing Z-Raise."));
destination[X_AXIS] = g26_x_pos; // Move back to the starting position
destination[Y_AXIS] = g26_y_pos;
//destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is
move_to(destination, 0); // Move back to the starting position
//debug_current_and_destination(PSTR("done doing X/Y move."));
#if ENABLED(ULTIPANEL)
lcd_external_control = false; // Give back control of the LCD Panel!
#endif
if (!g26_keep_heaters_on) {
#if HAS_HEATED_BED
thermalManager.setTargetBed(0);
#endif
thermalManager.setTargetHotend(0, 0);
}
}
#endif // G26_MESH_VALIDATION

337
Marlin/HAL.h Normal file
View file

@ -0,0 +1,337 @@
/* **************************************************************************
Marlin 3D Printer Firmware
Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
****************************************************************************/
/**
* Description: HAL for __AVR__
*/
#ifndef _HAL_AVR_H_
#define _HAL_AVR_H_
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "fastio.h"
#include <stdint.h>
#include <Arduino.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include <avr/io.h>
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------
//#define analogInputToDigitalPin(IO) IO
// Bracket code that shouldn't be interrupted
#ifndef CRITICAL_SECTION_START
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli()
#define CRITICAL_SECTION_END SREG = _sreg
#endif
#define ISRS_ENABLED() TEST(SREG, SREG_I)
#define ENABLE_ISRS() sei()
#define DISABLE_ISRS() cli()
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef uint16_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFF
typedef int8_t pin_t;
#define HAL_SERVO_LIB Servo
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
//extern uint8_t MCUSR;
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
//void cli(void);
//void _delay_ms(const int delay);
inline void HAL_clear_reset_source(void) { MCUSR = 0; }
inline uint8_t HAL_get_reset_source(void) { return MCUSR; }
// eeprom
//void eeprom_write_byte(unsigned char *pos, unsigned char value);
//unsigned char eeprom_read_byte(unsigned char *pos);
// timers
#define HAL_TIMER_RATE ((F_CPU) / 8) // i.e., 2MHz or 2.5MHz
#define STEP_TIMER_NUM 1
#define TEMP_TIMER_NUM 0
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define TEMP_TIMER_FREQUENCY ((F_CPU) / 64.0 / 256.0)
#define STEPPER_TIMER_RATE HAL_TIMER_RATE
#define STEPPER_TIMER_PRESCALE 8
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
UNUSED(frequency);
switch (timer_num) {
case STEP_TIMER_NUM:
// waveform generation = 0100 = CTC
SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected)
SET_COMA(1, NORMAL);
// Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting
// (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
OCR1A = 0x4000;
TCNT1 = 0;
break;
case TEMP_TIMER_NUM:
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
break;
}
}
#define TIMER_OCR_1 OCR1A
#define TIMER_COUNTER_1 TCNT1
#define TIMER_OCR_0 OCR0A
#define TIMER_COUNTER_0 TCNT0
#define _CAT(a, ...) a ## __VA_ARGS__
#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
/**
* On AVR there is no hardware prioritization and preemption of
* interrupts, so this emulates it. The UART has first priority
* (otherwise, characters will be lost due to UART overflow).
* Then: Stepper, Endstops, Temperature, and -finally- all others.
*/
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)
/* 18 cycles maximum latency */
#define HAL_STEP_TIMER_ISR \
extern "C" void TIMER1_COMPA_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER1_COMPA_vect_bottom (void) asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER1_COMPA_vect (void) { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("push r16") /* 2 Save TIMSK0 into the stack */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("lds r16, %[timsk1]") /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
A("andi r16,~%[msk1]") /* 1 Disable the stepper ISR */ \
A("sts %[timsk1], r16") /* 2 And set the new value */ \
A("push r16") /* 2 Save TIMSK1 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
A("ori r16,%[msk1]") /* 1 Reenable the stepper ISR */ \
A("cli") /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
A("sts %[timsk1], r16") /* 2 And restore the old value - This reenables the stepper ISR */ \
A("pop r16") /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
A("sts %[timsk0], r16") /* 2 And restore the old value - This reenables the temperature ISR */ \
A("pop r16") /* 2 Get the old SREG value */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 value */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i" ((uint16_t)&TIMSK0), \
[timsk1] "i" ((uint16_t)&TIMSK1), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)),\
[msk1] "M" ((uint8_t)(1<<OCIE1A)) \
: \
); \
} \
void TIMER1_COMPA_vect_bottom(void)
/* 14 cycles maximum latency */
#define HAL_TEMP_TIMER_ISR \
extern "C" void TIMER0_COMPB_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER0_COMPB_vect_bottom(void) asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER0_COMPB_vect (void) { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("sei") /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */ \
A("push r16") /* 2 Save TIMSK0 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER0_COMPB_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
A("ori r16,%[msk0]") /* 1 Enable temperature ISR */ \
A("cli") /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
A("sts %[timsk0], r16") /* 2 And restore the old value */ \
A("pop r16") /* 2 Get the old SREG */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i"((uint16_t)&TIMSK0), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)) \
: \
); \
} \
void TIMER0_COMPB_vect_bottom(void)
// ADC
#ifdef DIDR2
#define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin & 0x07); }while(0)
#else
#define HAL_ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0)
#endif
inline void HAL_adc_init(void) {
ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
DIDR0 = 0;
#ifdef DIDR2
DIDR2 = 0;
#endif
}
#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC)
#ifdef MUX5
#define HAL_START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
#else
#define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
#endif
#define HAL_READ_ADC() ADC
#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
#define HAL_SENSITIVE_PINS 0, 1
#endif // _HAL_AVR_H_

1140
Marlin/I2CPositionEncoder.cpp Normal file
View file

File diff suppressed because it is too large Load diff

342
Marlin/I2CPositionEncoder.h Normal file
View file

@ -0,0 +1,342 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef I2CPOSENC_H
#define I2CPOSENC_H
#include "MarlinConfig.h"
#if ENABLED(I2C_POSITION_ENCODERS)
#include "enum.h"
#include "macros.h"
#include "types.h"
#include <Wire.h>
//=========== Advanced / Less-Common Encoder Configuration Settings ==========
#define I2CPE_EC_THRESH_PROPORTIONAL // if enabled adjusts the error correction threshold
// proportional to the current speed of the axis allows
// for very small error margin at low speeds without
// stuttering due to reading latency at high speeds
#define I2CPE_DEBUG // enable encoder-related debug serial echos
#define I2CPE_REBOOT_TIME 5000 // time we wait for an encoder module to reboot
// after changing address.
#define I2CPE_MAG_SIG_GOOD 0
#define I2CPE_MAG_SIG_MID 1
#define I2CPE_MAG_SIG_BAD 2
#define I2CPE_MAG_SIG_NF 255
#define I2CPE_REQ_REPORT 0
#define I2CPE_RESET_COUNT 1
#define I2CPE_SET_ADDR 2
#define I2CPE_SET_REPORT_MODE 3
#define I2CPE_CLEAR_EEPROM 4
#define I2CPE_LED_PAR_MODE 10
#define I2CPE_LED_PAR_BRT 11
#define I2CPE_LED_PAR_RATE 14
#define I2CPE_REPORT_DISTANCE 0
#define I2CPE_REPORT_STRENGTH 1
#define I2CPE_REPORT_VERSION 2
// Default I2C addresses
#define I2CPE_PRESET_ADDR_X 30
#define I2CPE_PRESET_ADDR_Y 31
#define I2CPE_PRESET_ADDR_Z 32
#define I2CPE_PRESET_ADDR_E 33
#define I2CPE_DEF_AXIS X_AXIS
#define I2CPE_DEF_ADDR I2CPE_PRESET_ADDR_X
// Error event counter; tracks how many times there is an error exceeding a certain threshold
#define I2CPE_ERR_CNT_THRESH 3.00
#define I2CPE_ERR_CNT_DEBOUNCE_MS 2000
#if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
#define I2CPE_ERR_ARRAY_SIZE 32
#define I2CPE_ERR_PRST_ARRAY_SIZE 10
#endif
// Error Correction Methods
#define I2CPE_ECM_NONE 0
#define I2CPE_ECM_MICROSTEP 1
#define I2CPE_ECM_PLANNER 2
#define I2CPE_ECM_STALLDETECT 3
// Encoder types
#define I2CPE_ENC_TYPE_ROTARY 0
#define I2CPE_ENC_TYPE_LINEAR 1
// Parser
#define I2CPE_PARSE_ERR 1
#define I2CPE_PARSE_OK 0
#define LOOP_PE(VAR) LOOP_L_N(VAR, I2CPE_ENCODER_CNT)
#define CHECK_IDX() do{ if (!WITHIN(idx, 0, I2CPE_ENCODER_CNT - 1)) return; }while(0)
typedef union {
volatile int32_t val = 0;
uint8_t bval[4];
} i2cLong;
class I2CPositionEncoder {
private:
AxisEnum encoderAxis = I2CPE_DEF_AXIS;
uint8_t i2cAddress = I2CPE_DEF_ADDR,
ecMethod = I2CPE_DEF_EC_METHOD,
type = I2CPE_DEF_TYPE,
H = I2CPE_MAG_SIG_NF; // Magnetic field strength
int encoderTicksPerUnit = I2CPE_DEF_ENC_TICKS_UNIT,
stepperTicks = I2CPE_DEF_TICKS_REV,
errorCount = 0,
errorPrev = 0;
float ecThreshold = I2CPE_DEF_EC_THRESH;
bool homed = false,
trusted = false,
initialised = false,
active = false,
invert = false,
ec = true;
int32_t zeroOffset = 0,
lastPosition = 0,
position;
millis_t lastPositionTime = 0,
nextErrorCountTime = 0,
lastErrorTime;
#if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
uint8_t errIdx = 0, errPrstIdx = 0;
int err[I2CPE_ERR_ARRAY_SIZE] = { 0 },
errPrst[I2CPE_ERR_PRST_ARRAY_SIZE] = { 0 };
#endif
public:
void init(const uint8_t address, const AxisEnum axis);
void reset();
void update();
void set_homed();
int32_t get_raw_count();
FORCE_INLINE float mm_from_count(const int32_t count) {
switch (type) {
default: return -1;
case I2CPE_ENC_TYPE_LINEAR:
return count / encoderTicksPerUnit;
case I2CPE_ENC_TYPE_ROTARY:
return (count * stepperTicks) / (encoderTicksPerUnit * planner.axis_steps_per_mm[encoderAxis]);
}
}
FORCE_INLINE float get_position_mm() { return mm_from_count(get_position()); }
FORCE_INLINE int32_t get_position() { return get_raw_count() - zeroOffset; }
int32_t get_axis_error_steps(const bool report);
float get_axis_error_mm(const bool report);
void calibrate_steps_mm(const uint8_t iter);
bool passes_test(const bool report);
bool test_axis(void);
FORCE_INLINE int get_error_count(void) { return errorCount; }
FORCE_INLINE void set_error_count(const int newCount) { errorCount = newCount; }
FORCE_INLINE uint8_t get_address() { return i2cAddress; }
FORCE_INLINE void set_address(const uint8_t addr) { i2cAddress = addr; }
FORCE_INLINE bool get_active(void) { return active; }
FORCE_INLINE void set_active(const bool a) { active = a; }
FORCE_INLINE void set_inverted(const bool i) { invert = i; }
FORCE_INLINE AxisEnum get_axis() { return encoderAxis; }
FORCE_INLINE bool get_ec_enabled() { return ec; }
FORCE_INLINE void set_ec_enabled(const bool enabled) { ec = enabled; }
FORCE_INLINE uint8_t get_ec_method() { return ecMethod; }
FORCE_INLINE void set_ec_method(const byte method) { ecMethod = method; }
FORCE_INLINE float get_ec_threshold() { return ecThreshold; }
FORCE_INLINE void set_ec_threshold(const float newThreshold) { ecThreshold = newThreshold; }
FORCE_INLINE int get_encoder_ticks_mm() {
switch (type) {
default: return 0;
case I2CPE_ENC_TYPE_LINEAR:
return encoderTicksPerUnit;
case I2CPE_ENC_TYPE_ROTARY:
return (int)((encoderTicksPerUnit / stepperTicks) * planner.axis_steps_per_mm[encoderAxis]);
}
}
FORCE_INLINE int get_ticks_unit() { return encoderTicksPerUnit; }
FORCE_INLINE void set_ticks_unit(const int ticks) { encoderTicksPerUnit = ticks; }
FORCE_INLINE uint8_t get_type() { return type; }
FORCE_INLINE void set_type(const byte newType) { type = newType; }
FORCE_INLINE int get_stepper_ticks() { return stepperTicks; }
FORCE_INLINE void set_stepper_ticks(const int ticks) { stepperTicks = ticks; }
};
class I2CPositionEncodersMgr {
private:
static bool I2CPE_anyaxis;
static uint8_t I2CPE_addr, I2CPE_idx;
public:
static void init(void);
// consider only updating one endoder per call / tick if encoders become too time intensive
static void update(void) { LOOP_PE(i) encoders[i].update(); }
static void homed(const AxisEnum axis) {
LOOP_PE(i)
if (encoders[i].get_axis() == axis) encoders[i].set_homed();
}
static void report_position(const int8_t idx, const bool units, const bool noOffset);
static void report_status(const int8_t idx) {
CHECK_IDX();
SERIAL_ECHOPAIR("Encoder ",idx);
SERIAL_ECHOPGM(": ");
encoders[idx].get_raw_count();
encoders[idx].passes_test(true);
}
static void report_error(const int8_t idx) {
CHECK_IDX();
encoders[idx].get_axis_error_steps(true);
}
static void test_axis(const int8_t idx) {
CHECK_IDX();
encoders[idx].test_axis();
}
static void calibrate_steps_mm(const int8_t idx, const int iterations) {
CHECK_IDX();
encoders[idx].calibrate_steps_mm(iterations);
}
static void change_module_address(const uint8_t oldaddr, const uint8_t newaddr);
static void report_module_firmware(const uint8_t address);
static void report_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
SERIAL_ECHOLNPAIR(" axis is ", encoders[idx].get_error_count());
}
static void reset_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_error_count(0);
SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
SERIAL_ECHOLNPGM(" axis has been reset.");
}
static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_enabled(enabled);
SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis]);
SERIAL_ECHOPGM(" axis is ");
serialprintPGM(encoders[idx].get_ec_enabled() ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPGM("abled.");
}
static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_threshold(newThreshold);
SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
SERIAL_ECHOPAIR_F(" axis set to ", newThreshold);
SERIAL_ECHOLNPGM("mm.");
}
static void get_ec_threshold(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
const float threshold = encoders[idx].get_ec_threshold();
SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
SERIAL_ECHOPAIR_F(" axis is ", threshold);
SERIAL_ECHOLNPGM("mm.");
}
static int8_t idx_from_axis(const AxisEnum axis) {
LOOP_PE(i)
if (encoders[i].get_axis() == axis) return i;
return -1;
}
static int8_t idx_from_addr(const uint8_t addr) {
LOOP_PE(i)
if (encoders[i].get_address() == addr) return i;
return -1;
}
static int8_t parse();
static void M860();
static void M861();
static void M862();
static void M863();
static void M864();
static void M865();
static void M866();
static void M867();
static void M868();
static void M869();
static I2CPositionEncoder encoders[I2CPE_ENCODER_CNT];
};
extern I2CPositionEncodersMgr I2CPEM;
FORCE_INLINE static void gcode_M860() { I2CPEM.M860(); }
FORCE_INLINE static void gcode_M861() { I2CPEM.M861(); }
FORCE_INLINE static void gcode_M862() { I2CPEM.M862(); }
FORCE_INLINE static void gcode_M863() { I2CPEM.M863(); }
FORCE_INLINE static void gcode_M864() { I2CPEM.M864(); }
FORCE_INLINE static void gcode_M865() { I2CPEM.M865(); }
FORCE_INLINE static void gcode_M866() { I2CPEM.M866(); }
FORCE_INLINE static void gcode_M867() { I2CPEM.M867(); }
FORCE_INLINE static void gcode_M868() { I2CPEM.M868(); }
FORCE_INLINE static void gcode_M869() { I2CPEM.M869(); }
#endif //I2C_POSITION_ENCODERS
#endif //I2CPOSENC_H

332
Marlin/M100_Free_Mem_Chk.cpp Normal file
View file

@ -0,0 +1,332 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* M100 Free Memory Watcher
*
* This code watches the free memory block between the bottom of the heap and the top of the stack.
* This memory block is initialized and watched via the M100 command.
*
* M100 I Initializes the free memory block and prints vitals statistics about the area
*
* M100 F Identifies how much of the free memory block remains free and unused. It also
* detects and reports any corruption within the free memory block that may have
* happened due to errant firmware.
*
* M100 D Does a hex display of the free memory block along with a flag for any errant
* data that does not match the expected value.
*
* M100 C x Corrupts x locations within the free memory block. This is useful to check the
* correctness of the M100 F and M100 D commands.
*
* Also, there are two support functions that can be called from a developer's C code.
*
* uint16_t check_for_free_memory_corruption(const char * const ptr);
* void M100_dump_routine(const char * const title, const char *start, const char *end);
*
* Initial version by Roxy-3D
*/
#include "MarlinConfig.h"
#if ENABLED(M100_FREE_MEMORY_WATCHER)
#define M100_FREE_MEMORY_DUMPER // Enable for the `M100 D` Dump sub-command
#define M100_FREE_MEMORY_CORRUPTOR // Enable for the `M100 C` Corrupt sub-command
#include "Marlin.h"
#include "parser.h"
#include "hex_print_routines.h"
#define TEST_BYTE ((char) 0xE5)
extern char* __brkval;
extern size_t __heap_start, __heap_end, __flp;
extern char __bss_end;
//
// Utility functions
//
#define END_OF_HEAP() (__brkval ? __brkval : &__bss_end)
int check_for_free_memory_corruption(const char * const title);
// Location of a variable on its stack frame. Returns a value above
// the stack (once the function returns to the caller).
char* top_of_stack() {
char x;
return &x + 1; // x is pulled on return;
}
// Count the number of test bytes at the specified location.
int16_t count_test_bytes(const char * const ptr) {
for (uint16_t i = 0; i < 32000; i++)
if (((char) ptr[i]) != TEST_BYTE)
return i - 1;
return -1;
}
//
// M100 sub-commands
//
#if ENABLED(M100_FREE_MEMORY_DUMPER)
/**
* M100 D
* Dump the free memory block from __brkval to the stack pointer.
* malloc() eats memory from the start of the block and the stack grows
* up from the bottom of the block. Solid test bytes indicate nothing has
* used that memory yet. There should not be anything but test bytes within
* the block. If so, it may indicate memory corruption due to a bad pointer.
* Unexpected bytes are flagged in the right column.
*/
void dump_free_memory(const char *ptr, const char *sp) {
//
// Start and end the dump on a nice 16 byte boundary
// (even though the values are not 16-byte aligned).
//
ptr = (char *)((uint16_t)ptr & 0xFFF0); // Align to 16-byte boundary
sp = (char *)((uint16_t)sp | 0x000F); // Align sp to the 15th byte (at or above sp)
// Dump command main loop
while (ptr < sp) {
print_hex_word((uint16_t)ptr); // Print the address
SERIAL_CHAR(':');
for (uint8_t i = 0; i < 16; i++) { // and 16 data bytes
if (i == 8) SERIAL_CHAR('-');
print_hex_byte(ptr[i]);
SERIAL_CHAR(' ');
}
safe_delay(25);
SERIAL_CHAR('|'); // Point out non test bytes
for (uint8_t i = 0; i < 16; i++) {
char ccc = (char)ptr[i]; // cast to char before automatically casting to char on assignment, in case the compiler is broken
if (&ptr[i] >= (const char*)command_queue && &ptr[i] < (const char*)(command_queue + sizeof(command_queue))) { // Print out ASCII in the command buffer area
if (!WITHIN(ccc, ' ', 0x7E)) ccc = ' ';
}
else { // If not in the command buffer area, flag bytes that don't match the test byte
ccc = (ccc == TEST_BYTE) ? ' ' : '?';
}
SERIAL_CHAR(ccc);
}
SERIAL_EOL();
ptr += 16;
safe_delay(25);
idle();
}
}
void M100_dump_routine(const char * const title, const char *start, const char *end) {
SERIAL_ECHOLN(title);
//
// Round the start and end locations to produce full lines of output
//
start = (char*)((uint16_t) start & 0xFFF0);
end = (char*)((uint16_t) end | 0x000F);
dump_free_memory(start, end);
}
#endif // M100_FREE_MEMORY_DUMPER
/**
* M100 F
* Return the number of free bytes in the memory pool,
* with other vital statistics defining the pool.
*/
void free_memory_pool_report(char * const ptr, const int16_t size) {
int16_t max_cnt = -1, block_cnt = 0;
char *max_addr = NULL;
// Find the longest block of test bytes in the buffer
for (int16_t i = 0; i < size; i++) {
char *addr = ptr + i;
if (*addr == TEST_BYTE) {
const int16_t j = count_test_bytes(addr);
if (j > 8) {
SERIAL_ECHOPAIR("Found ", j);
SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(addr));
if (j > max_cnt) {
max_cnt = j;
max_addr = addr;
}
i += j;
block_cnt++;
}
}
}
if (block_cnt > 1) {
SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area.");
SERIAL_ECHOPAIR("\nLargest free block is ", max_cnt);
SERIAL_ECHOLNPAIR(" bytes at ", hex_address(max_addr));
}
SERIAL_ECHOLNPAIR("check_for_free_memory_corruption() = ", check_for_free_memory_corruption("M100 F "));
}
#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
/**
* M100 C<num>
* Corrupt <num> locations in the free memory pool and report the corrupt addresses.
* This is useful to check the correctness of the M100 D and the M100 F commands.
*/
void corrupt_free_memory(char *ptr, const uint16_t size) {
ptr += 8;
const uint16_t near_top = top_of_stack() - ptr - 250, // -250 to avoid interrupt activity that's altered the stack.
j = near_top / (size + 1);
SERIAL_ECHOLNPGM("Corrupting free memory block.\n");
for (uint16_t i = 1; i <= size; i++) {
char * const addr = ptr + i * j;
*addr = i;
SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr));
}
SERIAL_EOL();
}
#endif // M100_FREE_MEMORY_CORRUPTOR
/**
* M100 I
* Init memory for the M100 tests. (Automatically applied on the first M100.)
*/
void init_free_memory(char *ptr, int16_t size) {
SERIAL_ECHOLNPGM("Initializing free memory block.\n\n");
size -= 250; // -250 to avoid interrupt activity that's altered the stack.
if (size < 0) {
SERIAL_ECHOLNPGM("Unable to initialize.\n");
return;
}
ptr += 8; // move a few bytes away from the heap just because we don't want
// to be altering memory that close to it.
memset(ptr, TEST_BYTE, size);
SERIAL_ECHO(size);
SERIAL_ECHOLNPGM(" bytes of memory initialized.\n");
for (int16_t i = 0; i < size; i++) {
if (ptr[i] != TEST_BYTE) {
SERIAL_ECHOPAIR("? address : ", hex_address(ptr + i));
SERIAL_ECHOLNPAIR("=", hex_byte(ptr[i]));
SERIAL_EOL();
}
}
}
/**
* M100: Free Memory Check
*/
void gcode_M100() {
SERIAL_ECHOPAIR("\n__brkval : ", hex_address(__brkval));
SERIAL_ECHOPAIR("\n__bss_end : ", hex_address(&__bss_end));
char *ptr = END_OF_HEAP(), *sp = top_of_stack();
SERIAL_ECHOPAIR("\nstart of free space : ", hex_address(ptr));
SERIAL_ECHOLNPAIR("\nStack Pointer : ", hex_address(sp));
// Always init on the first invocation of M100
static bool m100_not_initialized = true;
if (m100_not_initialized || parser.seen('I')) {
m100_not_initialized = false;
init_free_memory(ptr, sp - ptr);
}
#if ENABLED(M100_FREE_MEMORY_DUMPER)
if (parser.seen('D'))
return dump_free_memory(ptr, sp);
#endif
if (parser.seen('F'))
return free_memory_pool_report(ptr, sp - ptr);
#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
if (parser.seen('C'))
return corrupt_free_memory(ptr, parser.value_int());
#endif
}
int check_for_free_memory_corruption(const char * const title) {
SERIAL_ECHO(title);
char *ptr = END_OF_HEAP(), *sp = top_of_stack();
int n = sp - ptr;
SERIAL_ECHOPAIR("\nfmc() n=", n);
SERIAL_ECHOPAIR("\n&__brkval: ", hex_address(&__brkval));
SERIAL_ECHOPAIR("=", hex_address(__brkval));
SERIAL_ECHOPAIR("\n__bss_end: ", hex_address(&__bss_end));
SERIAL_ECHOPAIR(" sp=", hex_address(sp));
if (sp < ptr) {
SERIAL_ECHOPGM(" sp < Heap ");
// SET_INPUT_PULLUP(63); // if the developer has a switch wired up to their controller board
// safe_delay(5); // this code can be enabled to pause the display as soon as the
// while ( READ(63)) // malfunction is detected. It is currently defaulting to a switch
// idle(); // being on pin-63 which is unassigend and available on most controller
// safe_delay(20); // boards.
// while ( !READ(63))
// idle();
safe_delay(20);
#ifdef M100_FREE_MEMORY_DUMPER
M100_dump_routine(" Memory corruption detected with sp<Heap\n", (char*)0x1B80, (char*)0x21FF);
#endif
}
// Scan through the range looking for the biggest block of 0xE5's we can find
int block_cnt = 0;
for (int i = 0; i < n; i++) {
if (ptr[i] == TEST_BYTE) {
int16_t j = count_test_bytes(ptr + i);
if (j > 8) {
// SERIAL_ECHOPAIR("Found ", j);
// SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(ptr + i));
i += j;
block_cnt++;
SERIAL_ECHOPAIR(" (", block_cnt);
SERIAL_ECHOPAIR(") found=", j);
SERIAL_ECHOPGM(" ");
}
}
}
SERIAL_ECHOPAIR(" block_found=", block_cnt);
if (block_cnt != 1 || __brkval != 0x0000)
SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area.");
if (block_cnt == 0) // Make sure the special case of no free blocks shows up as an
block_cnt = -1; // error to the calling code!
SERIAL_ECHOPGM(" return=");
if (block_cnt == 1) {
SERIAL_CHAR('0'); // if the block_cnt is 1, nothing has broken up the free memory
SERIAL_EOL(); // area and it is appropriate to say 'no corruption'.
return 0;
}
SERIAL_ECHOLNPGM("true");
return block_cnt;
}
#endif // M100_FREE_MEMORY_WATCHER

686
Marlin/Makefile Normal file
View file

@ -0,0 +1,686 @@
# Marlin Firmware Arduino Project Makefile
#
# Makefile Based on:
# Arduino 0011 Makefile
# Arduino adaptation by mellis, eighthave, oli.keller
# Marlin adaption by Daid
#
# This has been tested with Arduino 0022.
#
# This makefile allows you to build sketches from the command line
# without the Arduino environment (or Java).
#
# Detailed instructions for using the makefile:
#
# 1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
# contains the Arduino installation (for example, under Mac OS X, this
# might be /Applications/Arduino.app/Contents/Resources/Java).
#
# 2. Modify the line containing "UPLOAD_PORT" to refer to the filename
# representing the USB or serial connection to your Arduino board
# (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file
# changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
#
# 3. Set the line containing "MCU" to match your board's processor.
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
# or Diecimila have the atmega168. If you're using a LilyPad Arduino,
# change F_CPU to 8000000. If you are using Gen7 electronics, you
# probably need to use 20000000. Either way, you must regenerate
# the speed lookup table with create_speed_lookuptable.py.
#
# 4. Type "make" and press enter to compile/verify your program.
#
# 5. Type "make upload", reset your Arduino board, and press enter to
# upload your program to the Arduino board.
#
# Note that all settings at the top of this file can be overriden from
# the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
#
# To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
#
# make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
#
# To compile and upload simply add "upload" to the end of the line...
#
# make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
#
# If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
# start upload manually (using stk500) like so:
#
# avrdude -C /root/arduino/hardware/tools/avr/etc/avrdude.conf -v -p m2560 -c stk500 \
# -U flash:w:applet/Marlin.hex:i -P /dev/ttyUSB0
#
# Or, try disconnecting USB to power down and then reconnecting before running avrdude.
#
# This defines the board to compile for (see boards.h for your board's ID)
HARDWARE_MOTHERBOARD ?= 11
# Arduino source install directory, and version number
# On most linuxes this will be /usr/share/arduino
ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
ARDUINO_VERSION ?= 106
# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
AVR_TOOLS_PATH ?=
#Programmer configuration
UPLOAD_RATE ?= 57600
AVRDUDE_PROGRAMMER ?= arduino
# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
UPLOAD_PORT ?= /dev/ttyUSB0
#Directory used to build files in, contains all the build files, from object files to the final hex file
#on linux it is best to put an absolute path like /home/username/tmp .
BUILD_DIR ?= applet
# This defines whether Liquid_TWI2 support will be built
LIQUID_TWI2 ?= 0
# this defines if Wire is needed
WIRE ?= 0
# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
U8GLIB ?= 1
# this defines whether to add a workaround for the avr-gcc relocation bug
# https://www.stix.id.au/wiki/AVR_relocation_truncations_workaround
RELOC_WORKAROUND ?= 1
############################################################################
# Below here nothing should be changed...
# Here the Arduino variant is selected by the board type
# HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
# MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
ifeq ($(HARDWARE_MOTHERBOARD),0)
# No motherboard selected
#
# RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
#
# MEGA/RAMPS up to 1.2
else ifeq ($(HARDWARE_MOTHERBOARD),3)
# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
else ifeq ($(HARDWARE_MOTHERBOARD),33)
# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
else ifeq ($(HARDWARE_MOTHERBOARD),34)
# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
else ifeq ($(HARDWARE_MOTHERBOARD),35)
# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
else ifeq ($(HARDWARE_MOTHERBOARD),36)
# RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
else ifeq ($(HARDWARE_MOTHERBOARD),38)
# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
else ifeq ($(HARDWARE_MOTHERBOARD),43)
# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
else ifeq ($(HARDWARE_MOTHERBOARD),44)
# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
else ifeq ($(HARDWARE_MOTHERBOARD),45)
# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
else ifeq ($(HARDWARE_MOTHERBOARD),46)
# RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
else ifeq ($(HARDWARE_MOTHERBOARD),48)
# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
else ifeq ($(HARDWARE_MOTHERBOARD),143)
# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
else ifeq ($(HARDWARE_MOTHERBOARD),144)
# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
else ifeq ($(HARDWARE_MOTHERBOARD),145)
# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
else ifeq ($(HARDWARE_MOTHERBOARD),146)
# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
else ifeq ($(HARDWARE_MOTHERBOARD),148)
#
# RAMPS Derivatives - ATmega1280, ATmega2560
#
# 3Drag Controller
else ifeq ($(HARDWARE_MOTHERBOARD),77)
# Velleman K8200 Controller (derived from 3Drag Controller)
else ifeq ($(HARDWARE_MOTHERBOARD),78)
# Velleman K8400 Controller (derived from 3Drag Controller)
else ifeq ($(HARDWARE_MOTHERBOARD),79)
# 2PrintBeta BAM&DICE with STK drivers
else ifeq ($(HARDWARE_MOTHERBOARD),401)
# 2PrintBeta BAM&DICE Due with STK drivers
else ifeq ($(HARDWARE_MOTHERBOARD),402)
# MKS BASE v1.0
else ifeq ($(HARDWARE_MOTHERBOARD),40)
# MKS v1.5 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),405)
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),41)
# MKS GEN v1.3 or 1.4
else ifeq ($(HARDWARE_MOTHERBOARD),47)
# MKS GEN L
else ifeq ($(HARDWARE_MOTHERBOARD),53)
# zrib V2.0 control board (Chinese knock off RAMPS replica)
else ifeq ($(HARDWARE_MOTHERBOARD),504)
# Felix 2.0+ Electronics Board (RAMPS like)
else ifeq ($(HARDWARE_MOTHERBOARD),37)
# Invent-A-Part RigidBoard
else ifeq ($(HARDWARE_MOTHERBOARD),42)
# Invent-A-Part RigidBoard V2
else ifeq ($(HARDWARE_MOTHERBOARD),52)
# Sainsmart 2-in-1 board
else ifeq ($(HARDWARE_MOTHERBOARD),49)
# Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
else ifeq ($(HARDWARE_MOTHERBOARD),71)
MCU ?= atmega1280
# Azteeg X3
else ifeq ($(HARDWARE_MOTHERBOARD),67)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),68)
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
else ifeq ($(HARDWARE_MOTHERBOARD),72)
# Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),80)
# bq ZUM Mega 3D
else ifeq ($(HARDWARE_MOTHERBOARD),503)
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
else ifeq ($(HARDWARE_MOTHERBOARD),431)
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),343)
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),443)
# Creality: Ender-4, CR-8
else ifeq ($(HARDWARE_MOTHERBOARD),243)
#
# Other ATmega1280, ATmega2560
#
# Cartesio CN Controls V11
else ifeq ($(HARDWARE_MOTHERBOARD),111)
# Cartesio CN Controls V12
else ifeq ($(HARDWARE_MOTHERBOARD),112)
# Cheaptronic v1.0
else ifeq ($(HARDWARE_MOTHERBOARD),2)
# Cheaptronic v2.0
else ifeq ($(HARDWARE_MOTHERBOARD),21)
# Makerbot Mightyboard Revision E
else ifeq ($(HARDWARE_MOTHERBOARD),200)
# Megatronics
else ifeq ($(HARDWARE_MOTHERBOARD),70)
# Megatronics v2.0
else ifeq ($(HARDWARE_MOTHERBOARD),701)
# Megatronics v3.0
else ifeq ($(HARDWARE_MOTHERBOARD),703)
# Megatronics v3.1
else ifeq ($(HARDWARE_MOTHERBOARD),704)
# Rambo
else ifeq ($(HARDWARE_MOTHERBOARD),301)
# Mini-Rambo
else ifeq ($(HARDWARE_MOTHERBOARD),302)
# Mini-Rambo 1.0a
else ifeq ($(HARDWARE_MOTHERBOARD),303)
# Einsy Rambo
else ifeq ($(HARDWARE_MOTHERBOARD),304)
# Einsy Retro
else ifeq ($(HARDWARE_MOTHERBOARD),305)
# Elefu Ra Board (v3)
else ifeq ($(HARDWARE_MOTHERBOARD),21)
# Leapfrog
else ifeq ($(HARDWARE_MOTHERBOARD),999)
# Mega controller
else ifeq ($(HARDWARE_MOTHERBOARD),310)
# abee Scoovo X9H
else ifeq ($(HARDWARE_MOTHERBOARD),321)
# Geeetech GT2560 Rev. A
else ifeq ($(HARDWARE_MOTHERBOARD),74)
# Geeetech GT2560 Rev. A+ (with auto level probe)
else ifeq ($(HARDWARE_MOTHERBOARD),75)
#
# ATmega1281, ATmega2561
#
else ifeq ($(HARDWARE_MOTHERBOARD),702)
MCU ?= atmega1281
else ifeq ($(HARDWARE_MOTHERBOARD),25)
MCU ?= atmega1281
#
# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
#
# Sanguinololu < 1.2
else ifeq ($(HARDWARE_MOTHERBOARD),6)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
# Sanguinololu 1.2 and above
else ifeq ($(HARDWARE_MOTHERBOARD),62)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
# Melzi
else ifeq ($(HARDWARE_MOTHERBOARD),63)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
# Melzi with ATmega1284 (MaKr3d version)
else ifeq ($(HARDWARE_MOTHERBOARD),66)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
# Melzi Creality3D board (for CR-10 etc)
else ifeq ($(HARDWARE_MOTHERBOARD),89)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
# Melzi Malyan M150 board
else ifeq ($(HARDWARE_MOTHERBOARD),92)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
# Tronxy X5S
else ifeq ($(HARDWARE_MOTHERBOARD),505)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
# STB V1.1
else ifeq ($(HARDWARE_MOTHERBOARD),64)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
# Azteeg X1
else ifeq ($(HARDWARE_MOTHERBOARD),65)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
# Anet 1.0 (Melzi clone)
else ifeq ($(HARDWARE_MOTHERBOARD),69)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#
# Other ATmega644P, ATmega644, ATmega1284P
#
# Gen3 Monolithic Electronics
else ifeq ($(HARDWARE_MOTHERBOARD),22)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
# Gen3+
else ifeq ($(HARDWARE_MOTHERBOARD),9)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
# Gen6
else ifeq ($(HARDWARE_MOTHERBOARD),5)
HARDWARE_VARIANT ?= Gen6
MCU ?= atmega644p
# Gen6 deluxe
else ifeq ($(HARDWARE_MOTHERBOARD),51)
HARDWARE_VARIANT ?= Gen6
MCU ?= atmega644p
# Gen7 custom (Alfons3 Version)
else ifeq ($(HARDWARE_MOTHERBOARD),10)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega644
F_CPU ?= 20000000
# Gen7 v1.1, v1.2
else ifeq ($(HARDWARE_MOTHERBOARD),11)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega644p
F_CPU ?= 20000000
# Gen7 v1.3
else ifeq ($(HARDWARE_MOTHERBOARD),12)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega644p
F_CPU ?= 20000000
# Gen7 v1.4
else ifeq ($(HARDWARE_MOTHERBOARD),13)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega1284p
F_CPU ?= 20000000
# Alpha OMCA board
else ifeq ($(HARDWARE_MOTHERBOARD),90)
HARDWARE_VARIANT ?= SanguinoA
MCU ?= atmega644
# Final OMCA board
else ifeq ($(HARDWARE_MOTHERBOARD),91)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
# Sethi 3D_1
else ifeq ($(HARDWARE_MOTHERBOARD),20)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
#
# Teensyduino - AT90USB1286, AT90USB1286P
#
# Teensylu
else ifeq ($(HARDWARE_MOTHERBOARD),8)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
# Printrboard (AT90USB1286)
else ifeq ($(HARDWARE_MOTHERBOARD),81)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
# Printrboard Revision F (AT90USB1286)
else ifeq ($(HARDWARE_MOTHERBOARD),811)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
# Brainwave (AT90USB646)
else ifeq ($(HARDWARE_MOTHERBOARD),82)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb646
# Brainwave Pro (AT90USB1286)
else ifeq ($(HARDWARE_MOTHERBOARD),83)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
# SAV Mk-I (AT90USB1286)
else ifeq ($(HARDWARE_MOTHERBOARD),84)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
# Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84 make
else ifeq ($(HARDWARE_MOTHERBOARD),85)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
# 5DPrint D8 Driver Board
else ifeq ($(HARDWARE_MOTHERBOARD),88)
HARDWARE_VARIANT ?= Teensy
MCU ?= at90usb1286
endif
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
# if you are setting this to something other than 16MHz
# Set to 16Mhz if not yet set.
F_CPU ?= 16000000
# Set to arduino, ATmega2560 if not yet set.
HARDWARE_VARIANT ?= arduino
MCU ?= atmega2560
# Arduino contained the main source code for the Arduino
# Libraries, the "hardware variant" are for boards
# that derives from that, and their source are present in
# the main Marlin source directory
TARGET = $(notdir $(CURDIR))
# VPATH tells make to look into these directory for source files,
# there is no need to specify explicit pathnames as long as the
# directory is added here
VPATH = .
VPATH += $(BUILD_DIR)
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
ifeq ($(LIQUID_TWI2), 1)
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
endif
ifeq ($(WIRE), 1)
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
endif
ifeq ($(NEOPIXEL), 1)
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
endif
ifeq ($(U8GLIB), 1)
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/utility
endif
ifeq ($(HARDWARE_VARIANT), arduino)
HARDWARE_SUB_VARIANT ?= mega
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
else
ifeq ($(HARDWARE_VARIANT), Sanguino)
VPATH += $(HARDWARE_DIR)/marlin/avr/variants/sanguino
else
HARDWARE_SUB_VARIANT ?= standard
VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
endif
endif
SRC = wiring.c \
wiring_analog.c wiring_digital.c \
wiring_pulse.c \
wiring_shift.c WInterrupts.c hooks.c
ifeq ($(HARDWARE_VARIANT), Teensy)
SRC = wiring.c
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
endif
CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp Tone.cpp
CXXSRC += $(wildcard *.cpp)
ifeq ($(NEOPIXEL), 1)
CXXSRC += Adafruit_NeoPixel.cpp
endif
ifeq ($(LIQUID_TWI2), 0)
CXXSRC += LiquidCrystal.cpp
else
SRC += twi.c
CXXSRC += Wire.cpp LiquidTWI2.cpp
endif
ifeq ($(WIRE), 1)
SRC += twi.c
CXXSRC += Wire.cpp
endif
ifeq ($(U8GLIB), 1)
SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c
endif
ifeq ($(RELOC_WORKAROUND), 1)
LD_PREFIX=-nodefaultlibs
LD_SUFFIX=-lm -lgcc -lc -lgcc -L$(ARDUINO_INSTALL_DIR)/hardware/tools/avr/avr/lib/avr6 -l$(MCU)
endif
#Check for Arduino 1.0.0 or higher and use the correct source files for that version
ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
CXXSRC += main.cpp
else
SRC += pins_arduino.c main.c
endif
FORMAT = ihex
# Name of this Makefile (used for "make depend").
MAKEFILE = Makefile
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
DEBUG = stabs
OPT = s
DEFINES ?=
# Program settings
CC = $(AVR_TOOLS_PATH)avr-gcc
CXX = $(AVR_TOOLS_PATH)avr-g++
OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
AR = $(AVR_TOOLS_PATH)avr-ar
SIZE = $(AVR_TOOLS_PATH)avr-size
NM = $(AVR_TOOLS_PATH)avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
MV = mv -f
# Place -D or -U options here
CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)}
CXXDEFS = $(CDEFS)
ifeq ($(HARDWARE_VARIANT), Teensy)
CDEFS += -DUSB_SERIAL
SRC += usb.c pins_teensy.c
CXXSRC += usb_api.cpp
endif
# Add all the source directories as include directories too
CINCS = ${addprefix -I ,${VPATH}}
CXXINCS = ${addprefix -I ,${VPATH}}
# Compiler flag to set the C/CPP Standard level.
CSTANDARD = -std=gnu99
CXXSTANDARD = -std=gnu++11
CDEBUG = -g$(DEBUG)
CWARN = -Wall -Wstrict-prototypes
CTUNING = -w -fsigned-char -funsigned-bitfields -fpack-struct \
-fshort-enums -ffunction-sections -fdata-sections -flto \
-DARDUINO=$(ARDUINO_VERSION)
ifneq ($(HARDWARE_MOTHERBOARD),)
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
endif
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
CEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics
CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) $(CSTANDARD)
CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) $(CXXSTANDARD)
#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
LDFLAGS = -lm
# Programming support using avrdude. Settings and variables.
AVRDUDE_PORT = $(UPLOAD_PORT)
AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
ifeq ($(shell uname -s), Linux)
AVRDUDE_CONF = /etc/avrdude/avrdude.conf
else
AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
endif
AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
-b$(UPLOAD_RATE)
# Define all object files.
OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}}
# Define all listing files.
LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS)
# set V=1 (eg, "make V=1") to print the full commands etc.
ifneq ($V,1)
Pecho=@echo
P=@
else
Pecho=@:
P=
endif
# Default target.
all: sizeafter
build: $(BUILD_DIR) elf hex
# Creates the object directory
$(BUILD_DIR):
$P mkdir -p $(BUILD_DIR)
elf: $(BUILD_DIR)/$(TARGET).elf
hex: $(BUILD_DIR)/$(TARGET).hex
eep: $(BUILD_DIR)/$(TARGET).eep
lss: $(BUILD_DIR)/$(TARGET).lss
sym: $(BUILD_DIR)/$(TARGET).sym
# Program the device.
# Do not try to reset an Arduino if it's not one
upload: $(BUILD_DIR)/$(TARGET).hex
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
stty hup < $(UPLOAD_PORT); true
endif
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
stty -hup < $(UPLOAD_PORT); true
endif
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \
$(SIZE) $(BUILD_DIR)/$(TARGET).elf
sizebefore:
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
sizeafter: build
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000
coff: $(BUILD_DIR)/$(TARGET).elf
$(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
extcoff: $(TARGET).elf
$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
.SUFFIXES: .elf .hex .eep .lss .sym
.PRECIOUS: .o
.elf.hex:
$(Pecho) " COPY $@"
$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
.elf.eep:
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
# Create extended listing file from ELF output file.
.elf.lss:
$(OBJDUMP) -h -S $< > $@
# Create a symbol table from ELF output file.
.elf.sym:
$(NM) -n $< > $@
# Link: create ELF output file from library.
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
$(Pecho) " CXX $@"
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -Wl,--gc-sections,--relax -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
$(Pecho) " CC $<"
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
$(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
$(Pecho) " CXX $<"
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
$(Pecho) " CXX $<"
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
# Target: clean project.
clean:
$(Pecho) " RM $(BUILD_DIR)/*"
$P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \
$(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \
$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
$(Pecho) " RMDIR $(BUILD_DIR)/"
$P rm -rf $(BUILD_DIR)
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
# Automaticaly include the dependency files created by gcc
-include ${wildcard $(BUILD_DIR)/*.d}

647
Marlin/Marlin.h Normal file
View file

@ -0,0 +1,647 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef MARLIN_H
#define MARLIN_H
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include <avr/interrupt.h>
#include "MarlinConfig.h"
#ifdef DEBUG_GCODE_PARSER
#include "parser.h"
#endif
#include "enum.h"
#include "types.h"
#include "fastio.h"
#include "utility.h"
#include "serial.h"
void idle(
#if ENABLED(ADVANCED_PAUSE_FEATURE)
bool no_stepper_sleep = false // pass true to keep steppers from disabling on timeout
#endif
);
void manage_inactivity(const bool ignore_stepper_queue=false);
extern const char axis_codes[XYZE];
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
extern bool extruder_duplication_enabled;
#endif
#if HAS_X2_ENABLE
#define enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0)
#define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0)
#elif HAS_X_ENABLE
#define enable_X() X_ENABLE_WRITE( X_ENABLE_ON)
#define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0)
#else
#define enable_X() NOOP
#define disable_X() NOOP
#endif
#if HAS_Y2_ENABLE
#define enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0)
#define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0)
#elif HAS_Y_ENABLE
#define enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
#define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0)
#else
#define enable_Y() NOOP
#define disable_Y() NOOP
#endif
#if HAS_Z2_ENABLE
#define enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
#elif HAS_Z_ENABLE
#define enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
#else
#define enable_Z() NOOP
#define disable_Z() NOOP
#endif
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
*/
#if MIXING_STEPPERS > 4
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); E4_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); E4_ENABLE_WRITE(!E_ENABLE_ON); }
#elif MIXING_STEPPERS > 3
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); }
#elif MIXING_STEPPERS > 2
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); }
#else
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); }
#endif
#define enable_E1() NOOP
#define disable_E1() NOOP
#define enable_E2() NOOP
#define disable_E2() NOOP
#define enable_E3() NOOP
#define disable_E3() NOOP
#define enable_E4() NOOP
#define disable_E4() NOOP
#else // !MIXING_EXTRUDER
#if HAS_E0_ENABLE
#define enable_E0() E0_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E0() E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E0() NOOP
#define disable_E0() NOOP
#endif
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define enable_E1() E1_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E1() E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E1() NOOP
#define disable_E1() NOOP
#endif
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define enable_E2() E2_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E2() E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E2() NOOP
#define disable_E2() NOOP
#endif
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define enable_E3() E3_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E3() E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E3() NOOP
#define disable_E3() NOOP
#endif
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define enable_E4() E4_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E4() E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E4() NOOP
#define disable_E4() NOOP
#endif
#endif // !MIXING_EXTRUDER
#if ENABLED(HANGPRINTER)
#define enable_A() enable_X()
#define enable_B() enable_Y()
#define enable_C() enable_Z()
#define __D_ENABLE(p) E##p##_ENABLE_WRITE(E_ENABLE_ON)
#define _D_ENABLE(p) __D_ENABLE(p)
#define enable_D() _D_ENABLE(EXTRUDERS)
// Don't allow any axes to be disabled
#undef disable_X
#undef disable_Y
#undef disable_Z
#define disable_X() NOOP
#define disable_Y() NOOP
#define disable_Z() NOOP
#if EXTRUDERS >= 1
#undef disable_E1
#define disable_E1() NOOP
#if EXTRUDERS >= 2
#undef disable_E2
#define disable_E2() NOOP
#if EXTRUDERS >= 3
#undef disable_E3
#define disable_E3() NOOP
#if EXTRUDERS >= 4
#undef disable_E4
#define disable_E4() NOOP
#endif // EXTRUDERS >= 4
#endif // EXTRUDERS >= 3
#endif // EXTRUDERS >= 2
#endif // EXTRUDERS >= 1
#endif // HANGPRINTER
#if ENABLED(G38_PROBE_TARGET)
extern bool G38_move, // flag to tell the interrupt handler that a G38 command is being run
G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active
#endif
void enable_all_steppers();
void disable_e_stepper(const uint8_t e);
void disable_e_steppers();
void disable_all_steppers();
void sync_plan_position();
void sync_plan_position_e();
#if IS_KINEMATIC
void sync_plan_position_kinematic();
#define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position_kinematic()
#else
#define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position()
#endif
void flush_and_request_resend();
void ok_to_send();
void kill(const char*);
void quickstop_stepper();
extern uint8_t marlin_debug_flags;
#define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F))
extern bool Running;
inline bool IsRunning() { return Running; }
inline bool IsStopped() { return !Running; }
bool enqueue_and_echo_command(const char* cmd); // Add a single command to the end of the buffer. Return false on failure.
void enqueue_and_echo_commands_P(const char * const cmd); // Set one or more commands to be prioritized over the next Serial/SD command.
void clear_command_queue();
#if ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(POWER_LOSS_RECOVERY)
extern char command_queue[BUFSIZE][MAX_CMD_SIZE];
#endif
#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (ENABLED(ULTIPANEL) && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE))))
#define HAS_QUEUE_NOW (ENABLED(SDSUPPORT) || HAS_LCD_QUEUE_NOW)
#if HAS_QUEUE_NOW
// Return only when commands are actually enqueued
void enqueue_and_echo_command_now(const char* cmd);
#if HAS_LCD_QUEUE_NOW
void enqueue_and_echo_commands_now_P(const char * const cmd);
#endif
#endif
extern millis_t previous_move_ms;
inline void reset_stepper_timeout() { previous_move_ms = millis(); }
/**
* Feedrate scaling and conversion
*/
extern float feedrate_mm_s;
extern int16_t feedrate_percentage;
#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01f)
extern bool axis_relative_modes[XYZE];
extern uint8_t axis_homed, axis_known_position;
constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS);
FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; }
FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; }
extern volatile bool wait_for_heatup;
#if HAS_RESUME_CONTINUE
extern volatile bool wait_for_user;
#endif
#if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE)
extern bool suspend_auto_report;
#endif
extern float current_position[XYZE], destination[XYZE];
/**
* Workspace offsets
*/
#if HAS_WORKSPACE_OFFSET
#if HAS_HOME_OFFSET
extern float home_offset[XYZ];
#endif
#if HAS_POSITION_SHIFT
extern float position_shift[XYZ];
#endif
#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
extern float workspace_offset[XYZ];
#define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
#elif HAS_HOME_OFFSET
#define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
#elif HAS_POSITION_SHIFT
#define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
#endif
#define NATIVE_TO_LOGICAL(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
#define LOGICAL_TO_NATIVE(POS, AXIS) ((POS) - WORKSPACE_OFFSET(AXIS))
#else
#define NATIVE_TO_LOGICAL(POS, AXIS) (POS)
#define LOGICAL_TO_NATIVE(POS, AXIS) (POS)
#endif
#define LOGICAL_X_POSITION(POS) NATIVE_TO_LOGICAL(POS, X_AXIS)
#define LOGICAL_Y_POSITION(POS) NATIVE_TO_LOGICAL(POS, Y_AXIS)
#define LOGICAL_Z_POSITION(POS) NATIVE_TO_LOGICAL(POS, Z_AXIS)
#define RAW_X_POSITION(POS) LOGICAL_TO_NATIVE(POS, X_AXIS)
#define RAW_Y_POSITION(POS) LOGICAL_TO_NATIVE(POS, Y_AXIS)
#define RAW_Z_POSITION(POS) LOGICAL_TO_NATIVE(POS, Z_AXIS)
// Hotend Offsets
#if HOTENDS > 1
extern float hotend_offset[XYZ][HOTENDS];
#endif
// Software Endstops
extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
#if HAS_SOFTWARE_ENDSTOPS
extern bool soft_endstops_enabled;
void clamp_to_software_endstops(float target[XYZ]);
#else
#define soft_endstops_enabled false
#define clamp_to_software_endstops(x) NOOP
#endif
#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
void update_software_endstops(const AxisEnum axis);
#endif
#define MAX_COORDINATE_SYSTEMS 9
#if ENABLED(CNC_COORDINATE_SYSTEMS)
extern float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ];
bool select_coordinate_system(const int8_t _new);
#endif
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false);
void home_all_axes();
void report_current_position();
#if IS_KINEMATIC
#if ENABLED(HANGPRINTER)
extern float line_lengths[ABCD];
#else
extern float delta[ABC];
#endif
void inverse_kinematics(const float raw[XYZ]);
#endif
#if ENABLED(DELTA)
extern float delta_height,
delta_endstop_adj[ABC],
delta_radius,
delta_tower_angle_trim[ABC],
delta_tower[ABC][2],
delta_diagonal_rod,
delta_calibration_radius,
delta_diagonal_rod_2_tower[ABC],
delta_segments_per_second,
delta_clip_start_height;
void recalc_delta_settings();
float delta_safe_distance_from_top();
// Macro to obtain the Z position of an individual tower
#define DELTA_Z(V,T) V[Z_AXIS] + SQRT( \
delta_diagonal_rod_2_tower[T] - HYPOT2( \
delta_tower[T][X_AXIS] - V[X_AXIS], \
delta_tower[T][Y_AXIS] - V[Y_AXIS] \
) \
)
#define DELTA_IK(V) do { \
delta[A_AXIS] = DELTA_Z(V, A_AXIS); \
delta[B_AXIS] = DELTA_Z(V, B_AXIS); \
delta[C_AXIS] = DELTA_Z(V, C_AXIS); \
}while(0)
#elif ENABLED(HANGPRINTER)
// Don't collect anchor positions in array because there are no A_x, D_x or D_y
extern float anchor_A_y,
anchor_A_z,
anchor_B_x,
anchor_B_y,
anchor_B_z,
anchor_C_x,
anchor_C_y,
anchor_C_z,
anchor_D_z,
delta_segments_per_second,
line_lengths_origin[ABCD];
void recalc_hangprinter_settings();
#define HANGPRINTER_IK(V) do { \
line_lengths[A_AXIS] = SQRT(sq(anchor_A_z - V[Z_AXIS]) \
+ sq(anchor_A_y - V[Y_AXIS]) \
+ sq( V[X_AXIS])); \
line_lengths[B_AXIS] = SQRT(sq(anchor_B_z - V[Z_AXIS]) \
+ sq(anchor_B_y - V[Y_AXIS]) \
+ sq(anchor_B_x - V[X_AXIS])); \
line_lengths[C_AXIS] = SQRT(sq(anchor_C_z - V[Z_AXIS]) \
+ sq(anchor_C_y - V[Y_AXIS]) \
+ sq(anchor_C_x - V[X_AXIS])); \
line_lengths[D_AXIS] = SQRT(sq( V[X_AXIS]) \
+ sq( V[Y_AXIS]) \
+ sq(anchor_D_z - V[Z_AXIS])); \
}while(0)
// Inverse kinematics at origin
#define HANGPRINTER_IK_ORIGIN(LL) do { \
LL[A_AXIS] = SQRT(sq(anchor_A_z) \
+ sq(anchor_A_y)); \
LL[B_AXIS] = SQRT(sq(anchor_B_z) \
+ sq(anchor_B_y) \
+ sq(anchor_B_x)); \
LL[C_AXIS] = SQRT(sq(anchor_C_z) \
+ sq(anchor_C_y) \
+ sq(anchor_C_x)); \
LL[D_AXIS] = anchor_D_z; \
}while(0)
#elif IS_SCARA
void forward_kinematics_SCARA(const float &a, const float &b);
#endif
#if ENABLED(G26_MESH_VALIDATION)
extern bool g26_debug_flag;
#elif ENABLED(AUTO_BED_LEVELING_UBL)
constexpr bool g26_debug_flag = false;
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
#define _GET_MESH_X(I) (bilinear_start[X_AXIS] + (I) * bilinear_grid_spacing[X_AXIS])
#define _GET_MESH_Y(J) (bilinear_start[Y_AXIS] + (J) * bilinear_grid_spacing[Y_AXIS])
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#define _GET_MESH_X(I) ubl.mesh_index_to_xpos(I)
#define _GET_MESH_Y(J) ubl.mesh_index_to_ypos(J)
#elif ENABLED(MESH_BED_LEVELING)
#define _GET_MESH_X(I) mbl.index_to_xpos[I]
#define _GET_MESH_Y(J) mbl.index_to_ypos[J]
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
extern int bilinear_grid_spacing[2], bilinear_start[2];
extern float bilinear_grid_factor[2],
z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
float bilinear_z_offset(const float raw[XYZ]);
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
typedef float (*element_2d_fn)(const uint8_t, const uint8_t);
void print_2d_array(const uint8_t sx, const uint8_t sy, const uint8_t precision, const element_2d_fn fn);
#endif
#if HAS_LEVELING
bool leveling_is_valid();
void set_bed_leveling_enabled(const bool enable=true);
void reset_bed_level();
#endif
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
void set_z_fade_height(const float zfh, const bool do_report=true);
#endif
#if HAS_BED_PROBE
extern float zprobe_zoffset;
bool set_probe_deployed(const bool deploy);
#ifdef Z_AFTER_PROBING
void move_z_after_probing();
#endif
enum ProbePtRaise : unsigned char {
PROBE_PT_NONE, // No raise or stow after run_z_probe
PROBE_PT_STOW, // Do a complete stow after run_z_probe
PROBE_PT_RAISE, // Raise to "between" clearance after run_z_probe
PROBE_PT_BIG_RAISE // Raise to big clearance after run_z_probe
};
float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true);
#define DEPLOY_PROBE() set_probe_deployed(true)
#define STOW_PROBE() set_probe_deployed(false)
#else
#define DEPLOY_PROBE()
#define STOW_PROBE()
#endif
#if ENABLED(HOST_KEEPALIVE_FEATURE)
extern MarlinBusyState busy_state;
#define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0)
#else
#define KEEPALIVE_STATE(n) NOOP
#endif
#if FAN_COUNT > 0
extern int16_t fanSpeeds[FAN_COUNT];
#if ENABLED(EXTRA_FAN_SPEED)
extern int16_t old_fanSpeeds[FAN_COUNT],
new_fanSpeeds[FAN_COUNT];
#endif
#if ENABLED(PROBING_FANS_OFF)
extern bool fans_paused;
extern int16_t paused_fanSpeeds[FAN_COUNT];
#endif
#endif
#if ENABLED(USE_CONTROLLER_FAN)
extern int controllerFanSpeed;
#endif
#if ENABLED(BARICUDA)
extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
extern bool filament_sensor; // Flag that filament sensor readings should control extrusion
extern float filament_width_nominal, // Theoretical filament diameter i.e., 3.00 or 1.75
filament_width_meas; // Measured filament diameter
extern uint8_t meas_delay_cm; // Delay distance
extern int8_t measurement_delay[MAX_MEASUREMENT_DELAY + 1], // Ring buffer to delay measurement
filwidth_delay_index[2]; // Ring buffer indexes. Used by planner, temperature, and main code
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
extern int8_t did_pause_print;
extern AdvancedPauseMenuResponse advanced_pause_menu_response;
extern float filament_change_unload_length[EXTRUDERS],
filament_change_load_length[EXTRUDERS];
#endif
#if HAS_POWER_SWITCH
extern bool powersupply_on;
#define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0)
#define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0)
#endif
// Handling multiple extruders pins
extern uint8_t active_extruder;
#if ENABLED(MIXING_EXTRUDER)
extern float mixing_factor[MIXING_STEPPERS];
#endif
inline void set_current_from_destination() { COPY(current_position, destination); }
inline void set_destination_from_current() { COPY(destination, current_position); }
void prepare_move_to_destination();
/**
* Blocking movement and shorthand functions
*/
void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s=0);
void do_blocking_move_to_x(const float &rx, const float &fr_mm_s=0);
void do_blocking_move_to_z(const float &rz, const float &fr_mm_s=0);
void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s=0);
#if ENABLED(ARC_SUPPORT)
void plan_arc(const float(&cart)[XYZE], const float(&offset)[2], const bool clockwise);
#endif
#define HAS_AXIS_UNHOMED_ERR ( \
ENABLED(Z_PROBE_ALLEN_KEY) \
|| ENABLED(Z_PROBE_SLED) \
|| HAS_PROBING_PROCEDURE \
|| HOTENDS > 1 \
|| ENABLED(NOZZLE_CLEAN_FEATURE) \
|| ENABLED(NOZZLE_PARK_FEATURE) \
|| (ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(HOME_BEFORE_FILAMENT_CHANGE)) \
|| HAS_M206_COMMAND \
) || ENABLED(NO_MOTION_BEFORE_HOMING)
#if HAS_AXIS_UNHOMED_ERR
bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true);
#endif
/**
* position_is_reachable family of functions
*/
#if IS_KINEMATIC // (DELTA or SCARA)
#if IS_SCARA
extern const float L1, L2;
#endif
// Return true if the given point is within the printable area
inline bool position_is_reachable(const float &rx, const float &ry, const float inset=0) {
#if ENABLED(DELTA)
return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS - inset);
#elif ENABLED(HANGPRINTER)
// TODO: This is over simplified. Hangprinter's build volume is _not_ cylindrical.
return HYPOT2(rx, ry) <= sq(HANGPRINTER_PRINTABLE_RADIUS - inset);
#elif IS_SCARA
const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y);
return (
R2 <= sq(L1 + L2) - inset
#if MIDDLE_DEAD_ZONE_R > 0
&& R2 >= sq(float(MIDDLE_DEAD_ZONE_R))
#endif
);
#endif
}
#if HAS_BED_PROBE
// Return true if the both nozzle and the probe can reach the given point.
// Note: This won't work on SCARA since the probe offset rotates with the arm.
inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER))
&& position_is_reachable(rx, ry, ABS(MIN_PROBE_EDGE));
}
#endif
#else // CARTESIAN
// Return true if the given position is within the machine bounds.
inline bool position_is_reachable(const float &rx, const float &ry) {
// Add 0.001 margin to deal with float imprecision
return WITHIN(rx, X_MIN_POS - 0.001f, X_MAX_POS + 0.001f)
&& WITHIN(ry, Y_MIN_POS - 0.001f, Y_MAX_POS + 0.001f);
}
#if HAS_BED_PROBE
/**
* Return whether the given position is within the bed, and whether the nozzle
* can reach the position required to put the probe at the given position.
*
* Example: For a probe offset of -10,+10, then for the probe to reach 0,0 the
* nozzle must be be able to reach +10,-10.
*/
inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER))
&& WITHIN(rx, MIN_PROBE_X - 0.001f, MAX_PROBE_X + 0.001f)
&& WITHIN(ry, MIN_PROBE_Y - 0.001f, MAX_PROBE_Y + 0.001f);
}
#endif
#endif // CARTESIAN
#if !HAS_BED_PROBE
FORCE_INLINE bool position_is_reachable_by_probe(const float &rx, const float &ry) { return position_is_reachable(rx, ry); }
#endif
#endif // MARLIN_H

53
Marlin/Marlin.ino Normal file
View file

@ -0,0 +1,53 @@
/*
================================================================================
Marlin Firmware
(c) 2011-2018 MarlinFirmware
Portions of Marlin are (c) by their respective authors.
All code complies with GPLv2 and/or GPLv3
================================================================================
Greetings! Thank you for choosing Marlin as your 3D printer firmware.
To configure Marlin you must edit Configuration.h and Configuration_adv.h
located in the root 'Marlin' folder. Check the example_configurations folder to
see if there's a more suitable starting-point for your specific hardware.
Before diving in, we recommend the following essential links:
Marlin Firmware Official Website
- http://marlinfw.org/
The official Marlin Firmware website contains the most up-to-date
documentation. Contributions are always welcome!
Configuration
- https://www.youtube.com/watch?v=3gwWVFtdg-4
A good 20-minute overview of Marlin configuration by Tom Sanladerer.
(Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
- http://marlinfw.org/docs/configuration/configuration.html
Marlin's configuration options are explained in more detail here.
Getting Help
- http://forums.reprap.org/list.php?415
The Marlin Discussion Forum is a great place to get help from other Marlin
users who may have experienced similar issues to your own.
- https://github.com/MarlinFirmware/Marlin/issues
With a free GitHub account you can provide us with feedback, bug reports,
and feature requests via the Marlin Issue Queue.
Contributing
- http://marlinfw.org/docs/development/contributing.html
If you'd like to contribute to Marlin, read this first!
- http://marlinfw.org/docs/development/coding_standards.html
Before submitting code get to know the Coding Standards.
*/

48
Marlin/MarlinConfig.h Normal file
View file

@ -0,0 +1,48 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef MARLIN_CONFIG_H
#define MARLIN_CONFIG_H
#include "boards.h"
#include "macros.h"
#include "Version.h"
#include "Configuration.h"
#include "Conditionals_LCD.h"
#include "drivers.h"
#include "Configuration_adv.h"
#if USE_MARLINSERIAL
#define HardwareSerial_h // trick to disable the standard HWserial
#endif
#include "types.h"
#include "HAL.h"
#include "pins.h"
#include "Conditionals_post.h"
#include "SanityCheck.h"
#include "enum.h"
#include "language.h"
#include "utility.h"
#include "serial.h"
#endif // MARLIN_CONFIG_H

57
Marlin/MarlinSPI.h Normal file
View file

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __MARLIN_SPI_H__
#define __MARLIN_SPI_H__
#include <stdint.h>
#include "softspi.h"
template<uint8_t MisoPin, uint8_t MosiPin, uint8_t SckPin>
class SPI {
static SoftSPI<MisoPin, MosiPin, SckPin> softSPI;
public:
FORCE_INLINE static void init() { softSPI.begin(); }
FORCE_INLINE static void send(uint8_t data) { softSPI.send(data); }
FORCE_INLINE static uint8_t receive() { return softSPI.receive(); }
};
// Hardware SPI
template<>
class SPI<MISO_PIN, MOSI_PIN, SCK_PIN> {
public:
FORCE_INLINE static void init() {
OUT_WRITE(SCK_PIN, LOW);
OUT_WRITE(MOSI_PIN, HIGH);
SET_INPUT(MISO_PIN);
WRITE(MISO_PIN, HIGH);
}
FORCE_INLINE static uint8_t receive() {
SPDR = 0;
while (!TEST(SPSR, SPIF)) { /* nada */ }
return SPDR;
}
};
#endif // __MARLIN_SPI_H__

740
Marlin/MarlinSerial.cpp Normal file
View file

@ -0,0 +1,740 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MarlinSerial.cpp - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* Modified 23 November 2006 by David A. Mellis
* Modified 28 September 2010 by Mark Sproul
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
* Modified 10 June 2018 by Eduardo José Tagle (See #10991)
*/
// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
#include "MarlinConfig.h"
#if USE_MARLINSERIAL && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#include "MarlinSerial.h"
#include "Marlin.h"
struct ring_buffer_r {
unsigned char buffer[RX_BUFFER_SIZE];
volatile ring_buffer_pos_t head, tail;
};
#if TX_BUFFER_SIZE > 0
struct ring_buffer_t {
unsigned char buffer[TX_BUFFER_SIZE];
volatile uint8_t head, tail;
};
#endif
#if UART_PRESENT(SERIAL_PORT)
ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
#if TX_BUFFER_SIZE > 0
ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
#endif
static bool _written;
#endif
#if ENABLED(SERIAL_XON_XOFF)
constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80, // XON / XOFF Character was sent
XON_XOFF_CHAR_MASK = 0x1F; // XON / XOFF character to send
// XON / XOFF character definitions
constexpr uint8_t XON_CHAR = 17, XOFF_CHAR = 19;
uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR;
#endif
#if ENABLED(SERIAL_STATS_DROPPED_RX)
uint8_t rx_dropped_bytes = 0;
#endif
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
uint8_t rx_buffer_overruns = 0;
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
uint8_t rx_framing_errors = 0;
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
ring_buffer_pos_t rx_max_enqueued = 0;
#endif
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() asm volatile("": : :"memory");
#if ENABLED(EMERGENCY_PARSER)
#include "emergency_parser.h"
#endif
// "Atomically" read the RX head index value without disabling interrupts:
// This MUST be called with RX interrupts enabled, and CAN'T be called
// from the RX ISR itself!
FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head() {
#if RX_BUFFER_SIZE > 256
// Keep reading until 2 consecutive reads return the same value,
// meaning there was no update in-between caused by an interrupt.
// This works because serial RX interrupts happen at a slower rate
// than successive reads of a variable, so 2 consecutive reads with
// the same value means no interrupt updated it.
ring_buffer_pos_t vold, vnew = rx_buffer.head;
sw_barrier();
do {
vold = vnew;
vnew = rx_buffer.head;
sw_barrier();
} while (vold != vnew);
return vnew;
#else
// With an 8bit index, reads are always atomic. No need for special handling
return rx_buffer.head;
#endif
}
#if RX_BUFFER_SIZE > 256
static volatile bool rx_tail_value_not_stable = false;
static volatile uint16_t rx_tail_value_backup = 0;
#endif
// Set RX tail index, taking into account the RX ISR could interrupt
// the write to this variable in the middle - So a backup strategy
// is used to ensure reads of the correct values.
// -Must NOT be called from the RX ISR -
FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value) {
#if RX_BUFFER_SIZE > 256
// Store the new value in the backup
rx_tail_value_backup = value;
sw_barrier();
// Flag we are about to change the true value
rx_tail_value_not_stable = true;
sw_barrier();
// Store the new value
rx_buffer.tail = value;
sw_barrier();
// Signal the new value is completely stored into the value
rx_tail_value_not_stable = false;
sw_barrier();
#else
rx_buffer.tail = value;
#endif
}
// Get the RX tail index, taking into account the read could be
// interrupting in the middle of the update of that index value
// -Called from the RX ISR -
FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail() {
#if RX_BUFFER_SIZE > 256
// If the true index is being modified, return the backup value
if (rx_tail_value_not_stable) return rx_tail_value_backup;
#endif
// The true index is stable, return it
return rx_buffer.tail;
}
// (called with RX interrupts disabled)
FORCE_INLINE void store_rxd_char() {
// Get the tail - Nothing can alter its value while this ISR is executing, but there's
// a chance that this ISR interrupted the main process while it was updating the index.
// The backup mechanism ensures the correct value is always returned.
const ring_buffer_pos_t t = atomic_read_rx_tail();
// Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
ring_buffer_pos_t h = rx_buffer.head;
// Get the next element
ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
// This must read the M_UCSRxA register before reading the received byte to detect error causes
#if ENABLED(SERIAL_STATS_DROPPED_RX)
if (TEST(M_UCSRxA, M_DORx) && !++rx_dropped_bytes) --rx_dropped_bytes;
#endif
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
if (TEST(M_UCSRxA, M_DORx) && !++rx_buffer_overruns) --rx_buffer_overruns;
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
if (TEST(M_UCSRxA, M_FEx) && !++rx_framing_errors) --rx_framing_errors;
#endif
// Read the character from the USART
uint8_t c = M_UDRx;
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(c);
#endif
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the RX FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
#if ENABLED(SERIAL_STATS_DROPPED_RX)
else if (!++rx_dropped_bytes) --rx_dropped_bytes;
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
// Calculate count of bytes stored into the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
// Keep track of the maximum count of enqueued bytes
NOLESS(rx_max_enqueued, rx_count);
#endif
#if ENABLED(SERIAL_XON_XOFF)
// If the last char that was sent was an XON
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
// Bytes stored into the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
// If over 12.5% of RX buffer capacity, send XOFF before running out of
// RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
// and stop sending bytes. This translates to 13mS propagation time.
if (rx_count >= (RX_BUFFER_SIZE) / 8) {
// At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
// Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
// to be in the middle of trying to disable the RX interrupt in the main program, eventually the
// enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
// the sending of the XOFF char is to send it HERE AND NOW.
// About to send the XOFF char
xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
// Wait until the TX register becomes empty and send it - Here there could be a problem
// - While waiting for the TX register to empty, the RX register could receive a new
// character. This must also handle that situation!
while (!TEST(M_UCSRxA, M_UDREx)) {
if (TEST(M_UCSRxA,M_RXCx)) {
// A char arrived while waiting for the TX buffer to be empty - Receive and process it!
i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
// Read the character from the USART
c = M_UDRx;
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(c);
#endif
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
#if ENABLED(SERIAL_STATS_DROPPED_RX)
else if (!++rx_dropped_bytes) --rx_dropped_bytes;
#endif
}
sw_barrier();
}
M_UDRx = XOFF_CHAR;
// Clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
SBI(M_UCSRxA, M_TXCx);
// At this point there could be a race condition between the write() function
// and this sending of the XOFF char. This interrupt could happen between the
// wait to be empty TX buffer loop and the actual write of the character. Since
// the TX buffer is full because it's sending the XOFF char, the only way to be
// sure the write() function will succeed is to wait for the XOFF char to be
// completely sent. Since an extra character could be received during the wait
// it must also be handled!
while (!TEST(M_UCSRxA, M_UDREx)) {
if (TEST(M_UCSRxA,M_RXCx)) {
// A char arrived while waiting for the TX buffer to be empty - Receive and process it!
i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
// Read the character from the USART
c = M_UDRx;
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(c);
#endif
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
#if ENABLED(SERIAL_STATS_DROPPED_RX)
else if (!++rx_dropped_bytes) --rx_dropped_bytes;
#endif
}
sw_barrier();
}
// At this point everything is ready. The write() function won't
// have any issues writing to the UART TX register if it needs to!
}
}
#endif // SERIAL_XON_XOFF
// Store the new head value - The main loop will retry until the value is stable
rx_buffer.head = h;
}
#if TX_BUFFER_SIZE > 0
// (called with TX irqs disabled)
FORCE_INLINE void _tx_udr_empty_irq(void) {
// Read positions
uint8_t t = tx_buffer.tail;
const uint8_t h = tx_buffer.head;
#if ENABLED(SERIAL_XON_XOFF)
// If an XON char is pending to be sent, do it now
if (xon_xoff_state == XON_CHAR) {
// Send the character
M_UDRx = XON_CHAR;
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
SBI(M_UCSRxA, M_TXCx);
// Remember we sent it.
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
// If nothing else to transmit, just disable TX interrupts.
if (h == t) CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
return;
}
#endif
// If nothing to transmit, just disable TX interrupts. This could
// happen as the result of the non atomicity of the disabling of RX
// interrupts that could end reenabling TX interrupts as a side effect.
if (h == t) {
CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
return;
}
// There is something to TX, Send the next byte
const uint8_t c = tx_buffer.buffer[t];
t = (t + 1) & (TX_BUFFER_SIZE - 1);
M_UDRx = c;
tx_buffer.tail = t;
// Clear the TXC bit (by writing a one to its bit location).
// Ensures flush() won't return until the bytes are actually written/
SBI(M_UCSRxA, M_TXCx);
// Disable interrupts if there is nothing to transmit following this byte
if (h == t) CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
}
#ifdef M_USARTx_UDRE_vect
ISR(M_USARTx_UDRE_vect) { _tx_udr_empty_irq(); }
#endif
#endif // TX_BUFFER_SIZE
#ifdef M_USARTx_RX_vect
ISR(M_USARTx_RX_vect) { store_rxd_char(); }
#endif
// Public Methods
void MarlinSerial::begin(const long baud) {
uint16_t baud_setting;
bool useU2X = true;
#if F_CPU == 16000000UL && SERIAL_PORT == 0
// Hard-coded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards, and the firmware on the
// 8U2 on the Uno and Mega 2560.
if (baud == 57600) useU2X = false;
#endif
if (useU2X) {
M_UCSRxA = _BV(M_U2Xx);
baud_setting = (F_CPU / 4 / baud - 1) / 2;
}
else {
M_UCSRxA = 0;
baud_setting = (F_CPU / 8 / baud - 1) / 2;
}
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
M_UBRRxH = baud_setting >> 8;
M_UBRRxL = baud_setting;
SBI(M_UCSRxB, M_RXENx);
SBI(M_UCSRxB, M_TXENx);
SBI(M_UCSRxB, M_RXCIEx);
#if TX_BUFFER_SIZE > 0
CBI(M_UCSRxB, M_UDRIEx);
#endif
_written = false;
}
void MarlinSerial::end() {
CBI(M_UCSRxB, M_RXENx);
CBI(M_UCSRxB, M_TXENx);
CBI(M_UCSRxB, M_RXCIEx);
CBI(M_UCSRxB, M_UDRIEx);
}
int MarlinSerial::peek(void) {
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return h == t ? -1 : rx_buffer.buffer[t];
}
int MarlinSerial::read(void) {
const ring_buffer_pos_t h = atomic_read_rx_head();
// Read the tail. Main thread owns it, so it is safe to directly read it
ring_buffer_pos_t t = rx_buffer.tail;
// If nothing to read, return now
if (h == t) return -1;
// Get the next char
const int v = rx_buffer.buffer[t];
t = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1);
// Advance tail - Making sure the RX ISR will always get an stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(t);
#if ENABLED(SERIAL_XON_XOFF)
// If the XOFF char was sent, or about to be sent...
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
// Get count of bytes in the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
if (rx_count < (RX_BUFFER_SIZE) / 10) {
#if TX_BUFFER_SIZE > 0
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX ISR. Non atomic, but it will eventually enable them
SBI(M_UCSRxB, M_UDRIEx);
#else
// If not using TX interrupts, we must send the XON char now
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier();
M_UDRx = XON_CHAR;
#endif
}
}
#endif
return v;
}
ring_buffer_pos_t MarlinSerial::available(void) {
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
}
void MarlinSerial::flush(void) {
// Set the tail to the head:
// - Read the RX head index in a safe way. (See atomic_read_rx_head.)
// - Set the tail, making sure the RX ISR will always get a stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(atomic_read_rx_head());
#if ENABLED(SERIAL_XON_XOFF)
// If the XOFF char was sent, or about to be sent...
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
#if TX_BUFFER_SIZE > 0
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX ISR. Non atomic, but it will eventually enable it.
SBI(M_UCSRxB, M_UDRIEx);
#else
// If not using TX interrupts, we must send the XON char now
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier();
M_UDRx = XON_CHAR;
#endif
}
#endif
}
#if TX_BUFFER_SIZE > 0
void MarlinSerial::write(const uint8_t c) {
_written = true;
// If the TX interrupts are disabled and the data register
// is empty, just write the byte to the data register and
// be done. This shortcut helps significantly improve the
// effective datarate at high (>500kbit/s) bitrates, where
// interrupt overhead becomes a slowdown.
// Yes, there is a race condition between the sending of the
// XOFF char at the RX ISR, but it is properly handled there
if (!TEST(M_UCSRxB, M_UDRIEx) && TEST(M_UCSRxA, M_UDREx)) {
M_UDRx = c;
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
SBI(M_UCSRxA, M_TXCx);
return;
}
const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
// Make room by polling if it is possible to transmit, and do so!
while (i == tx_buffer.tail) {
// If we can transmit another byte, do it.
if (TEST(M_UCSRxA, M_UDREx)) _tx_udr_empty_irq();
// Make sure compiler rereads tx_buffer.tail
sw_barrier();
}
}
else {
// Interrupts are enabled, just wait until there is space
while (i == tx_buffer.tail) { sw_barrier(); }
}
// Store new char. head is always safe to move
tx_buffer.buffer[tx_buffer.head] = c;
tx_buffer.head = i;
// Enable TX ISR - Non atomic, but it will eventually enable TX ISR
SBI(M_UCSRxB, M_UDRIEx);
}
void MarlinSerial::flushTX(void) {
// No bytes written, no need to flush. This special case is needed since there's
// no way to force the TXC (transmit complete) bit to 1 during initialization.
if (!_written) return;
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
// Wait until everything was transmitted - We must do polling, as interrupts are disabled
while (tx_buffer.head != tx_buffer.tail || !TEST(M_UCSRxA, M_TXCx)) {
// If there is more space, send an extra character
if (TEST(M_UCSRxA, M_UDREx))
_tx_udr_empty_irq();
sw_barrier();
}
}
else {
// Wait until everything was transmitted
while (tx_buffer.head != tx_buffer.tail || !TEST(M_UCSRxA, M_TXCx)) sw_barrier();
}
// At this point nothing is queued anymore (DRIE is disabled) and
// the hardware finished transmission (TXC is set).
}
#else // TX_BUFFER_SIZE == 0
void MarlinSerial::write(const uint8_t c) {
_written = true;
while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier();
M_UDRx = c;
}
void MarlinSerial::flushTX(void) {
// No bytes written, no need to flush. This special case is needed since there's
// no way to force the TXC (transmit complete) bit to 1 during initialization.
if (!_written) return;
// Wait until everything was transmitted
while (!TEST(M_UCSRxA, M_TXCx)) sw_barrier();
// At this point nothing is queued anymore (DRIE is disabled) and
// the hardware finished transmission (TXC is set).
}
#endif // TX_BUFFER_SIZE == 0
/**
* Imports from print.h
*/
void MarlinSerial::print(char c, int base) {
print((long)c, base);
}
void MarlinSerial::print(unsigned char b, int base) {
print((unsigned long)b, base);
}
void MarlinSerial::print(int n, int base) {
print((long)n, base);
}
void MarlinSerial::print(unsigned int n, int base) {
print((unsigned long)n, base);
}
void MarlinSerial::print(long n, int base) {
if (base == 0) write(n);
else if (base == 10) {
if (n < 0) { print('-'); n = -n; }
printNumber(n, 10);
}
else
printNumber(n, base);
}
void MarlinSerial::print(unsigned long n, int base) {
if (base == 0) write(n);
else printNumber(n, base);
}
void MarlinSerial::print(double n, int digits) {
printFloat(n, digits);
}
void MarlinSerial::println(void) {
print('\r');
print('\n');
}
void MarlinSerial::println(const String& s) {
print(s);
println();
}
void MarlinSerial::println(const char c[]) {
print(c);
println();
}
void MarlinSerial::println(char c, int base) {
print(c, base);
println();
}
void MarlinSerial::println(unsigned char b, int base) {
print(b, base);
println();
}
void MarlinSerial::println(int n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(unsigned int n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(long n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(unsigned long n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(double n, int digits) {
print(n, digits);
println();
}
// Private Methods
void MarlinSerial::printNumber(unsigned long n, uint8_t base) {
if (n) {
unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
int8_t i = 0;
while (n) {
buf[i++] = n % base;
n /= base;
}
while (i--)
print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
}
else
print('0');
}
void MarlinSerial::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0) {
print('-');
number = -number;
}
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
for (uint8_t i = 0; i < digits; ++i)
rounding *= 0.1;
number += rounding;
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
double remainder = number - (double)int_part;
print(int_part);
// Print the decimal point, but only if there are digits beyond
if (digits) {
print('.');
// Extract digits from the remainder one at a time
while (digits--) {
remainder *= 10.0;
int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}
}
// Preinstantiate
MarlinSerial customizedSerial;
#endif // USE_MARLINSERIAL && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
// For AT90USB targets use the UART for BT interfacing
#if !USE_MARLINSERIAL && ENABLED(BLUETOOTH)
HardwareSerial bluetoothSerial;
#endif

184
Marlin/MarlinSerial.h Normal file
View file

@ -0,0 +1,184 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MarlinSerial.h - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* Modified 28 September 2010 by Mark Sproul
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
*/
#ifndef _MARLINSERIAL_H_
#define _MARLINSERIAL_H_
#include "MarlinConfig.h"
#ifndef SERIAL_PORT
#define SERIAL_PORT 0
#endif
// The presence of the UBRRH register is used to detect a UART.
#define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \
(port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
(port == 3 && defined(UBRR3H)))
// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
// requires two levels of indirection to expand macro values properly)
#define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
#else
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
#endif
// Registers used by MarlinSerial class (expanded depending on selected serial port)
#define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number
#define M_UCSRxB SERIAL_REGNAME(UCSR,SERIAL_PORT,B)
#define M_RXENx SERIAL_REGNAME(RXEN,SERIAL_PORT,)
#define M_TXENx SERIAL_REGNAME(TXEN,SERIAL_PORT,)
#define M_TXCx SERIAL_REGNAME(TXC,SERIAL_PORT,)
#define M_RXCIEx SERIAL_REGNAME(RXCIE,SERIAL_PORT,)
#define M_UDREx SERIAL_REGNAME(UDRE,SERIAL_PORT,)
#define M_FEx SERIAL_REGNAME(FE,SERIAL_PORT,)
#define M_DORx SERIAL_REGNAME(DOR,SERIAL_PORT,)
#define M_UPEx SERIAL_REGNAME(UPE,SERIAL_PORT,)
#define M_UDRIEx SERIAL_REGNAME(UDRIE,SERIAL_PORT,)
#define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,)
#define M_UBRRxH SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
#define M_UBRRxL SERIAL_REGNAME(UBRR,SERIAL_PORT,L)
#define M_RXCx SERIAL_REGNAME(RXC,SERIAL_PORT,)
#define M_USARTx_RX_vect SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)
#define M_U2Xx SERIAL_REGNAME(U2X,SERIAL_PORT,)
#define M_USARTx_UDRE_vect SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect)
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
#define BYTE 0
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
#ifndef RX_BUFFER_SIZE
#define RX_BUFFER_SIZE 128
#endif
// 256 is the max TX buffer limit due to uint8_t head and tail.
#ifndef TX_BUFFER_SIZE
#define TX_BUFFER_SIZE 32
#endif
#if USE_MARLINSERIAL
#if RX_BUFFER_SIZE > 256
typedef uint16_t ring_buffer_pos_t;
#else
typedef uint8_t ring_buffer_pos_t;
#endif
#if ENABLED(SERIAL_STATS_DROPPED_RX)
extern uint8_t rx_dropped_bytes;
#endif
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
extern uint8_t rx_buffer_overruns;
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
extern uint8_t rx_framing_errors;
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
extern ring_buffer_pos_t rx_max_enqueued;
#endif
class MarlinSerial {
public:
MarlinSerial() {};
static void begin(const long);
static void end();
static int peek(void);
static int read(void);
static void flush(void);
static ring_buffer_pos_t available(void);
static void write(const uint8_t c);
static void flushTX(void);
#if ENABLED(SERIAL_STATS_DROPPED_RX)
FORCE_INLINE static uint32_t dropped() { return rx_dropped_bytes; }
#endif
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
FORCE_INLINE static uint32_t buffer_overruns() { return rx_buffer_overruns; }
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
FORCE_INLINE static uint32_t framing_errors() { return rx_framing_errors; }
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return rx_max_enqueued; }
#endif
FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE static void print(const char* str) { write(str); }
static void print(char, int = BYTE);
static void print(unsigned char, int = BYTE);
static void print(int, int = DEC);
static void print(unsigned int, int = DEC);
static void print(long, int = DEC);
static void print(unsigned long, int = DEC);
static void print(double, int = 2);
static void println(const String& s);
static void println(const char[]);
static void println(char, int = BYTE);
static void println(unsigned char, int = BYTE);
static void println(int, int = DEC);
static void println(unsigned int, int = DEC);
static void println(long, int = DEC);
static void println(unsigned long, int = DEC);
static void println(double, int = 2);
static void println(void);
operator bool() { return true; }
private:
static void printNumber(unsigned long, const uint8_t);
static void printFloat(double, uint8_t);
};
extern MarlinSerial customizedSerial;
#endif // USE_MARLINSERIAL
// Use the UART for Bluetooth in AT90USB configurations
#if !USE_MARLINSERIAL && ENABLED(BLUETOOTH)
extern HardwareSerial bluetoothSerial;
#endif
#endif // _MARLINSERIAL_H_

15377
Marlin/Marlin_main.cpp Normal file
View file

File diff suppressed because it is too large Load diff

593
Marlin/Max7219_Debug_LEDs.cpp Normal file
View file

@ -0,0 +1,593 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* This module is off by default, but can be enabled to facilitate the display of
* extra debug information during code development.
*
* Just connect up 5V and GND to give it power, then connect up the pins assigned
* in Configuration_adv.h. For example, on the Re-ARM you could use:
*
* #define MAX7219_CLK_PIN 77
* #define MAX7219_DIN_PIN 78
* #define MAX7219_LOAD_PIN 79
*
* send() is called automatically at startup, and then there are a number of
* support functions available to control the LEDs in the 8x8 grid.
*/
#include "MarlinConfig.h"
#if ENABLED(MAX7219_DEBUG)
#define MAX7219_ERRORS // Disable to save 406 bytes of Program Memory
#include "Max7219_Debug_LEDs.h"
#include "planner.h"
#include "stepper.h"
#include "Marlin.h"
#include "delay.h"
Max7219 max7219;
uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 };
#define LINE_REG(Q) (max7219_reg_digit0 + ((Q) & 0x7))
#if _ROT == 0 || _ROT == 270
#define _LED_BIT(Q) (7 - ((Q) & 0x7))
#define _LED_UNIT(Q) ((Q) & ~0x7)
#else
#define _LED_BIT(Q) ((Q) & 0x7)
#define _LED_UNIT(Q) ((MAX7219_NUMBER_UNITS - 1 - ((Q) >> 3)) << 3)
#endif
#if _ROT < 180
#define _LED_IND(P,Q) (_LED_UNIT(P) + (Q))
#else
#define _LED_IND(P,Q) (_LED_UNIT(P) + (7 - ((Q) & 0x7)))
#endif
#if _ROT == 0 || _ROT == 180
#define LED_IND(X,Y) _LED_IND(X,Y)
#define LED_BIT(X,Y) _LED_BIT(X)
#elif _ROT == 90 || _ROT == 270
#define LED_IND(X,Y) _LED_IND(Y,X)
#define LED_BIT(X,Y) _LED_BIT(Y)
#endif
#define XOR_7219(X,Y) do{ led_line[LED_IND(X,Y)] ^= _BV(LED_BIT(X,Y)); }while(0)
#define SET_7219(X,Y) do{ led_line[LED_IND(X,Y)] |= _BV(LED_BIT(X,Y)); }while(0)
#define CLR_7219(X,Y) do{ led_line[LED_IND(X,Y)] &= ~_BV(LED_BIT(X,Y)); }while(0)
#define BIT_7219(X,Y) TEST(led_line[LED_IND(X,Y)], LED_BIT(X,Y))
#ifdef CPU_32_BIT
#define SIG_DELAY() DELAY_US(1) // Approximate a 1µs delay on 32-bit ARM
#undef CRITICAL_SECTION_START
#undef CRITICAL_SECTION_END
#define CRITICAL_SECTION_START NOOP
#define CRITICAL_SECTION_END NOOP
#else
#define SIG_DELAY() DELAY_NS(188) // Delay for 0.1875µs (16MHz AVR) or 0.15µs (20MHz AVR)
#endif
void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/*=-1*/) {
#if ENABLED(MAX7219_ERRORS)
SERIAL_ECHOPGM("??? Max7219::");
serialprintPGM(func);
SERIAL_CHAR('(');
SERIAL_ECHO(v1);
if (v2 > 0) SERIAL_ECHOPAIR(", ", v2);
SERIAL_CHAR(')');
SERIAL_EOL();
#else
UNUSED(func); UNUSED(v1); UNUSED(v2);
#endif
}
/**
* Flip the lowest n_bytes of the supplied bits:
* flipped(x, 1) flips the low 8 bits of x.
* flipped(x, 2) flips the low 16 bits of x.
* flipped(x, 3) flips the low 24 bits of x.
* flipped(x, 4) flips the low 32 bits of x.
*/
inline uint32_t flipped(const uint32_t bits, const uint8_t n_bytes) {
uint32_t mask = 1, outbits = 0;
for (uint8_t b = 0; b < n_bytes * 8; b++) {
outbits <<= 1;
if (bits & mask) outbits |= 1;
mask <<= 1;
}
return outbits;
}
void Max7219::noop() {
CRITICAL_SECTION_START;
SIG_DELAY();
WRITE(MAX7219_DIN_PIN, LOW);
for (uint8_t i = 16; i--;) {
SIG_DELAY();
WRITE(MAX7219_CLK_PIN, LOW);
SIG_DELAY();
SIG_DELAY();
WRITE(MAX7219_CLK_PIN, HIGH);
SIG_DELAY();
}
CRITICAL_SECTION_END;
}
void Max7219::putbyte(uint8_t data) {
CRITICAL_SECTION_START;
for (uint8_t i = 8; i--;) {
SIG_DELAY();
WRITE(MAX7219_CLK_PIN, LOW); // tick
SIG_DELAY();
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
SIG_DELAY();
WRITE(MAX7219_CLK_PIN, HIGH); // tock
SIG_DELAY();
data <<= 1;
}
CRITICAL_SECTION_END;
}
void Max7219::pulse_load() {
SIG_DELAY();
WRITE(MAX7219_LOAD_PIN, LOW); // tell the chip to load the data
SIG_DELAY();
WRITE(MAX7219_LOAD_PIN, HIGH);
SIG_DELAY();
}
void Max7219::send(const uint8_t reg, const uint8_t data) {
SIG_DELAY();
CRITICAL_SECTION_START;
SIG_DELAY();
putbyte(reg); // specify register
SIG_DELAY();
putbyte(data); // put data
CRITICAL_SECTION_END;
}
// Send out a single native row of bits to all units
void Max7219::refresh_line(const uint8_t line) {
for (uint8_t u = MAX7219_NUMBER_UNITS; u--;)
send(LINE_REG(line), led_line[(u << 3) | (line & 0x7)]);
pulse_load();
}
// Send out a single native row of bits to just one unit
void Max7219::refresh_unit_line(const uint8_t line) {
for (uint8_t u = MAX7219_NUMBER_UNITS; u--;)
if (u == (line >> 3)) send(LINE_REG(line), led_line[line]); else noop();
pulse_load();
}
void Max7219::set(const uint8_t line, const uint8_t bits) {
led_line[line] = bits;
refresh_line(line);
}
#if ENABLED(MAX7219_NUMERIC)
// Draw an integer with optional leading zeros and optional decimal point
void Max7219::print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false) {
constexpr uint8_t led_numeral[10] = { 0x7E, 0x60, 0x6D, 0x79, 0x63, 0x5B, 0x5F, 0x70, 0x7F, 0x7A },
led_decimal = 0x80, led_minus = 0x01;
bool blank = false, neg = value < 0;
if (neg) value *= -1;
while (size--) {
const bool minus = neg && blank;
if (minus) neg = false;
send(
max7219_reg_digit0 + start + size,
minus ? led_minus : blank ? 0x00 : led_numeral[value % 10] | (dec ? led_decimal : 0x00)
);
pulse_load(); // tell the chips to load the clocked out data
value /= 10;
if (!value && !leadzero) blank = true;
dec = false;
}
}
// Draw a float with a decimal point and optional digits
void Max7219::print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) {
if (pre_size) print(start, value, pre_size, leadzero, !!post_size);
if (post_size) {
const int16_t after = ABS(value) * (10 ^ post_size);
print(start + pre_size, after, post_size, true);
}
}
#endif // MAX7219_NUMERIC
// Modify a single LED bit and send the changed line
void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on) {
if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_set"), x, y);
if (BIT_7219(x, y) == on) return;
XOR_7219(x, y);
refresh_line(LED_IND(x, y));
}
void Max7219::led_on(const uint8_t x, const uint8_t y) {
if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_on"), x, y);
led_set(x, y, true);
}
void Max7219::led_off(const uint8_t x, const uint8_t y) {
if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_off"), x, y);
led_set(x, y, false);
}
void Max7219::led_toggle(const uint8_t x, const uint8_t y) {
if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_toggle"), x, y);
led_set(x, y, !BIT_7219(x, y));
}
void Max7219::send_row(const uint8_t row) {
#if _ROT == 0 || _ROT == 180
refresh_line(LED_IND(0, row));
#else
UNUSED(row);
refresh();
#endif
}
void Max7219::send_column(const uint8_t col) {
#if _ROT == 90 || _ROT == 270
refresh_line(LED_IND(col, 0));
#else
UNUSED(col);
refresh();
#endif
}
void Max7219::clear() {
ZERO(led_line);
refresh();
}
void Max7219::fill() {
memset(led_line, 0xFF, sizeof(led_line));
refresh();
}
void Max7219::clear_row(const uint8_t row) {
if (row >= MAX7219_Y_LEDS) return error(PSTR("clear_row"), row);
for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) CLR_7219(x, row);
send_row(row);
}
void Max7219::clear_column(const uint8_t col) {
if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col);
for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) CLR_7219(col, y);
send_column(col);
}
/**
* Plot the low order bits of val to the specified row of the matrix.
* With 4 Max7219 units in the chain, it's possible to set 32 bits at once with
* one call to the function (if rotated 90° or 180°).
*/
void Max7219::set_row(const uint8_t row, const uint32_t val) {
if (row >= MAX7219_Y_LEDS) return error(PSTR("set_row"), row);
uint32_t mask = _BV32(MAX7219_X_LEDS - 1);
for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) {
if (val & mask) SET_7219(x, row); else CLR_7219(x, row);
mask >>= 1;
}
send_row(row);
}
/**
* Plot the low order bits of val to the specified column of the matrix.
* With 4 Max7219 units in the chain, it's possible to set 32 bits at once with
* one call to the function (if rotated 90° or 180°).
*/
void Max7219::set_column(const uint8_t col, const uint32_t val) {
if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col);
uint32_t mask = _BV32(MAX7219_Y_LEDS - 1);
for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) {
if (val & mask) SET_7219(col, y); else CLR_7219(col, y);
mask >>= 1;
}
send_column(col);
}
void Max7219::set_rows_16bits(const uint8_t y, uint32_t val) {
#if MAX7219_X_LEDS == 8
if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_16bits"), y, val);
set_row(y + 1, val); val >>= 8;
set_row(y + 0, val);
#else // at least 16 bits on each row
if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_16bits"), y, val);
set_row(y, val);
#endif
}
void Max7219::set_rows_32bits(const uint8_t y, uint32_t val) {
#if MAX7219_X_LEDS == 8
if (y > MAX7219_Y_LEDS - 4) return error(PSTR("set_rows_32bits"), y, val);
set_row(y + 3, val); val >>= 8;
set_row(y + 2, val); val >>= 8;
set_row(y + 1, val); val >>= 8;
set_row(y + 0, val);
#elif MAX7219_X_LEDS == 16
if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_32bits"), y, val);
set_row(y + 1, val); val >>= 16;
set_row(y + 0, val);
#else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits
if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_32bits"), y, val);
set_row(y, val);
#endif
}
void Max7219::set_columns_16bits(const uint8_t x, uint32_t val) {
#if MAX7219_Y_LEDS == 8
if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_columns_16bits"), x, val);
set_column(x + 0, val); val >>= 8;
set_column(x + 1, val);
#else // at least 16 bits in each column
if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_columns_16bits"), x, val);
set_column(x, val);
#endif
}
void Max7219::set_columns_32bits(const uint8_t x, uint32_t val) {
#if MAX7219_Y_LEDS == 8
if (x > MAX7219_X_LEDS - 4) return error(PSTR("set_rows_32bits"), x, val);
set_column(x + 3, val); val >>= 8;
set_column(x + 2, val); val >>= 8;
set_column(x + 1, val); val >>= 8;
set_column(x + 0, val);
#elif MAX7219_Y_LEDS == 16
if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_rows_32bits"), x, val);
set_column(x + 1, val); val >>= 16;
set_column(x + 0, val);
#else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits
if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_rows_32bits"), x, val);
set_column(x, val);
#endif
}
// Initialize the Max7219
void Max7219::register_setup() {
for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
send(max7219_reg_scanLimit, 0x07);
pulse_load(); // tell the chips to load the clocked out data
for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
send(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits)
pulse_load(); // tell the chips to load the clocked out data
for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
send(max7219_reg_shutdown, 0x01); // not in shutdown mode
pulse_load(); // tell the chips to load the clocked out data
for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
send(max7219_reg_displayTest, 0x00); // no display test
pulse_load(); // tell the chips to load the clocked out data
for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
send(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
// range: 0x00 to 0x0F
pulse_load(); // tell the chips to load the clocked out data
}
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST == 2
void Max7219::spiral(const bool on, const uint16_t del) {
constexpr int8_t way[] = { 1, 0, 0, 1, -1, 0, 0, -1 };
int8_t px = 0, py = 0, dir = 0;
for (uint8_t i = MAX7219_X_LEDS * MAX7219_Y_LEDS; i--;) {
led_set(px, py, on);
delay(del);
const int8_t x = px + way[dir], y = py + way[dir + 1];
if (!WITHIN(x, 0, MAX7219_X_LEDS-1) || !WITHIN(y, 0, MAX7219_Y_LEDS-1) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7;
px += way[dir]; py += way[dir + 1];
}
}
#else
void Max7219::sweep(const int8_t dir, const uint16_t ms, const bool on) {
uint8_t x = dir > 0 ? 0 : MAX7219_X_LEDS-1;
for (uint8_t i = MAX7219_X_LEDS; i--; x += dir) {
set_column(x, on ? 0xFFFFFFFF : 0x00000000);
delay(ms);
}
}
#endif
#endif // MAX7219_INIT_TEST
void Max7219::init() {
SET_OUTPUT(MAX7219_DIN_PIN);
SET_OUTPUT(MAX7219_CLK_PIN);
OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
delay(1);
register_setup();
for (uint8_t i = 0; i <= 7; i++) { // Empty registers to turn all LEDs off
led_line[i] = 0x00;
send(max7219_reg_digit0 + i, 0);
pulse_load(); // tell the chips to load the clocked out data
}
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST == 2
spiral(true, 8);
delay(150);
spiral(false, 8);
#else
// Do an aesthetically-pleasing pattern to fully test the Max7219 module and LEDs.
// Light up and turn off columns, both forward and backward.
sweep(1, 20, true);
sweep(1, 20, false);
delay(150);
sweep(-1, 20, true);
sweep(-1, 20, false);
#endif
#endif
}
/**
* This code demonstrates some simple debugging using a single 8x8 LED Matrix. If your feature could
* benefit from matrix display, add its code here. Very little processing is required, so the 7219 is
* ideal for debugging when realtime feedback is important but serial output can't be used.
*/
// Apply changes to update a marker
void Max7219::mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) {
#if MAX7219_X_LEDS == 8
#if MAX7219_Y_LEDS == 8
led_off(v1 & 0x7, y + (v1 >= 8));
led_on(v2 & 0x7, y + (v2 >= 8));
#else
led_off(y, v1 & 0xF); // At least 16 LEDs down. Use a single column.
led_on(y, v2 & 0xF);
#endif
#else
led_off(v1 & 0xF, y); // At least 16 LEDs across. Use a single row.
led_on(v2 & 0xF, y);
#endif
}
// Apply changes to update a tail-to-head range
void Max7219::range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) {
#if MAX7219_X_LEDS == 8
#if MAX7219_Y_LEDS == 8
if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
led_off(n & 0x7, y + (n >= 8));
if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
led_on(n & 0x7, y + (n >= 8));
#else // The Max7219 Y-Axis has at least 16 LED's. So use a single column
if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
led_off(y, n & 0xF);
if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
led_on(y, n & 0xF);
#endif
#else // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's
if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
led_off(n & 0xF, y);
if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
led_on(n & 0xF, y);
#endif
}
// Apply changes to update a quantity
void Max7219::quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) {
for (uint8_t i = MIN(nv, ov); i < MAX(nv, ov); i++)
#if MAX7219_X_LEDS == 8
#if MAX7219_Y_LEDS == 8
led_set(i >> 1, y + (i & 1), nv >= ov); // single 8x8 LED matrix. Use two lines to get 16 LED's
#else
led_set(y, i, nv >= ov); // The Max7219 Y-Axis has at least 16 LED's. So use a single column
#endif
#else
led_set(i, y, nv >= ov); // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's
#endif
}
void Max7219::idle_tasks() {
#define MAX7219_USE_HEAD (defined(MAX7219_DEBUG_PLANNER_HEAD) || defined(MAX7219_DEBUG_PLANNER_QUEUE))
#define MAX7219_USE_TAIL (defined(MAX7219_DEBUG_PLANNER_TAIL) || defined(MAX7219_DEBUG_PLANNER_QUEUE))
#if MAX7219_USE_HEAD || MAX7219_USE_TAIL
CRITICAL_SECTION_START;
#if MAX7219_USE_HEAD
const uint8_t head = planner.block_buffer_head;
#endif
#if MAX7219_USE_TAIL
const uint8_t tail = planner.block_buffer_tail;
#endif
CRITICAL_SECTION_END;
#endif
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
static uint8_t refresh_cnt; // = 0
constexpr uint16_t refresh_limit = 5;
static millis_t next_blink = 0;
const millis_t ms = millis();
const bool do_blink = ELAPSED(ms, next_blink);
#else
static uint16_t refresh_cnt; // = 0
constexpr bool do_blink = true;
constexpr uint16_t refresh_limit = 50000;
#endif
// Some Max7219 units are vulnerable to electrical noise, especially
// with long wires next to high current wires. If the display becomes
// corrupted, this will fix it within a couple seconds.
if (do_blink && ++refresh_cnt >= refresh_limit) {
refresh_cnt = 0;
register_setup();
}
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
if (do_blink) {
led_toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1);
next_blink = ms + 1000;
}
#endif
#if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL
static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF;
if (last_head_cnt != head || last_tail_cnt != tail) {
range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head);
last_head_cnt = head;
last_tail_cnt = tail;
}
#else
#ifdef MAX7219_DEBUG_PLANNER_HEAD
static int16_t last_head_cnt = 0x1;
if (last_head_cnt != head) {
mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head);
last_head_cnt = head;
}
#endif
#ifdef MAX7219_DEBUG_PLANNER_TAIL
static int16_t last_tail_cnt = 0x1;
if (last_tail_cnt != tail) {
mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail);
last_tail_cnt = tail;
}
#endif
#endif
#ifdef MAX7219_DEBUG_PLANNER_QUEUE
static int16_t last_depth = 0;
const int16_t current_depth = (head - tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1) & 0xF;
if (current_depth != last_depth) {
quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth);
last_depth = current_depth;
}
#endif
}
#endif // MAX7219_DEBUG

154
Marlin/Max7219_Debug_LEDs.h Normal file
View file

@ -0,0 +1,154 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* This module is off by default, but can be enabled to facilitate the display of
* extra debug information during code development.
*
* Just connect up 5V and GND to give it power, then connect up the pins assigned
* in Configuration_adv.h. For example, on the Re-ARM you could use:
*
* #define MAX7219_CLK_PIN 77
* #define MAX7219_DIN_PIN 78
* #define MAX7219_LOAD_PIN 79
*
* max7219.init() is called automatically at startup, and then there are a number of
* support functions available to control the LEDs in the 8x8 grid.
*
* If you are using the Max7219 matrix for firmware debug purposes in time sensitive
* areas of the code, please be aware that the orientation (rotation) of the display can
* affect the speed. The Max7219 can update a single column fairly fast. It is much
* faster to do a Max7219_Set_Column() with a rotation of 90 or 270 degrees than to do
* a Max7219_Set_Row(). The opposite is true for rotations of 0 or 180 degrees.
*/
#pragma once
#ifndef MAX7219_ROTATE
#define MAX7219_ROTATE 0
#endif
#define _ROT ((MAX7219_ROTATE + 360) % 360)
#define MAX7219_LINES (8 * (MAX7219_NUMBER_UNITS))
#if _ROT == 0 || _ROT == 180
#define MAX7219_Y_LEDS 8
#define MAX7219_X_LEDS MAX7219_LINES
#elif _ROT == 90 || _ROT == 270
#define MAX7219_X_LEDS 8
#define MAX7219_Y_LEDS MAX7219_LINES
#else
#error "MAX7219_ROTATE must be a multiple of +/- 90°."
#endif
//
// MAX7219 registers
//
#define max7219_reg_noop 0x00
#define max7219_reg_digit0 0x01
#define max7219_reg_digit1 0x02
#define max7219_reg_digit2 0x03
#define max7219_reg_digit3 0x04
#define max7219_reg_digit4 0x05
#define max7219_reg_digit5 0x06
#define max7219_reg_digit6 0x07
#define max7219_reg_digit7 0x08
#define max7219_reg_decodeMode 0x09
#define max7219_reg_intensity 0x0A
#define max7219_reg_scanLimit 0x0B
#define max7219_reg_shutdown 0x0C
#define max7219_reg_displayTest 0x0F
class Max7219 {
public:
static uint8_t led_line[MAX7219_LINES];
Max7219() { }
static void init();
static void register_setup();
static void putbyte(uint8_t data);
static void pulse_load();
// Set a single register (e.g., a whole native row)
static void send(const uint8_t reg, const uint8_t data);
// Refresh all units
inline static void refresh() { for (uint8_t i = 0; i < 8; i++) refresh_line(i); }
// Update a single native line on all units
static void refresh_line(const uint8_t line);
// Update a single native line on just one unit
static void refresh_unit_line(const uint8_t line);
// Set a single LED by XY coordinate
static void led_set(const uint8_t x, const uint8_t y, const bool on);
static void led_on(const uint8_t x, const uint8_t y);
static void led_off(const uint8_t x, const uint8_t y);
static void led_toggle(const uint8_t x, const uint8_t y);
// Set all LEDs in a single column
static void set_column(const uint8_t col, const uint32_t val);
static void clear_column(const uint8_t col);
// Set all LEDs in a single row
static void set_row(const uint8_t row, const uint32_t val);
static void clear_row(const uint8_t row);
// 16 and 32 bit versions of Row and Column functions
// Multiple rows and columns will be used to display the value if
// the array of matrix LED's is too narrow to accomplish the goal
static void set_rows_16bits(const uint8_t y, uint32_t val);
static void set_rows_32bits(const uint8_t y, uint32_t val);
static void set_columns_16bits(const uint8_t x, uint32_t val);
static void set_columns_32bits(const uint8_t x, uint32_t val);
// Quickly clear the whole matrix
static void clear();
// Quickly fill the whole matrix
static void fill();
// Apply custom code to update the matrix
static void idle_tasks();
private:
static void error(const char * const func, const int32_t v1, const int32_t v2=-1);
static void noop();
static void set(const uint8_t line, const uint8_t bits);
static void send_row(const uint8_t row);
static void send_column(const uint8_t col);
static void mark16(const uint8_t y, const uint8_t v1, const uint8_t v2);
static void range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh);
static void quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv);
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST == 2
static void spiral(const bool on, const uint16_t del);
#else
static void sweep(const int8_t dir, const uint16_t ms, const bool on);
#endif
#endif
};
extern Max7219 max7219;

1705
Marlin/SanityCheck.h Normal file
View file

File diff suppressed because it is too large Load diff

716
Marlin/Sd2Card.cpp Normal file
View file

@ -0,0 +1,716 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#include "MarlinConfig.h"
#if ENABLED(SDSUPPORT)
#include "Sd2Card.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
#endif
#if DISABLED(SOFTWARE_SPI)
// functions for hardware SPI
// make sure SPCR rate is in expected bits
#if (SPR0 != 0 || SPR1 != 1)
#error "unexpected SPCR bits"
#endif
/**
* Initialize hardware SPI
* Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6]
*/
static void spiInit(uint8_t spiRate) {
// See avr processor documentation
SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);
}
/** SPI receive a byte */
static uint8_t spiRec() {
SPDR = 0xFF;
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
return SPDR;
}
/** SPI read data - only one call so force inline */
static inline __attribute__((always_inline))
void spiRead(uint8_t* buf, uint16_t nbyte) {
if (nbyte-- == 0) return;
SPDR = 0xFF;
for (uint16_t i = 0; i < nbyte; i++) {
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
buf[i] = SPDR;
SPDR = 0xFF;
}
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
buf[nbyte] = SPDR;
}
/** SPI send a byte */
static void spiSend(uint8_t b) {
SPDR = b;
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
/** SPI send block - only one call so force inline */
static inline __attribute__((always_inline))
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
SPDR = buf[i];
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
SPDR = buf[i + 1];
}
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
//------------------------------------------------------------------------------
#else // SOFTWARE_SPI
//------------------------------------------------------------------------------
/** nop to tune soft SPI timing */
#define nop asm volatile ("nop\n\t")
/** Soft SPI receive byte */
static uint8_t spiRec() {
uint8_t data = 0;
// no interrupts during byte receive - about 8 us
cli();
// output pin high - like sending 0xFF
WRITE(SPI_MOSI_PIN, HIGH);
for (uint8_t i = 0; i < 8; i++) {
WRITE(SPI_SCK_PIN, HIGH);
// adjust so SCK is nice
nop;
nop;
data <<= 1;
if (READ(SPI_MISO_PIN)) data |= 1;
WRITE(SPI_SCK_PIN, LOW);
}
// enable interrupts
sei();
return data;
}
/** Soft SPI read data */
static void spiRead(uint8_t* buf, uint16_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
buf[i] = spiRec();
}
/** Soft SPI send byte */
static void spiSend(uint8_t data) {
// no interrupts during byte send - about 8 us
cli();
for (uint8_t i = 0; i < 8; i++) {
WRITE(SPI_SCK_PIN, LOW);
WRITE(SPI_MOSI_PIN, data & 0x80);
data <<= 1;
WRITE(SPI_SCK_PIN, HIGH);
}
// hold SCK high for a few ns
nop;
nop;
nop;
nop;
WRITE(SPI_SCK_PIN, LOW);
// enable interrupts
sei();
}
/** Soft SPI send block */
void spiSendBlock(uint8_t token, const uint8_t* buf) {
spiSend(token);
for (uint16_t i = 0; i < 512; i++)
spiSend(buf[i]);
}
#endif // SOFTWARE_SPI
// send command and return error code. Return zero for OK
uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) {
// select card
chipSelectLow();
// wait up to 300 ms if busy
waitNotBusy(300);
// send command
spiSend(cmd | 0x40);
// send argument
for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s);
// send CRC
uint8_t crc = 0xFF;
if (cmd == CMD0) crc = 0x95; // correct crc for CMD0 with arg 0
if (cmd == CMD8) crc = 0x87; // correct crc for CMD8 with arg 0x1AA
spiSend(crc);
// skip stuff byte for stop read
if (cmd == CMD12) spiRec();
// wait for response
for (uint8_t i = 0; ((status_ = spiRec()) & 0x80) && i != 0xFF; i++) { /* Intentionally left empty */ }
return status_;
}
/**
* Determine the size of an SD flash memory card.
*
* \return The number of 512 byte data blocks in the card
* or zero if an error occurs.
*/
uint32_t Sd2Card::cardSize() {
csd_t csd;
if (!readCSD(&csd)) return 0;
if (csd.v1.csd_ver == 0) {
uint8_t read_bl_len = csd.v1.read_bl_len;
uint16_t c_size = (csd.v1.c_size_high << 10)
| (csd.v1.c_size_mid << 2) | csd.v1.c_size_low;
uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1)
| csd.v1.c_size_mult_low;
return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7);
}
else if (csd.v2.csd_ver == 1) {
uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16)
| (csd.v2.c_size_mid << 8) | csd.v2.c_size_low;
return (c_size + 1) << 10;
}
else {
error(SD_CARD_ERROR_BAD_CSD);
return 0;
}
}
void Sd2Card::chipSelectHigh() {
digitalWrite(chipSelectPin_, HIGH);
}
void Sd2Card::chipSelectLow() {
#if DISABLED(SOFTWARE_SPI)
spiInit(spiRate_);
#endif // SOFTWARE_SPI
digitalWrite(chipSelectPin_, LOW);
}
/**
* Erase a range of blocks.
*
* \param[in] firstBlock The address of the first block in the range.
* \param[in] lastBlock The address of the last block in the range.
*
* \note This function requests the SD card to do a flash erase for a
* range of blocks. The data on the card after an erase operation is
* either 0 or 1, depends on the card vendor. The card must support
* single block erase.
*
* \return true for success, false for failure.
*/
bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
csd_t csd;
if (!readCSD(&csd)) goto FAIL;
// check for single block erase
if (!csd.v1.erase_blk_en) {
// erase size mask
uint8_t m = (csd.v1.sector_size_high << 1) | csd.v1.sector_size_low;
if ((firstBlock & m) != 0 || ((lastBlock + 1) & m) != 0) {
// error card can't erase specified area
error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK);
goto FAIL;
}
}
if (type_ != SD_CARD_TYPE_SDHC) {
firstBlock <<= 9;
lastBlock <<= 9;
}
if (cardCommand(CMD32, firstBlock)
|| cardCommand(CMD33, lastBlock)
|| cardCommand(CMD38, 0)) {
error(SD_CARD_ERROR_ERASE);
goto FAIL;
}
if (!waitNotBusy(SD_ERASE_TIMEOUT)) {
error(SD_CARD_ERROR_ERASE_TIMEOUT);
goto FAIL;
}
chipSelectHigh();
return true;
FAIL:
chipSelectHigh();
return false;
}
/**
* Determine if card supports single block erase.
*
* \return true if single block erase is supported.
* false if single block erase is not supported.
*/
bool Sd2Card::eraseSingleBlockEnable() {
csd_t csd;
return readCSD(&csd) ? csd.v1.erase_blk_en : false;
}
/**
* Initialize an SD flash memory card.
*
* \param[in] sckRateID SPI clock rate selector. See setSckRate().
* \param[in] chipSelectPin SD chip select pin number.
*
* \return true for success, false for failure.
* The reason for failure can be determined by calling errorCode() and errorData().
*/
bool Sd2Card::init(uint8_t sckRateID, pin_t chipSelectPin) {
errorCode_ = type_ = 0;
chipSelectPin_ = chipSelectPin;
// 16-bit init start time allows over a minute
uint16_t t0 = (uint16_t)millis();
uint32_t arg;
// If init takes more than 4s it could trigger
// watchdog leading to a reboot loop.
#if ENABLED(USE_WATCHDOG)
watchdog_reset();
#endif
// set pin modes
pinMode(chipSelectPin_, OUTPUT);
chipSelectHigh();
SET_INPUT(SPI_MISO_PIN);
SET_OUTPUT(SPI_MOSI_PIN);
SET_OUTPUT(SPI_SCK_PIN);
#if DISABLED(SOFTWARE_SPI)
// SS must be in output mode even it is not chip select
SET_OUTPUT(SS_PIN);
// set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH);
#endif // SET_SPI_SS_HIGH
// set SCK rate for initialization commands
spiRate_ = SPI_SD_INIT_RATE;
spiInit(spiRate_);
#endif // SOFTWARE_SPI
// must supply min of 74 clock cycles with CS high.
for (uint8_t i = 0; i < 10; i++) spiSend(0xFF);
// command to go idle in SPI mode
while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) {
if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) {
error(SD_CARD_ERROR_CMD0);
goto FAIL;
}
}
// check SD version
if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) {
type(SD_CARD_TYPE_SD1);
}
else {
// only need last byte of r7 response
for (uint8_t i = 0; i < 4; i++) status_ = spiRec();
if (status_ != 0xAA) {
error(SD_CARD_ERROR_CMD8);
goto FAIL;
}
type(SD_CARD_TYPE_SD2);
}
// initialize card and send host supports SDHC if SD2
arg = type() == SD_CARD_TYPE_SD2 ? 0x40000000 : 0;
while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) {
// check for timeout
if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) {
error(SD_CARD_ERROR_ACMD41);
goto FAIL;
}
}
// if SD2 read OCR register to check for SDHC card
if (type() == SD_CARD_TYPE_SD2) {
if (cardCommand(CMD58, 0)) {
error(SD_CARD_ERROR_CMD58);
goto FAIL;
}
if ((spiRec() & 0xC0) == 0xC0) type(SD_CARD_TYPE_SDHC);
// discard rest of ocr - contains allowed voltage range
for (uint8_t i = 0; i < 3; i++) spiRec();
}
chipSelectHigh();
#if DISABLED(SOFTWARE_SPI)
return setSckRate(sckRateID);
#else // SOFTWARE_SPI
UNUSED(sckRateID);
return true;
#endif // SOFTWARE_SPI
FAIL:
chipSelectHigh();
return false;
}
/**
* Read a 512 byte block from an SD card.
*
* \param[in] blockNumber Logical block to be read.
* \param[out] dst Pointer to the location that will receive the data.
* \return true for success, false for failure.
*/
bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
// use address if not SDHC card
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
#if ENABLED(SD_CHECK_AND_RETRY)
uint8_t retryCnt = 3;
for (;;) {
if (cardCommand(CMD17, blockNumber))
error(SD_CARD_ERROR_CMD17);
else if (readData(dst, 512))
return true;
chipSelectHigh();
if (!--retryCnt) break;
cardCommand(CMD12, 0); // Try sending a stop command, ignore the result.
errorCode_ = 0;
}
return false;
#else
if (cardCommand(CMD17, blockNumber)) {
error(SD_CARD_ERROR_CMD17);
chipSelectHigh();
return false;
}
else
return readData(dst, 512);
#endif
}
/**
* Read one data block in a multiple block read sequence
*
* \param[in] dst Pointer to the location for the data to be read.
*
* \return true for success, false for failure.
*/
bool Sd2Card::readData(uint8_t* dst) {
chipSelectLow();
return readData(dst, 512);
}
#if ENABLED(SD_CHECK_AND_RETRY)
static const uint16_t crctab[] PROGMEM = {
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
};
static uint16_t CRC_CCITT(const uint8_t* data, size_t n) {
uint16_t crc = 0;
for (size_t i = 0; i < n; i++) {
crc = pgm_read_word(&crctab[(crc >> 8 ^ data[i]) & 0xFF]) ^ (crc << 8);
}
return crc;
}
#endif // SD_CHECK_AND_RETRY
bool Sd2Card::readData(uint8_t* dst, uint16_t count) {
// wait for start block token
uint16_t t0 = millis();
while ((status_ = spiRec()) == 0XFF) {
if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) {
error(SD_CARD_ERROR_READ_TIMEOUT);
goto FAIL;
}
}
if (status_ != DATA_START_BLOCK) {
error(SD_CARD_ERROR_READ);
goto FAIL;
}
// transfer data
spiRead(dst, count);
#if ENABLED(SD_CHECK_AND_RETRY)
{
uint16_t calcCrc = CRC_CCITT(dst, count);
uint16_t recvCrc = spiRec() << 8;
recvCrc |= spiRec();
if (calcCrc != recvCrc) {
error(SD_CARD_ERROR_CRC);
goto FAIL;
}
}
#else
// discard CRC
spiRec();
spiRec();
#endif
chipSelectHigh();
// Send an additional dummy byte, required by Toshiba Flash Air SD Card
spiSend(0XFF);
return true;
FAIL:
chipSelectHigh();
// Send an additional dummy byte, required by Toshiba Flash Air SD Card
spiSend(0XFF);
return false;
}
/** read CID or CSR register */
bool Sd2Card::readRegister(uint8_t cmd, void* buf) {
uint8_t* dst = reinterpret_cast<uint8_t*>(buf);
if (cardCommand(cmd, 0)) {
error(SD_CARD_ERROR_READ_REG);
chipSelectHigh();
return false;
}
return readData(dst, 16);
}
/**
* Start a read multiple blocks sequence.
*
* \param[in] blockNumber Address of first block in sequence.
*
* \note This function is used with readData() and readStop() for optimized
* multiple block reads. SPI chipSelect must be low for the entire sequence.
*
* \return true for success, false for failure.
*/
bool Sd2Card::readStart(uint32_t blockNumber) {
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
if (cardCommand(CMD18, blockNumber)) {
error(SD_CARD_ERROR_CMD18);
chipSelectHigh();
return false;
}
chipSelectHigh();
return true;
}
/**
* End a read multiple blocks sequence.
*
* \return true for success, false for failure.
*/
bool Sd2Card::readStop() {
chipSelectLow();
if (cardCommand(CMD12, 0)) {
error(SD_CARD_ERROR_CMD12);
chipSelectHigh();
return false;
}
chipSelectHigh();
return true;
}
/**
* Set the SPI clock rate.
*
* \param[in] sckRateID A value in the range [0, 6].
*
* The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum
* SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128
* for \a scsRateID = 6.
*
* \return The value one, true, is returned for success and the value zero,
* false, is returned for an invalid value of \a sckRateID.
*/
bool Sd2Card::setSckRate(uint8_t sckRateID) {
if (sckRateID > 6) {
error(SD_CARD_ERROR_SCK_RATE);
return false;
}
spiRate_ = sckRateID;
return true;
}
// wait for card to go not busy
bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) {
uint16_t t0 = millis();
while (spiRec() != 0XFF)
if (((uint16_t)millis() - t0) >= timeoutMillis) return false;
return true;
}
/**
* Writes a 512 byte block to an SD card.
*
* \param[in] blockNumber Logical block to be written.
* \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure.
*/
bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
// use address if not SDHC card
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
if (cardCommand(CMD24, blockNumber)) {
error(SD_CARD_ERROR_CMD24);
goto FAIL;
}
if (!writeData(DATA_START_BLOCK, src)) goto FAIL;
// wait for flash programming to complete
if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
error(SD_CARD_ERROR_WRITE_TIMEOUT);
goto FAIL;
}
// response is r2 so get and check two bytes for nonzero
if (cardCommand(CMD13, 0) || spiRec()) {
error(SD_CARD_ERROR_WRITE_PROGRAMMING);
goto FAIL;
}
chipSelectHigh();
return true;
FAIL:
chipSelectHigh();
return false;
}
/**
* Write one data block in a multiple block write sequence
* \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure.
*/
bool Sd2Card::writeData(const uint8_t* src) {
chipSelectLow();
// wait for previous write to finish
if (!waitNotBusy(SD_WRITE_TIMEOUT) || !writeData(WRITE_MULTIPLE_TOKEN, src)) {
error(SD_CARD_ERROR_WRITE_MULTIPLE);
chipSelectHigh();
return false;
}
chipSelectHigh();
return true;
}
// send one block of data for write block or write multiple blocks
bool Sd2Card::writeData(uint8_t token, const uint8_t* src) {
spiSendBlock(token, src);
spiSend(0xFF); // dummy crc
spiSend(0xFF); // dummy crc
status_ = spiRec();
if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) {
error(SD_CARD_ERROR_WRITE);
chipSelectHigh();
return false;
}
return true;
}
/**
* Start a write multiple blocks sequence.
*
* \param[in] blockNumber Address of first block in sequence.
* \param[in] eraseCount The number of blocks to be pre-erased.
*
* \note This function is used with writeData() and writeStop()
* for optimized multiple block writes.
*
* \return true for success, false for failure.
*/
bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) {
// send pre-erase count
if (cardAcmd(ACMD23, eraseCount)) {
error(SD_CARD_ERROR_ACMD23);
goto FAIL;
}
// use address if not SDHC card
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
if (cardCommand(CMD25, blockNumber)) {
error(SD_CARD_ERROR_CMD25);
goto FAIL;
}
chipSelectHigh();
return true;
FAIL:
chipSelectHigh();
return false;
}
/**
* End a write multiple blocks sequence.
*
* \return true for success, false for failure.
*/
bool Sd2Card::writeStop() {
chipSelectLow();
if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
spiSend(STOP_TRAN_TOKEN);
if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
chipSelectHigh();
return true;
FAIL:
error(SD_CARD_ERROR_STOP_TRAN);
chipSelectHigh();
return false;
}
#endif // SDSUPPORT

204
Marlin/Sd2Card.h Normal file
View file

@ -0,0 +1,204 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* \file
* \brief Sd2Card class for V2 SD/SDHC cards
*/
/**
* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SD2CARD_H_
#define _SD2CARD_H_
#include "SdFatConfig.h"
#include "SdInfo.h"
// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
uint8_t const SPI_FULL_SPEED = 0, // Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate().
SPI_HALF_SPEED = 1, // Set SCK rate to F_CPU/4. See Sd2Card::setSckRate().
SPI_QUARTER_SPEED = 2, // Set SCK rate to F_CPU/8. See Sd2Card::setSckRate().
SPI_EIGHTH_SPEED = 3, // Set SCK rate to F_CPU/16. See Sd2Card::setSckRate().
SPI_SIXTEENTH_SPEED = 4; // Set SCK rate to F_CPU/32. See Sd2Card::setSckRate().
uint16_t const SD_INIT_TIMEOUT = 2000, // init timeout ms
SD_ERASE_TIMEOUT = 10000, // erase timeout ms
SD_READ_TIMEOUT = 300, // read timeout ms
SD_WRITE_TIMEOUT = 600; // write time out ms
// SD card errors
uint8_t const SD_CARD_ERROR_CMD0 = 0X1, // timeout error for command CMD0 (initialize card in SPI mode)
SD_CARD_ERROR_CMD8 = 0X2, // CMD8 was not accepted - not a valid SD card
SD_CARD_ERROR_CMD12 = 0X3, // card returned an error response for CMD12 (write stop)
SD_CARD_ERROR_CMD17 = 0X4, // card returned an error response for CMD17 (read block)
SD_CARD_ERROR_CMD18 = 0X5, // card returned an error response for CMD18 (read multiple block)
SD_CARD_ERROR_CMD24 = 0X6, // card returned an error response for CMD24 (write block)
SD_CARD_ERROR_CMD25 = 0X7, // WRITE_MULTIPLE_BLOCKS command failed
SD_CARD_ERROR_CMD58 = 0X8, // card returned an error response for CMD58 (read OCR)
SD_CARD_ERROR_ACMD23 = 0X9, // SET_WR_BLK_ERASE_COUNT failed
SD_CARD_ERROR_ACMD41 = 0XA, // ACMD41 initialization process timeout
SD_CARD_ERROR_BAD_CSD = 0XB, // card returned a bad CSR version field
SD_CARD_ERROR_ERASE = 0XC, // erase block group command failed
SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD, // card not capable of single block erase
SD_CARD_ERROR_ERASE_TIMEOUT = 0XE, // Erase sequence timed out
SD_CARD_ERROR_READ = 0XF, // card returned an error token instead of read data
SD_CARD_ERROR_READ_REG = 0x10, // read CID or CSD failed
SD_CARD_ERROR_READ_TIMEOUT = 0x11, // timeout while waiting for start of read data
SD_CARD_ERROR_STOP_TRAN = 0x12, // card did not accept STOP_TRAN_TOKEN
SD_CARD_ERROR_WRITE = 0x13, // card returned an error token as a response to a write operation
SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14, // REMOVE - not used ... attempt to write protected block zero
SD_CARD_ERROR_WRITE_MULTIPLE = 0x15, // card did not go ready for a multiple block write
SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16, // card returned an error to a CMD13 status check after a write
SD_CARD_ERROR_WRITE_TIMEOUT = 0x17, // timeout occurred during write programming
SD_CARD_ERROR_SCK_RATE = 0x18, // incorrect rate selected
SD_CARD_ERROR_INIT_NOT_CALLED = 0x19, // init() not called
SD_CARD_ERROR_CRC = 0x20; // crc check error
// card types
uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card
SD_CARD_TYPE_SD2 = 2, // Standard capacity V2 SD card
SD_CARD_TYPE_SDHC = 3; // High Capacity SD card
/**
* define SOFTWARE_SPI to use bit-bang SPI
*/
#if MEGA_SOFT_SPI
#define SOFTWARE_SPI
#elif USE_SOFTWARE_SPI
#define SOFTWARE_SPI
#endif
// SPI pin definitions - do not edit here - change in SdFatConfig.h
#if DISABLED(SOFTWARE_SPI)
// hardware pin defs
#define SD_CHIP_SELECT_PIN SS_PIN // The default chip select pin for the SD card is SS.
// The following three pins must not be redefined for hardware SPI.
#define SPI_MOSI_PIN MOSI_PIN // SPI Master Out Slave In pin
#define SPI_MISO_PIN MISO_PIN // SPI Master In Slave Out pin
#define SPI_SCK_PIN SCK_PIN // SPI Clock pin
#else // SOFTWARE_SPI
#define SD_CHIP_SELECT_PIN SOFT_SPI_CS_PIN // SPI chip select pin
#define SPI_MOSI_PIN SOFT_SPI_MOSI_PIN // SPI Master Out Slave In pin
#define SPI_MISO_PIN SOFT_SPI_MISO_PIN // SPI Master In Slave Out pin
#define SPI_SCK_PIN SOFT_SPI_SCK_PIN // SPI Clock pin
#endif // SOFTWARE_SPI
/**
* \class Sd2Card
* \brief Raw access to SD and SDHC flash memory cards.
*/
class Sd2Card {
public:
Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
uint32_t cardSize();
bool erase(uint32_t firstBlock, uint32_t lastBlock);
bool eraseSingleBlockEnable();
/**
* Set SD error code.
* \param[in] code value for error code.
*/
void error(uint8_t code) {errorCode_ = code;}
/**
* \return error code for last error. See Sd2Card.h for a list of error codes.
*/
int errorCode() const {return errorCode_;}
/** \return error data for last error. */
int errorData() const {return status_;}
/**
* Initialize an SD flash memory card with default clock rate and chip
* select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
*
* \return true for success or false for failure.
*/
bool init(uint8_t sckRateID = SPI_FULL_SPEED,
pin_t chipSelectPin = SD_CHIP_SELECT_PIN);
bool readBlock(uint32_t block, uint8_t* dst);
/**
* Read a card's CID register. The CID contains card identification
* information such as Manufacturer ID, Product name, Product serial
* number and Manufacturing date.
*
* \param[out] cid pointer to area for returned data.
*
* \return true for success or false for failure.
*/
bool readCID(cid_t* cid) { return readRegister(CMD10, cid); }
/**
* Read a card's CSD register. The CSD contains Card-Specific Data that
* provides information regarding access to the card's contents.
*
* \param[out] csd pointer to area for returned data.
*
* \return true for success or false for failure.
*/
bool readCSD(csd_t* csd) { return readRegister(CMD9, csd); }
bool readData(uint8_t* dst);
bool readStart(uint32_t blockNumber);
bool readStop();
bool setSckRate(uint8_t sckRateID);
/**
* Return the card type: SD V1, SD V2 or SDHC
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
*/
int type() const {return type_;}
bool writeBlock(uint32_t blockNumber, const uint8_t* src);
bool writeData(const uint8_t* src);
bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
bool writeStop();
private:
uint8_t chipSelectPin_,
errorCode_,
spiRate_,
status_,
type_;
// private functions
uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
cardCommand(CMD55, 0);
return cardCommand(cmd, arg);
}
uint8_t cardCommand(uint8_t cmd, uint32_t arg);
bool readData(uint8_t* dst, uint16_t count);
bool readRegister(uint8_t cmd, void* buf);
void chipSelectHigh();
void chipSelectLow();
void type(uint8_t value) { type_ = value; }
bool waitNotBusy(uint16_t timeoutMillis);
bool writeData(uint8_t token, const uint8_t* src);
};
#endif // _SD2CARD_H_

1728
Marlin/SdBaseFile.cpp Normal file
View file

File diff suppressed because it is too large Load diff

390
Marlin/SdBaseFile.h Normal file
View file

@ -0,0 +1,390 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* \file
* \brief SdBaseFile class
*/
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SDBASEFILE_H_
#define _SDBASEFILE_H_
#include "SdFatConfig.h"
#include "SdVolume.h"
#include <stdint.h>
/**
* \struct filepos_t
* \brief internal type for istream
* do not use in user apps
*/
struct filepos_t {
uint32_t position; // stream byte position
uint32_t cluster; // cluster of position
filepos_t() : position(0), cluster(0) {}
};
// use the gnu style oflag in open()
uint8_t const O_READ = 0x01, // open() oflag for reading
O_RDONLY = O_READ, // open() oflag - same as O_IN
O_WRITE = 0x02, // open() oflag for write
O_WRONLY = O_WRITE, // open() oflag - same as O_WRITE
O_RDWR = (O_READ | O_WRITE), // open() oflag for reading and writing
O_ACCMODE = (O_READ | O_WRITE), // open() oflag mask for access modes
O_APPEND = 0x04, // The file offset shall be set to the end of the file prior to each write.
O_SYNC = 0x08, // Synchronous writes - call sync() after each write
O_TRUNC = 0x10, // Truncate the file to zero length
O_AT_END = 0x20, // Set the initial position at the end of the file
O_CREAT = 0x40, // Create the file if nonexistent
O_EXCL = 0x80; // If O_CREAT and O_EXCL are set, open() shall fail if the file exists
// SdBaseFile class static and const definitions
// flags for ls()
uint8_t const LS_DATE = 1, // ls() flag to print modify date
LS_SIZE = 2, // ls() flag to print file size
LS_R = 4; // ls() flag for recursive list of subdirectories
// flags for timestamp
uint8_t const T_ACCESS = 1, // Set the file's last access date
T_CREATE = 2, // Set the file's creation date and time
T_WRITE = 4; // Set the file's write date and time
// values for type_
uint8_t const FAT_FILE_TYPE_CLOSED = 0, // This file has not been opened.
FAT_FILE_TYPE_NORMAL = 1, // A normal file
FAT_FILE_TYPE_ROOT_FIXED = 2, // A FAT12 or FAT16 root directory
FAT_FILE_TYPE_ROOT32 = 3, // A FAT32 root directory
FAT_FILE_TYPE_SUBDIR = 4, // A subdirectory file
FAT_FILE_TYPE_MIN_DIR = FAT_FILE_TYPE_ROOT_FIXED; // Test value for directory type
/**
* date field for FAT directory entry
* \param[in] year [1980,2107]
* \param[in] month [1,12]
* \param[in] day [1,31]
*
* \return Packed date for dir_t entry.
*/
static inline uint16_t FAT_DATE(uint16_t year, uint8_t month, uint8_t day) { return (year - 1980) << 9 | month << 5 | day; }
/**
* year part of FAT directory date field
* \param[in] fatDate Date in packed dir format.
*
* \return Extracted year [1980,2107]
*/
static inline uint16_t FAT_YEAR(uint16_t fatDate) { return 1980 + (fatDate >> 9); }
/**
* month part of FAT directory date field
* \param[in] fatDate Date in packed dir format.
*
* \return Extracted month [1,12]
*/
static inline uint8_t FAT_MONTH(uint16_t fatDate) { return (fatDate >> 5) & 0XF; }
/**
* day part of FAT directory date field
* \param[in] fatDate Date in packed dir format.
*
* \return Extracted day [1,31]
*/
static inline uint8_t FAT_DAY(uint16_t fatDate) { return fatDate & 0x1F; }
/**
* time field for FAT directory entry
* \param[in] hour [0,23]
* \param[in] minute [0,59]
* \param[in] second [0,59]
*
* \return Packed time for dir_t entry.
*/
static inline uint16_t FAT_TIME(uint8_t hour, uint8_t minute, uint8_t second) { return hour << 11 | minute << 5 | second >> 1; }
/**
* hour part of FAT directory time field
* \param[in] fatTime Time in packed dir format.
*
* \return Extracted hour [0,23]
*/
static inline uint8_t FAT_HOUR(uint16_t fatTime) { return fatTime >> 11; }
/**
* minute part of FAT directory time field
* \param[in] fatTime Time in packed dir format.
*
* \return Extracted minute [0,59]
*/
static inline uint8_t FAT_MINUTE(uint16_t fatTime) { return (fatTime >> 5) & 0x3F; }
/**
* second part of FAT directory time field
* Note second/2 is stored in packed time.
*
* \param[in] fatTime Time in packed dir format.
*
* \return Extracted second [0,58]
*/
static inline uint8_t FAT_SECOND(uint16_t fatTime) { return 2 * (fatTime & 0x1F); }
// Default date for file timestamps is 1 Jan 2000
uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;
// Default time for file timestamp is 1 am
uint16_t const FAT_DEFAULT_TIME = (1 << 11);
/**
* \class SdBaseFile
* \brief Base class for SdFile with Print and C++ streams.
*/
class SdBaseFile {
public:
SdBaseFile() : writeError(false), type_(FAT_FILE_TYPE_CLOSED) {}
SdBaseFile(const char* path, uint8_t oflag);
~SdBaseFile() { if (isOpen()) close(); }
/**
* writeError is set to true if an error occurs during a write().
* Set writeError to false before calling print() and/or write() and check
* for true after calls to print() and/or write().
*/
bool writeError;
// helpers for stream classes
/**
* get position for streams
* \param[out] pos struct to receive position
*/
void getpos(filepos_t* pos);
/**
* set position for streams
* \param[out] pos struct with value for new position
*/
void setpos(filepos_t* pos);
bool close();
bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
bool createContiguous(SdBaseFile* dirFile,
const char* path, uint32_t size);
/**
* \return The current cluster number for a file or directory.
*/
uint32_t curCluster() const { return curCluster_; }
/**
* \return The current position for a file or directory.
*/
uint32_t curPosition() const { return curPosition_; }
/**
* \return Current working directory
*/
static SdBaseFile* cwd() { return cwd_; }
/**
* Set the date/time callback function
*
* \param[in] dateTime The user's call back function. The callback
* function is of the form:
*
* \code
* void dateTime(uint16_t* date, uint16_t* time) {
* uint16_t year;
* uint8_t month, day, hour, minute, second;
*
* // User gets date and time from GPS or real-time clock here
*
* // return date using FAT_DATE macro to format fields
* *date = FAT_DATE(year, month, day);
*
* // return time using FAT_TIME macro to format fields
* *time = FAT_TIME(hour, minute, second);
* }
* \endcode
*
* Sets the function that is called when a file is created or when
* a file's directory entry is modified by sync(). All timestamps,
* access, creation, and modify, are set when a file is created.
* sync() maintains the last access date and last modify date/time.
*
* See the timestamp() function.
*/
static void dateTimeCallback(
void (*dateTime)(uint16_t* date, uint16_t* time)) {
dateTime_ = dateTime;
}
/**
* Cancel the date/time callback function.
*/
static void dateTimeCallbackCancel() { dateTime_ = 0; }
bool dirEntry(dir_t* dir);
static void dirName(const dir_t& dir, char* name);
bool exists(const char* name);
int16_t fgets(char* str, int16_t num, char* delim = 0);
/**
* \return The total number of bytes in a file or directory.
*/
uint32_t fileSize() const { return fileSize_; }
/**
* \return The first cluster number for a file or directory.
*/
uint32_t firstCluster() const { return firstCluster_; }
/**
* \return True if this is a directory else false.
*/
bool isDir() const { return type_ >= FAT_FILE_TYPE_MIN_DIR; }
/**
* \return True if this is a normal file else false.
*/
bool isFile() const { return type_ == FAT_FILE_TYPE_NORMAL; }
/**
* \return True if this is an open file/directory else false.
*/
bool isOpen() const { return type_ != FAT_FILE_TYPE_CLOSED; }
/**
* \return True if this is a subdirectory else false.
*/
bool isSubDir() const { return type_ == FAT_FILE_TYPE_SUBDIR; }
/**
* \return True if this is the root directory.
*/
bool isRoot() const { return type_ == FAT_FILE_TYPE_ROOT_FIXED || type_ == FAT_FILE_TYPE_ROOT32; }
bool getFilename(char * const name);
void ls(uint8_t flags = 0, uint8_t indent = 0);
bool mkdir(SdBaseFile* dir, const char* path, bool pFlag = true);
bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag);
bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag);
bool open(const char* path, uint8_t oflag = O_READ);
bool openNext(SdBaseFile* dirFile, uint8_t oflag);
bool openRoot(SdVolume* vol);
int peek();
static void printFatDate(uint16_t fatDate);
static void printFatTime(uint16_t fatTime);
bool printName();
int16_t read();
int16_t read(void* buf, uint16_t nbyte);
int8_t readDir(dir_t* dir, char* longFilename);
static bool remove(SdBaseFile* dirFile, const char* path);
bool remove();
/**
* Set the file's current position to zero.
*/
void rewind() { seekSet(0); }
bool rename(SdBaseFile* dirFile, const char* newPath);
bool rmdir();
bool rmRfStar();
/**
* Set the files position to current position + \a pos. See seekSet().
* \param[in] offset The new position in bytes from the current position.
* \return true for success or false for failure.
*/
bool seekCur(const int32_t offset) { return seekSet(curPosition_ + offset); }
/**
* Set the files position to end-of-file + \a offset. See seekSet().
* \param[in] offset The new position in bytes from end-of-file.
* \return true for success or false for failure.
*/
bool seekEnd(const int32_t offset = 0) { return seekSet(fileSize_ + offset); }
bool seekSet(const uint32_t pos);
bool sync();
bool timestamp(SdBaseFile* file);
bool timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day,
uint8_t hour, uint8_t minute, uint8_t second);
/**
* Type of file. Use isFile() or isDir() instead of type() if possible.
*
* \return The file or directory type.
*/
uint8_t type() const { return type_; }
bool truncate(uint32_t size);
/**
* \return SdVolume that contains this file.
*/
SdVolume* volume() const { return vol_; }
int16_t write(const void* buf, uint16_t nbyte);
private:
friend class SdFat; // allow SdFat to set cwd_
static SdBaseFile* cwd_; // global pointer to cwd dir
// data time callback function
static void (*dateTime_)(uint16_t* date, uint16_t* time);
// bits defined in flags_
static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC), // should be 0x0F
F_FILE_DIR_DIRTY = 0x80; // sync of directory entry required
// private data
uint8_t flags_; // See above for definition of flags_ bits
uint8_t fstate_; // error and eof indicator
uint8_t type_; // type of file see above for values
uint32_t curCluster_; // cluster for current file position
uint32_t curPosition_; // current file position in bytes from beginning
uint32_t dirBlock_; // block for this files directory entry
uint8_t dirIndex_; // index of directory entry in dirBlock
uint32_t fileSize_; // file size in bytes
uint32_t firstCluster_; // first cluster of file
SdVolume* vol_; // volume where file is located
/**
* EXPERIMENTAL - Don't use!
*/
//bool openParent(SdBaseFile* dir);
// private functions
bool addCluster();
bool addDirCluster();
dir_t* cacheDirEntry(uint8_t action);
int8_t lsPrintNext(uint8_t flags, uint8_t indent);
static bool make83Name(const char* str, uint8_t* name, const char** ptr);
bool mkdir(SdBaseFile* parent, const uint8_t dname[11]);
bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag);
bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
dir_t* readDirCache();
};
#endif // _SDBASEFILE_H_

116
Marlin/SdFatConfig.h Normal file
View file

@ -0,0 +1,116 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* SdFatConfig.h
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SDFATCONFIG_H_
#define _SDFATCONFIG_H_
#include "MarlinConfig.h"
/**
* To use multiple SD cards set USE_MULTIPLE_CARDS nonzero.
*
* Using multiple cards costs 400 - 500 bytes of flash.
*
* Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
*/
#define USE_MULTIPLE_CARDS 0
/**
* Call flush for endl if ENDL_CALLS_FLUSH is nonzero
*
* The standard for iostreams is to call flush. This is very costly for
* SdFat. Each call to flush causes 2048 bytes of I/O to the SD.
*
* SdFat has a single 512 byte buffer for SD I/O so it must write the current
* data block to the SD, read the directory block from the SD, update the
* directory entry, write the directory block to the SD and read the data
* block back into the buffer.
*
* The SD flash memory controller is not designed for this many rewrites
* so performance may be reduced by more than a factor of 100.
*
* If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force
* all data to be written to the SD.
*/
#define ENDL_CALLS_FLUSH 0
/**
* Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
* FAT12 has not been well tested.
*/
#define FAT12_SUPPORT 0
/**
* SPI init rate for SD initialization commands. Must be 5 (F_CPU/64)
* or 6 (F_CPU/128).
*/
#define SPI_SD_INIT_RATE 5
/**
* Set the SS pin high for hardware SPI. If SS is chip select for another SPI
* device this will disable that device during the SD init phase.
*/
#define SET_SPI_SS_HIGH 1
/**
* Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos.
* Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
*
* MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used
* on Mega Arduinos. Software SPI works well with GPS Shield V1.1
* but many SD cards will fail with GPS Shield V1.0.
*/
#define MEGA_SOFT_SPI 0
// Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
#define USE_SOFTWARE_SPI 0
// Define software SPI pins so Mega can use unmodified 168/328 shields
#define SOFT_SPI_CS_PIN 10 // Software SPI chip select pin for the SD
#define SOFT_SPI_MOSI_PIN 11 // Software SPI Master Out Slave In pin
#define SOFT_SPI_MISO_PIN 12 // Software SPI Master In Slave Out pin
#define SOFT_SPI_SCK_PIN 13 // Software SPI Clock pin
/**
* The __cxa_pure_virtual function is an error handler that is invoked when
* a pure virtual function is called.
*/
#define USE_CXA_PURE_VIRTUAL 1
/**
* Defines for 8.3 and long (vfat) filenames
*/
#define FILENAME_LENGTH 13 // Number of UTF-16 characters per entry
// Total bytes needed to store a single long filename
#define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1)
#endif // _SDFATCONFIG_H_

615
Marlin/SdFatStructs.h Normal file
View file

@ -0,0 +1,615 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* \file
* \brief FAT file structures
*/
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef SDFATSTRUCTS_H
#define SDFATSTRUCTS_H
#define PACKED __attribute__((__packed__))
/**
* mostly from Microsoft document fatgen103.doc
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
*/
uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR
BOOTSIG1 = 0xAA, // Value for byte 511 of boot block or MBR
EXTENDED_BOOT_SIG = 0x29; // Value for bootSignature field int FAT/FAT32 boot sector
/**
* \struct partitionTable
* \brief MBR partition table entry
*
* A partition table entry for a MBR formatted storage device.
* The MBR partition table has four entries.
*/
struct partitionTable {
/**
* Boot Indicator . Indicates whether the volume is the active
* partition. Legal values include: 0x00. Do not use for booting.
* 0x80 Active partition.
*/
uint8_t boot;
/**
* Head part of Cylinder-head-sector address of the first block in
* the partition. Legal values are 0-255. Only used in old PC BIOS.
*/
uint8_t beginHead;
/**
* Sector part of Cylinder-head-sector address of the first block in
* the partition. Legal values are 1-63. Only used in old PC BIOS.
*/
unsigned beginSector : 6;
/** High bits cylinder for first block in partition. */
unsigned beginCylinderHigh : 2;
/**
* Combine beginCylinderLow with beginCylinderHigh. Legal values
* are 0-1023. Only used in old PC BIOS.
*/
uint8_t beginCylinderLow;
/**
* Partition type. See defines that begin with PART_TYPE_ for
* some Microsoft partition types.
*/
uint8_t type;
/**
* head part of cylinder-head-sector address of the last sector in the
* partition. Legal values are 0-255. Only used in old PC BIOS.
*/
uint8_t endHead;
/**
* Sector part of cylinder-head-sector address of the last sector in
* the partition. Legal values are 1-63. Only used in old PC BIOS.
*/
unsigned endSector : 6;
/** High bits of end cylinder */
unsigned endCylinderHigh : 2;
/**
* Combine endCylinderLow with endCylinderHigh. Legal values
* are 0-1023. Only used in old PC BIOS.
*/
uint8_t endCylinderLow;
uint32_t firstSector; // Logical block address of the first block in the partition.
uint32_t totalSectors; // Length of the partition, in blocks.
} PACKED;
typedef struct partitionTable part_t; // Type name for partitionTable
/**
* \struct masterBootRecord
*
* \brief Master Boot Record
*
* The first block of a storage device that is formatted with a MBR.
*/
struct masterBootRecord {
uint8_t codeArea[440]; // Code Area for master boot program.
uint32_t diskSignature; // Optional Windows NT disk signature. May contain boot code.
uint16_t usuallyZero; // Usually zero but may be more boot code.
part_t part[4]; // Partition tables.
uint8_t mbrSig0; // First MBR signature byte. Must be 0x55
uint8_t mbrSig1; // Second MBR signature byte. Must be 0xAA
} PACKED;
/** Type name for masterBootRecord */
typedef struct masterBootRecord mbr_t;
/**
* \struct fat_boot
*
* \brief Boot sector for a FAT12/FAT16 volume.
*
*/
struct fat_boot {
/**
* The first three bytes of the boot sector must be valid,
* executable x 86-based CPU instructions. This includes a
* jump instruction that skips the next nonexecutable bytes.
*/
uint8_t jump[3];
/**
* This is typically a string of characters that identifies
* the operating system that formatted the volume.
*/
char oemId[8];
/**
* The size of a hardware sector. Valid decimal values for this
* field are 512, 1024, 2048, and 4096. For most disks used in
* the United States, the value of this field is 512.
*/
uint16_t bytesPerSector;
/**
* Number of sectors per allocation unit. This value must be a
* power of 2 that is greater than 0. The legal values are
* 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided.
*/
uint8_t sectorsPerCluster;
/**
* The number of sectors preceding the start of the first FAT,
* including the boot sector. The value of this field is always 1.
*/
uint16_t reservedSectorCount;
/**
* The number of copies of the FAT on the volume.
* The value of this field is always 2.
*/
uint8_t fatCount;
/**
* For FAT12 and FAT16 volumes, this field contains the count of
* 32-byte directory entries in the root directory. For FAT32 volumes,
* this field must be set to 0. For FAT12 and FAT16 volumes, this
* value should always specify a count that when multiplied by 32
* results in a multiple of bytesPerSector. FAT16 volumes should
* use the value 512.
*/
uint16_t rootDirEntryCount;
/**
* This field is the old 16-bit total count of sectors on the volume.
* This count includes the count of all sectors in all four regions
* of the volume. This field can be 0; if it is 0, then totalSectors32
* must be nonzero. For FAT32 volumes, this field must be 0. For
* FAT12 and FAT16 volumes, this field contains the sector count, and
* totalSectors32 is 0 if the total sector count fits
* (is less than 0x10000).
*/
uint16_t totalSectors16;
/**
* This dates back to the old MS-DOS 1.x media determination and is
* no longer usually used for anything. 0xF8 is the standard value
* for fixed (nonremovable) media. For removable media, 0xF0 is
* frequently used. Legal values are 0xF0 or 0xF8-0xFF.
*/
uint8_t mediaType;
/**
* Count of sectors occupied by one FAT on FAT12/FAT16 volumes.
* On FAT32 volumes this field must be 0, and sectorsPerFat32
* contains the FAT size count.
*/
uint16_t sectorsPerFat16;
uint16_t sectorsPerTrack; // Sectors per track for interrupt 0x13. Not used otherwise.
uint16_t headCount; // Number of heads for interrupt 0x13. Not used otherwise.
/**
* Count of hidden sectors preceding the partition that contains this
* FAT volume. This field is generally only relevant for media
* visible on interrupt 0x13.
*/
uint32_t hidddenSectors;
/**
* This field is the new 32-bit total count of sectors on the volume.
* This count includes the count of all sectors in all four regions
* of the volume. This field can be 0; if it is 0, then
* totalSectors16 must be nonzero.
*/
uint32_t totalSectors32;
/**
* Related to the BIOS physical drive number. Floppy drives are
* identified as 0x00 and physical hard disks are identified as
* 0x80, regardless of the number of physical disk drives.
* Typically, this value is set prior to issuing an INT 13h BIOS
* call to specify the device to access. The value is only
* relevant if the device is a boot device.
*/
uint8_t driveNumber;
uint8_t reserved1; // used by Windows NT - should be zero for FAT
uint8_t bootSignature; // 0x29 if next three fields are valid
/**
* A random serial number created when formatting a disk,
* which helps to distinguish between disks.
* Usually generated by combining date and time.
*/
uint32_t volumeSerialNumber;
/**
* A field once used to store the volume label. The volume label
* is now stored as a special file in the root directory.
*/
char volumeLabel[11];
/**
* A field with a value of either FAT, FAT12 or FAT16,
* depending on the disk format.
*/
char fileSystemType[8];
uint8_t bootCode[448]; // X86 boot code
uint8_t bootSectorSig0; // must be 0x55
uint8_t bootSectorSig1; // must be 0xAA
} PACKED;
typedef struct fat_boot fat_boot_t; // Type name for FAT Boot Sector
/**
* \struct fat32_boot
*
* \brief Boot sector for a FAT32 volume.
*/
struct fat32_boot {
/**
* The first three bytes of the boot sector must be valid,
* executable x 86-based CPU instructions. This includes a
* jump instruction that skips the next nonexecutable bytes.
*/
uint8_t jump[3];
/**
* This is typically a string of characters that identifies
* the operating system that formatted the volume.
*/
char oemId[8];
/**
* The size of a hardware sector. Valid decimal values for this
* field are 512, 1024, 2048, and 4096. For most disks used in
* the United States, the value of this field is 512.
*/
uint16_t bytesPerSector;
/**
* Number of sectors per allocation unit. This value must be a
* power of 2 that is greater than 0. The legal values are
* 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided.
*/
uint8_t sectorsPerCluster;
/**
* The number of sectors preceding the start of the first FAT,
* including the boot sector. Must not be zero
*/
uint16_t reservedSectorCount;
/**
* The number of copies of the FAT on the volume.
* The value of this field is always 2.
*/
uint8_t fatCount;
/**
* FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0.
*/
uint16_t rootDirEntryCount;
/**
* For FAT32 volumes, this field must be 0.
*/
uint16_t totalSectors16;
/**
* This dates back to the old MS-DOS 1.x media determination and is
* no longer usually used for anything. 0xF8 is the standard value
* for fixed (nonremovable) media. For removable media, 0xF0 is
* frequently used. Legal values are 0xF0 or 0xF8-0xFF.
*/
uint8_t mediaType;
/**
* On FAT32 volumes this field must be 0, and sectorsPerFat32
* contains the FAT size count.
*/
uint16_t sectorsPerFat16;
uint16_t sectorsPerTrack; // Sectors per track for interrupt 0x13. Not used otherwise.
uint16_t headCount; // Number of heads for interrupt 0x13. Not used otherwise.
/**
* Count of hidden sectors preceding the partition that contains this
* FAT volume. This field is generally only relevant for media
* visible on interrupt 0x13.
*/
uint32_t hidddenSectors;
/**
* Contains the total number of sectors in the FAT32 volume.
*/
uint32_t totalSectors32;
/**
* Count of sectors occupied by one FAT on FAT32 volumes.
*/
uint32_t sectorsPerFat32;
/**
* This field is only defined for FAT32 media and does not exist on
* FAT12 and FAT16 media.
* Bits 0-3 -- Zero-based number of active FAT.
* Only valid if mirroring is disabled.
* Bits 4-6 -- Reserved.
* Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs.
* -- 1 means only one FAT is active; it is the one referenced
* in bits 0-3.
* Bits 8-15 -- Reserved.
*/
uint16_t fat32Flags;
/**
* FAT32 version. High byte is major revision number.
* Low byte is minor revision number. Only 0.0 define.
*/
uint16_t fat32Version;
/**
* Cluster number of the first cluster of the root directory for FAT32.
* This usually 2 but not required to be 2.
*/
uint32_t fat32RootCluster;
/**
* Sector number of FSINFO structure in the reserved area of the
* FAT32 volume. Usually 1.
*/
uint16_t fat32FSInfo;
/**
* If nonzero, indicates the sector number in the reserved area
* of the volume of a copy of the boot record. Usually 6.
* No value other than 6 is recommended.
*/
uint16_t fat32BackBootBlock;
/**
* Reserved for future expansion. Code that formats FAT32 volumes
* should always set all of the bytes of this field to 0.
*/
uint8_t fat32Reserved[12];
/**
* Related to the BIOS physical drive number. Floppy drives are
* identified as 0x00 and physical hard disks are identified as
* 0x80, regardless of the number of physical disk drives.
* Typically, this value is set prior to issuing an INT 13h BIOS
* call to specify the device to access. The value is only
* relevant if the device is a boot device.
*/
uint8_t driveNumber;
uint8_t reserved1; // Used by Windows NT - should be zero for FAT
uint8_t bootSignature; // 0x29 if next three fields are valid
/**
* A random serial number created when formatting a disk,
* which helps to distinguish between disks.
* Usually generated by combining date and time.
*/
uint32_t volumeSerialNumber;
/**
* A field once used to store the volume label. The volume label
* is now stored as a special file in the root directory.
*/
char volumeLabel[11];
/**
* A text field with a value of FAT32.
*/
char fileSystemType[8];
uint8_t bootCode[420]; // X86 boot code
uint8_t bootSectorSig0; // must be 0x55
uint8_t bootSectorSig1; // must be 0xAA
} PACKED;
typedef struct fat32_boot fat32_boot_t; // Type name for FAT32 Boot Sector
uint32_t const FSINFO_LEAD_SIG = 0x41615252, // 'AaRR' Lead signature for a FSINFO sector
FSINFO_STRUCT_SIG = 0x61417272; // 'aArr' Struct signature for a FSINFO sector
/**
* \struct fat32_fsinfo
*
* \brief FSINFO sector for a FAT32 volume.
*
*/
struct fat32_fsinfo {
uint32_t leadSignature; // must be 0x52, 0x52, 0x61, 0x41 'RRaA'
uint8_t reserved1[480]; // must be zero
uint32_t structSignature; // must be 0x72, 0x72, 0x41, 0x61 'rrAa'
/**
* Contains the last known free cluster count on the volume.
* If the value is 0xFFFFFFFF, then the free count is unknown
* and must be computed. Any other value can be used, but is
* not necessarily correct. It should be range checked at least
* to make sure it is <= volume cluster count.
*/
uint32_t freeCount;
/**
* This is a hint for the FAT driver. It indicates the cluster
* number at which the driver should start looking for free clusters.
* If the value is 0xFFFFFFFF, then there is no hint and the driver
* should start looking at cluster 2.
*/
uint32_t nextFree;
uint8_t reserved2[12]; // must be zero
uint8_t tailSignature[4]; // must be 0x00, 0x00, 0x55, 0xAA
} PACKED;
typedef struct fat32_fsinfo fat32_fsinfo_t; // Type name for FAT32 FSINFO Sector
// End Of Chain values for FAT entries
uint16_t const FAT12EOC = 0xFFF, // FAT12 end of chain value used by Microsoft.
FAT12EOC_MIN = 0xFF8, // Minimum value for FAT12 EOC. Use to test for EOC.
FAT16EOC = 0xFFFF, // FAT16 end of chain value used by Microsoft.
FAT16EOC_MIN = 0xFFF8; // Minimum value for FAT16 EOC. Use to test for EOC.
uint32_t const FAT32EOC = 0x0FFFFFFF, // FAT32 end of chain value used by Microsoft.
FAT32EOC_MIN = 0x0FFFFFF8, // Minimum value for FAT32 EOC. Use to test for EOC.
FAT32MASK = 0x0FFFFFFF; // Mask a for FAT32 entry. Entries are 28 bits.
/**
* \struct directoryEntry
* \brief FAT short directory entry
*
* Short means short 8.3 name, not the entry size.
*
* Date Format. A FAT directory entry date stamp is a 16-bit field that is
* basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
* format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
* 16-bit word):
*
* Bits 9-15: Count of years from 1980, valid value range 0-127
* inclusive (1980-2107).
*
* Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
*
* Bits 0-4: Day of month, valid value range 1-31 inclusive.
*
* Time Format. A FAT directory entry time stamp is a 16-bit field that has
* a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
* 16-bit word, bit 15 is the MSB of the 16-bit word).
*
* Bits 11-15: Hours, valid value range 0-23 inclusive.
*
* Bits 5-10: Minutes, valid value range 0-59 inclusive.
*
* Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
*
* The valid time range is from Midnight 00:00:00 to 23:59:58.
*/
struct directoryEntry {
/**
* Short 8.3 name.
*
* The first eight bytes contain the file name with blank fill.
* The last three bytes contain the file extension with blank fill.
*/
uint8_t name[11];
/**
* Entry attributes.
*
* The upper two bits of the attribute byte are reserved and should
* always be set to 0 when a file is created and never modified or
* looked at after that. See defines that begin with DIR_ATT_.
*/
uint8_t attributes;
/**
* Reserved for use by Windows NT. Set value to 0 when a file is
* created and never modify or look at it after that.
*/
uint8_t reservedNT;
/**
* The granularity of the seconds part of creationTime is 2 seconds
* so this field is a count of tenths of a second and it's valid
* value range is 0-199 inclusive. (WHG note - seems to be hundredths)
*/
uint8_t creationTimeTenths;
uint16_t creationTime; // Time file was created.
uint16_t creationDate; // Date file was created.
/**
* Last access date. Note that there is no last access time, only
* a date. This is the date of last read or write. In the case of
* a write, this should be set to the same date as lastWriteDate.
*/
uint16_t lastAccessDate;
/**
* High word of this entry's first cluster number (always 0 for a
* FAT12 or FAT16 volume).
*/
uint16_t firstClusterHigh;
uint16_t lastWriteTime; // Time of last write. File creation is considered a write.
uint16_t lastWriteDate; // Date of last write. File creation is considered a write.
uint16_t firstClusterLow; // Low word of this entry's first cluster number.
uint32_t fileSize; // 32-bit unsigned holding this file's size in bytes.
} PACKED;
/**
* \struct directoryVFATEntry
* \brief VFAT long filename directory entry
*
* directoryVFATEntries are found in the same list as normal directoryEntry.
* But have the attribute field set to DIR_ATT_LONG_NAME.
*
* Long filenames are saved in multiple directoryVFATEntries.
* Each entry containing 13 UTF-16 characters.
*/
struct directoryVFATEntry {
/**
* Sequence number. Consists of 2 parts:
* bit 6: indicates first long filename block for the next file
* bit 0-4: the position of this long filename block (first block is 1)
*/
uint8_t sequenceNumber;
uint16_t name1[5]; // First set of UTF-16 characters
uint8_t attributes; // attributes (at the same location as in directoryEntry), always 0x0F
uint8_t reservedNT; // Reserved for use by Windows NT. Always 0.
uint8_t checksum; // Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation.
uint16_t name2[6]; // Second set of UTF-16 characters
uint16_t firstClusterLow; // firstClusterLow is always zero for longFilenames
uint16_t name3[2]; // Third set of UTF-16 characters
} PACKED;
// Definitions for directory entries
//
typedef struct directoryEntry dir_t; // Type name for directoryEntry
typedef struct directoryVFATEntry vfat_t; // Type name for directoryVFATEntry
uint8_t const DIR_NAME_0xE5 = 0x05, // escape for name[0] = 0xE5
DIR_NAME_DELETED = 0xE5, // name[0] value for entry that is free after being "deleted"
DIR_NAME_FREE = 0x00, // name[0] value for entry that is free and no allocated entries follow
DIR_ATT_READ_ONLY = 0x01, // file is read-only
DIR_ATT_HIDDEN = 0x02, // File should hidden in directory listings
DIR_ATT_SYSTEM = 0x04, // Entry is for a system file
DIR_ATT_VOLUME_ID = 0x08, // Directory entry contains the volume label
DIR_ATT_DIRECTORY = 0x10, // Entry is for a directory
DIR_ATT_ARCHIVE = 0x20, // Old DOS archive bit for backup support
DIR_ATT_LONG_NAME = 0x0F, // Test value for long name entry. Test is (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME.
DIR_ATT_LONG_NAME_MASK = 0x3F, // Test mask for long name entry
DIR_ATT_DEFINED_BITS = 0x3F; // defined attribute bits
/**
* Directory entry is part of a long name
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for part of a long name else false.
*/
static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
}
/** Mask for file/subdirectory tests */
uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
/**
* Directory entry is for a file
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for a normal file else false.
*/
static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
}
/**
* Directory entry is for a subdirectory
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for a subdirectory else false.
*/
static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
}
/**
* Directory entry is for a file or subdirectory
* \param[in] dir Pointer to a directory entry.
*
* \return true if the entry is for a normal file or subdirectory else false.
*/
static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
}
#endif // SDFATSTRUCTS_H

91
Marlin/SdFatUtil.cpp Normal file
View file

@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino SdFat Library
* Copyright (C) 2008 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#include "MarlinConfig.h"
#if ENABLED(SDSUPPORT)
#include "SdFatUtil.h"
#include "serial.h"
/**
* Amount of free RAM
* \return The number of free bytes.
*/
#ifdef __arm__
extern "C" char* sbrk(int incr);
int SdFatUtil::FreeRam() {
char top;
return &top - reinterpret_cast<char*>(sbrk(0));
}
#else // __arm__
extern char* __brkval;
extern char __bss_end;
/**
* Amount of free RAM
* \return The number of free bytes.
*/
int SdFatUtil::FreeRam() {
char top;
return __brkval ? &top - __brkval : &top - &__bss_end;
}
#endif // __arm
/**
* %Print a string in flash memory.
*
* \param[in] pr Print object for output.
* \param[in] str Pointer to string stored in flash memory.
*/
void SdFatUtil::print_P(PGM_P str) {
for (uint8_t c; (c = pgm_read_byte(str)); str++) SERIAL_CHAR(c);
}
/**
* %Print a string in flash memory followed by a CR/LF.
*
* \param[in] pr Print object for output.
* \param[in] str Pointer to string stored in flash memory.
*/
void SdFatUtil::println_P(PGM_P str) { print_P(str); SERIAL_EOL(); }
/**
* %Print a string in flash memory to Serial.
*
* \param[in] str Pointer to string stored in flash memory.
*/
void SdFatUtil::SerialPrint_P(PGM_P str) { print_P(str); }
/**
* %Print a string in flash memory to Serial followed by a CR/LF.
*
* \param[in] str Pointer to string stored in flash memory.
*/
void SdFatUtil::SerialPrintln_P(PGM_P str) { println_P(str); }
#endif // SDSUPPORT

51
Marlin/SdFatUtil.h Normal file
View file

@ -0,0 +1,51 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino SdFat Library
* Copyright (C) 2008 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SDFATUTIL_H_
#define _SDFATUTIL_H_
/**
* \file
* \brief Useful utility functions.
*/
/** Store and print a string in flash memory.*/
#define PgmPrint(x) SerialPrint_P(PSTR(x))
/** Store and print a string in flash memory followed by a CR/LF.*/
#define PgmPrintln(x) SerialPrintln_P(PSTR(x))
namespace SdFatUtil {
int FreeRam();
void print_P(PGM_P str);
void println_P(PGM_P str);
void SerialPrint_P(PGM_P str);
void SerialPrintln_P(PGM_P str);
}
using namespace SdFatUtil; // NOLINT
#endif // _SDFATUTIL_H_

100
Marlin/SdFile.cpp Normal file
View file

@ -0,0 +1,100 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#include "MarlinConfig.h"
#if ENABLED(SDSUPPORT)
#include "SdFile.h"
/**
* Create a file object and open it in the current working directory.
*
* \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
*
* \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
* OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
*/
SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) { }
/**
* Write data to an open file.
*
* \note Data is moved to the cache but may not be written to the
* storage device until sync() is called.
*
* \param[in] buf Pointer to the location of the data to be written.
*
* \param[in] nbyte Number of bytes to write.
*
* \return For success write() returns the number of bytes written, always
* \a nbyte. If an error occurs, write() returns -1. Possible errors
* include write() is called before a file has been opened, write is called
* for a read-only file, device is full, a corrupt file system or an I/O error.
*
*/
int16_t SdFile::write(const void* buf, uint16_t nbyte) { return SdBaseFile::write(buf, nbyte); }
/**
* Write a byte to a file. Required by the Arduino Print class.
* \param[in] b the byte to be written.
* Use writeError to check for errors.
*/
#if ARDUINO >= 100
size_t SdFile::write(uint8_t b) { return SdBaseFile::write(&b, 1); }
#else
void SdFile::write(uint8_t b) { SdBaseFile::write(&b, 1); }
#endif
/**
* Write a string to a file. Used by the Arduino Print class.
* \param[in] str Pointer to the string.
* Use writeError to check for errors.
*/
void SdFile::write(const char* str) { SdBaseFile::write(str, strlen(str)); }
/**
* Write a PROGMEM string to a file.
* \param[in] str Pointer to the PROGMEM string.
* Use writeError to check for errors.
*/
void SdFile::write_P(PGM_P str) {
for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c);
}
/**
* Write a PROGMEM string followed by CR/LF to a file.
* \param[in] str Pointer to the PROGMEM string.
* Use writeError to check for errors.
*/
void SdFile::writeln_P(PGM_P str) {
write_P(str);
write_P(PSTR("\r\n"));
}
#endif // SDSUPPORT

60
Marlin/SdFile.h Normal file
View file

@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* \file
* \brief SdFile class
*/
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SDFILE_H_
#define _SDFILE_H_
#include "SdBaseFile.h"
#include <Print.h>
/**
* \class SdFile
* \brief SdBaseFile with Print.
*/
class SdFile : public SdBaseFile, public Print {
public:
SdFile() {}
SdFile(const char* name, uint8_t oflag);
#if ARDUINO >= 100
size_t write(uint8_t b);
#else
void write(uint8_t b);
#endif
int16_t write(const void* buf, uint16_t nbyte);
void write(const char* str);
void write_P(PGM_P str);
void writeln_P(PGM_P str);
};
#endif // _SDFILE_H_

267
Marlin/SdInfo.h Normal file
View file

@ -0,0 +1,267 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SDINFO_H_
#define _SDINFO_H_
#include <stdint.h>
// Based on the document:
//
// SD Specifications
// Part 1
// Physical Layer
// Simplified Specification
// Version 3.01
// May 18, 2010
//
// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
// SD card commands
uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low
CMD8 = 0x08, // SEND_IF_COND - verify SD Memory Card interface operating condition
CMD9 = 0x09, // SEND_CSD - read the Card Specific Data (CSD register)
CMD10 = 0x0A, // SEND_CID - read the card identification information (CID register)
CMD12 = 0x0C, // STOP_TRANSMISSION - end multiple block read sequence
CMD13 = 0x0D, // SEND_STATUS - read the card status register
CMD17 = 0x11, // READ_SINGLE_BLOCK - read a single data block from the card
CMD18 = 0x12, // READ_MULTIPLE_BLOCK - read a multiple data blocks from the card
CMD24 = 0x18, // WRITE_BLOCK - write a single data block to the card
CMD25 = 0x19, // WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION
CMD32 = 0x20, // ERASE_WR_BLK_START - sets the address of the first block to be erased
CMD33 = 0x21, // ERASE_WR_BLK_END - sets the address of the last block of the continuous range to be erased*/
CMD38 = 0x26, // ERASE - erase all previously selected blocks */
CMD55 = 0x37, // APP_CMD - escape for application specific command */
CMD58 = 0x3A, // READ_OCR - read the OCR register of a card */
ACMD23 = 0x17, // SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be pre-erased before writing */
ACMD41 = 0x29; // SD_SEND_OP_COMD - Sends host capacity support information and activates the card's initialization process */
/** status for card in the ready state */
uint8_t const R1_READY_STATE = 0x00;
/** status for card in the idle state */
uint8_t const R1_IDLE_STATE = 0x01;
/** status bit for illegal command */
uint8_t const R1_ILLEGAL_COMMAND = 0x04;
/** start data token for read or write single block*/
uint8_t const DATA_START_BLOCK = 0xFE;
/** stop token for write multiple blocks*/
uint8_t const STOP_TRAN_TOKEN = 0xFD;
/** start data token for write multiple blocks*/
uint8_t const WRITE_MULTIPLE_TOKEN = 0xFC;
/** mask for data response tokens after a write block operation */
uint8_t const DATA_RES_MASK = 0x1F;
/** write data accepted token */
uint8_t const DATA_RES_ACCEPTED = 0x05;
/** Card IDentification (CID) register */
typedef struct CID {
// byte 0
/** Manufacturer ID */
unsigned char mid;
// byte 1-2
/** OEM/Application ID */
char oid[2];
// byte 3-7
/** Product name */
char pnm[5];
// byte 8
/** Product revision least significant digit */
unsigned char prv_m : 4;
/** Product revision most significant digit */
unsigned char prv_n : 4;
// byte 9-12
/** Product serial number */
uint32_t psn;
// byte 13
/** Manufacturing date year low digit */
unsigned char mdt_year_high : 4;
/** not used */
unsigned char reserved : 4;
// byte 14
/** Manufacturing date month */
unsigned char mdt_month : 4;
/** Manufacturing date year low digit */
unsigned char mdt_year_low : 4;
// byte 15
/** not used always 1 */
unsigned char always1 : 1;
/** CRC7 checksum */
unsigned char crc : 7;
} cid_t;
/** CSD for version 1.00 cards */
typedef struct CSDV1 {
// byte 0
unsigned char reserved1 : 6;
unsigned char csd_ver : 2;
// byte 1
unsigned char taac;
// byte 2
unsigned char nsac;
// byte 3
unsigned char tran_speed;
// byte 4
unsigned char ccc_high;
// byte 5
unsigned char read_bl_len : 4;
unsigned char ccc_low : 4;
// byte 6
unsigned char c_size_high : 2;
unsigned char reserved2 : 2;
unsigned char dsr_imp : 1;
unsigned char read_blk_misalign : 1;
unsigned char write_blk_misalign : 1;
unsigned char read_bl_partial : 1;
// byte 7
unsigned char c_size_mid;
// byte 8
unsigned char vdd_r_curr_max : 3;
unsigned char vdd_r_curr_min : 3;
unsigned char c_size_low : 2;
// byte 9
unsigned char c_size_mult_high : 2;
unsigned char vdd_w_cur_max : 3;
unsigned char vdd_w_curr_min : 3;
// byte 10
unsigned char sector_size_high : 6;
unsigned char erase_blk_en : 1;
unsigned char c_size_mult_low : 1;
// byte 11
unsigned char wp_grp_size : 7;
unsigned char sector_size_low : 1;
// byte 12
unsigned char write_bl_len_high : 2;
unsigned char r2w_factor : 3;
unsigned char reserved3 : 2;
unsigned char wp_grp_enable : 1;
// byte 13
unsigned char reserved4 : 5;
unsigned char write_partial : 1;
unsigned char write_bl_len_low : 2;
// byte 14
unsigned char reserved5: 2;
unsigned char file_format : 2;
unsigned char tmp_write_protect : 1;
unsigned char perm_write_protect : 1;
unsigned char copy : 1;
/** Indicates the file format on the card */
unsigned char file_format_grp : 1;
// byte 15
unsigned char always1 : 1;
unsigned char crc : 7;
} csd1_t;
/** CSD for version 2.00 cards */
typedef struct CSDV2 {
// byte 0
unsigned char reserved1 : 6;
unsigned char csd_ver : 2;
// byte 1
/** fixed to 0x0E */
unsigned char taac;
// byte 2
/** fixed to 0 */
unsigned char nsac;
// byte 3
unsigned char tran_speed;
// byte 4
unsigned char ccc_high;
// byte 5
/** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */
unsigned char read_bl_len : 4;
unsigned char ccc_low : 4;
// byte 6
/** not used */
unsigned char reserved2 : 4;
unsigned char dsr_imp : 1;
/** fixed to 0 */
unsigned char read_blk_misalign : 1;
/** fixed to 0 */
unsigned char write_blk_misalign : 1;
/** fixed to 0 - no partial read */
unsigned char read_bl_partial : 1;
// byte 7
/** not used */
unsigned char reserved3 : 2;
/** high part of card size */
unsigned char c_size_high : 6;
// byte 8
/** middle part of card size */
unsigned char c_size_mid;
// byte 9
/** low part of card size */
unsigned char c_size_low;
// byte 10
/** sector size is fixed at 64 KB */
unsigned char sector_size_high : 6;
/** fixed to 1 - erase single is supported */
unsigned char erase_blk_en : 1;
/** not used */
unsigned char reserved4 : 1;
// byte 11
unsigned char wp_grp_size : 7;
/** sector size is fixed at 64 KB */
unsigned char sector_size_low : 1;
// byte 12
/** write_bl_len fixed for 512 byte blocks */
unsigned char write_bl_len_high : 2;
/** fixed value of 2 */
unsigned char r2w_factor : 3;
/** not used */
unsigned char reserved5 : 2;
/** fixed value of 0 - no write protect groups */
unsigned char wp_grp_enable : 1;
// byte 13
unsigned char reserved6 : 5;
/** always zero - no partial block read*/
unsigned char write_partial : 1;
/** write_bl_len fixed for 512 byte blocks */
unsigned char write_bl_len_low : 2;
// byte 14
unsigned char reserved7: 2;
/** Do not use always 0 */
unsigned char file_format : 2;
unsigned char tmp_write_protect : 1;
unsigned char perm_write_protect : 1;
unsigned char copy : 1;
/** Do not use always 0 */
unsigned char file_format_grp : 1;
// byte 15
/** not used always 1 */
unsigned char always1 : 1;
/** checksum */
unsigned char crc : 7;
} csd2_t;
/** union of old and new style CSD register */
union csd_t {
csd1_t v1;
csd2_t v2;
};
#endif // _SDINFO_H_

384
Marlin/SdVolume.cpp Normal file
View file

@ -0,0 +1,384 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#include "MarlinConfig.h"
#if ENABLED(SDSUPPORT)
#include "SdVolume.h"
#if !USE_MULTIPLE_CARDS
// raw block cache
uint32_t SdVolume::cacheBlockNumber_; // current block number
cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card
Sd2Card* SdVolume::sdCard_; // pointer to SD card object
bool SdVolume::cacheDirty_; // cacheFlush() will write block if true
uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT
#endif // USE_MULTIPLE_CARDS
// find a contiguous group of clusters
bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
// start of group
uint32_t bgnCluster;
// end of group
uint32_t endCluster;
// last cluster of FAT
uint32_t fatEnd = clusterCount_ + 1;
// flag to save place to start next search
bool setStart;
// set search start cluster
if (*curCluster) {
// try to make file contiguous
bgnCluster = *curCluster + 1;
// don't save new start location
setStart = false;
}
else {
// start at likely place for free cluster
bgnCluster = allocSearchStart_;
// save next search start if one cluster
setStart = count == 1;
}
// end of group
endCluster = bgnCluster;
// search the FAT for free clusters
for (uint32_t n = 0;; n++, endCluster++) {
// can't find space checked all clusters
if (n >= clusterCount_) return false;
// past end - start from beginning of FAT
if (endCluster > fatEnd) {
bgnCluster = endCluster = 2;
}
uint32_t f;
if (!fatGet(endCluster, &f)) return false;
if (f != 0) {
// cluster in use try next cluster as bgnCluster
bgnCluster = endCluster + 1;
}
else if ((endCluster - bgnCluster + 1) == count) {
// done - found space
break;
}
}
// mark end of chain
if (!fatPutEOC(endCluster)) return false;
// link clusters
while (endCluster > bgnCluster) {
if (!fatPut(endCluster - 1, endCluster)) return false;
endCluster--;
}
if (*curCluster != 0) {
// connect chains
if (!fatPut(*curCluster, bgnCluster)) return false;
}
// return first cluster number to caller
*curCluster = bgnCluster;
// remember possible next free cluster
if (setStart) allocSearchStart_ = bgnCluster + 1;
return true;
}
bool SdVolume::cacheFlush() {
if (cacheDirty_) {
if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data))
return false;
// mirror FAT tables
if (cacheMirrorBlock_) {
if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data))
return false;
cacheMirrorBlock_ = 0;
}
cacheDirty_ = 0;
}
return true;
}
bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) {
if (cacheBlockNumber_ != blockNumber) {
if (!cacheFlush()) return false;
if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) return false;
cacheBlockNumber_ = blockNumber;
}
if (dirty) cacheDirty_ = true;
return true;
}
// return the size in bytes of a cluster chain
bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
uint32_t s = 0;
do {
if (!fatGet(cluster, &cluster)) return false;
s += 512UL << clusterSizeShift_;
} while (!isEOC(cluster));
*size = s;
return true;
}
// Fetch a FAT entry
bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
uint32_t lba;
if (cluster > (clusterCount_ + 1)) return false;
if (FAT12_SUPPORT && fatType_ == 12) {
uint16_t index = cluster;
index += index >> 1;
lba = fatStartBlock_ + (index >> 9);
if (!cacheRawBlock(lba, CACHE_FOR_READ)) return false;
index &= 0x1FF;
uint16_t tmp = cacheBuffer_.data[index];
index++;
if (index == 512) {
if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) return false;
index = 0;
}
tmp |= cacheBuffer_.data[index] << 8;
*value = cluster & 1 ? tmp >> 4 : tmp & 0xFFF;
return true;
}
if (fatType_ == 16)
lba = fatStartBlock_ + (cluster >> 8);
else if (fatType_ == 32)
lba = fatStartBlock_ + (cluster >> 7);
else
return false;
if (lba != cacheBlockNumber_ && !cacheRawBlock(lba, CACHE_FOR_READ))
return false;
*value = (fatType_ == 16) ? cacheBuffer_.fat16[cluster & 0xFF] : (cacheBuffer_.fat32[cluster & 0x7F] & FAT32MASK);
return true;
}
// Store a FAT entry
bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
uint32_t lba;
// error if reserved cluster
if (cluster < 2) return false;
// error if not in FAT
if (cluster > (clusterCount_ + 1)) return false;
if (FAT12_SUPPORT && fatType_ == 12) {
uint16_t index = cluster;
index += index >> 1;
lba = fatStartBlock_ + (index >> 9);
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) return false;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
index &= 0x1FF;
uint8_t tmp = value;
if (cluster & 1) {
tmp = (cacheBuffer_.data[index] & 0xF) | tmp << 4;
}
cacheBuffer_.data[index] = tmp;
index++;
if (index == 512) {
lba++;
index = 0;
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) return false;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
}
tmp = value >> 4;
if (!(cluster & 1)) {
tmp = ((cacheBuffer_.data[index] & 0xF0)) | tmp >> 4;
}
cacheBuffer_.data[index] = tmp;
return true;
}
if (fatType_ == 16)
lba = fatStartBlock_ + (cluster >> 8);
else if (fatType_ == 32)
lba = fatStartBlock_ + (cluster >> 7);
else
return false;
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) return false;
// store entry
if (fatType_ == 16)
cacheBuffer_.fat16[cluster & 0xFF] = value;
else
cacheBuffer_.fat32[cluster & 0x7F] = value;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
return true;
}
// free a cluster chain
bool SdVolume::freeChain(uint32_t cluster) {
// clear free cluster location
allocSearchStart_ = 2;
do {
uint32_t next;
if (!fatGet(cluster, &next)) return false;
// free cluster
if (!fatPut(cluster, 0)) return false;
cluster = next;
} while (!isEOC(cluster));
return true;
}
/** Volume free space in clusters.
*
* \return Count of free clusters for success or -1 if an error occurs.
*/
int32_t SdVolume::freeClusterCount() {
uint32_t free = 0;
uint16_t n;
uint32_t todo = clusterCount_ + 2;
if (fatType_ == 16)
n = 256;
else if (fatType_ == 32)
n = 128;
else // put FAT12 here
return -1;
for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) {
if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1;
NOMORE(n, todo);
if (fatType_ == 16) {
for (uint16_t i = 0; i < n; i++)
if (cacheBuffer_.fat16[i] == 0) free++;
}
else {
for (uint16_t i = 0; i < n; i++)
if (cacheBuffer_.fat32[i] == 0) free++;
}
}
return free;
}
/** Initialize a FAT volume.
*
* \param[in] dev The SD card where the volume is located.
*
* \param[in] part The partition to be used. Legal values for \a part are
* 1-4 to use the corresponding partition on a device formatted with
* a MBR, Master Boot Record, or zero if the device is formatted as
* a super floppy with the FAT boot sector in block zero.
*
* \return true for success, false for failure.
* Reasons for failure include not finding a valid partition, not finding a valid
* FAT file system in the specified partition or an I/O error.
*/
bool SdVolume::init(Sd2Card* dev, uint8_t part) {
uint32_t totalBlocks, volumeStartBlock = 0;
fat32_boot_t* fbs;
sdCard_ = dev;
fatType_ = 0;
allocSearchStart_ = 2;
cacheDirty_ = 0; // cacheFlush() will write block if true
cacheMirrorBlock_ = 0;
cacheBlockNumber_ = 0xFFFFFFFF;
// if part == 0 assume super floppy with FAT boot sector in block zero
// if part > 0 assume mbr volume with partition table
if (part) {
if (part > 4) return false;
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false;
part_t* p = &cacheBuffer_.mbr.part[part - 1];
if ((p->boot & 0x7F) != 0 || p->totalSectors < 100 || p->firstSector == 0)
return false; // not a valid partition
volumeStartBlock = p->firstSector;
}
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false;
fbs = &cacheBuffer_.fbs32;
if (fbs->bytesPerSector != 512 ||
fbs->fatCount == 0 ||
fbs->reservedSectorCount == 0 ||
fbs->sectorsPerCluster == 0) {
// not valid FAT volume
return false;
}
fatCount_ = fbs->fatCount;
blocksPerCluster_ = fbs->sectorsPerCluster;
// determine shift that is same as multiply by blocksPerCluster_
clusterSizeShift_ = 0;
while (blocksPerCluster_ != _BV(clusterSizeShift_)) {
// error if not power of 2
if (clusterSizeShift_++ > 7) return false;
}
blocksPerFat_ = fbs->sectorsPerFat16 ?
fbs->sectorsPerFat16 : fbs->sectorsPerFat32;
fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount;
// count for FAT16 zero for FAT32
rootDirEntryCount_ = fbs->rootDirEntryCount;
// directory start for FAT16 dataStart for FAT32
rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_;
// data start for FAT16 and FAT32
dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511) / 512);
// total blocks for FAT16 or FAT32
totalBlocks = fbs->totalSectors16 ?
fbs->totalSectors16 : fbs->totalSectors32;
// total data blocks
clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);
// divide by cluster size to get cluster count
clusterCount_ >>= clusterSizeShift_;
// FAT type is determined by cluster count
if (clusterCount_ < 4085) {
fatType_ = 12;
if (!FAT12_SUPPORT) return false;
}
else if (clusterCount_ < 65525)
fatType_ = 16;
else {
rootDirStart_ = fbs->fat32RootCluster;
fatType_ = 32;
}
return true;
}
#endif // SDSUPPORT

211
Marlin/SdVolume.h Normal file
View file

@ -0,0 +1,211 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* \file
* \brief SdVolume class
*/
/**
* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*/
#ifndef _SDVOLUME_H_
#define _SDVOLUME_H_
#include "SdFatConfig.h"
#include "Sd2Card.h"
#include "SdFatStructs.h"
//==============================================================================
// SdVolume class
/**
* \brief Cache for an SD data block
*/
union cache_t {
uint8_t data[512]; // Used to access cached file data blocks.
uint16_t fat16[256]; // Used to access cached FAT16 entries.
uint32_t fat32[128]; // Used to access cached FAT32 entries.
dir_t dir[16]; // Used to access cached directory entries.
mbr_t mbr; // Used to access a cached Master Boot Record.
fat_boot_t fbs; // Used to access to a cached FAT boot sector.
fat32_boot_t fbs32; // Used to access to a cached FAT32 boot sector.
fat32_fsinfo_t fsinfo; // Used to access to a cached FAT32 FSINFO sector.
};
/**
* \class SdVolume
* \brief Access FAT16 and FAT32 volumes on SD and SDHC cards.
*/
class SdVolume {
public:
// Create an instance of SdVolume
SdVolume() : fatType_(0) {}
/**
* Clear the cache and returns a pointer to the cache. Used by the WaveRP
* recorder to do raw write to the SD card. Not for normal apps.
* \return A pointer to the cache buffer or zero if an error occurs.
*/
cache_t* cacheClear() {
if (!cacheFlush()) return 0;
cacheBlockNumber_ = 0xFFFFFFFF;
return &cacheBuffer_;
}
/**
* Initialize a FAT volume. Try partition one first then try super
* floppy format.
*
* \param[in] dev The Sd2Card where the volume is located.
*
* \return true for success, false for failure.
* Reasons for failure include not finding a valid partition, not finding
* a valid FAT file system or an I/O error.
*/
bool init(Sd2Card* dev) { return init(dev, 1) ? true : init(dev, 0); }
bool init(Sd2Card* dev, uint8_t part);
// inline functions that return volume info
uint8_t blocksPerCluster() const { return blocksPerCluster_; } //> \return The volume's cluster size in blocks.
uint32_t blocksPerFat() const { return blocksPerFat_; } //> \return The number of blocks in one FAT.
uint32_t clusterCount() const { return clusterCount_; } //> \return The total number of clusters in the volume.
uint8_t clusterSizeShift() const { return clusterSizeShift_; } //> \return The shift count required to multiply by blocksPerCluster.
uint32_t dataStartBlock() const { return dataStartBlock_; } //> \return The logical block number for the start of file data.
uint8_t fatCount() const { return fatCount_; } //> \return The number of FAT structures on the volume.
uint32_t fatStartBlock() const { return fatStartBlock_; } //> \return The logical block number for the start of the first FAT.
uint8_t fatType() const { return fatType_; } //> \return The FAT type of the volume. Values are 12, 16 or 32.
int32_t freeClusterCount();
uint32_t rootDirEntryCount() const { return rootDirEntryCount_; } /** \return The number of entries in the root directory for FAT16 volumes. */
/**
* \return The logical block number for the start of the root directory
* on FAT16 volumes or the first cluster number on FAT32 volumes.
*/
uint32_t rootDirStart() const { return rootDirStart_; }
/**
* Sd2Card object for this volume
* \return pointer to Sd2Card object.
*/
Sd2Card* sdCard() { return sdCard_; }
/**
* Debug access to FAT table
*
* \param[in] n cluster number.
* \param[out] v value of entry
* \return true for success or false for failure
*/
bool dbgFat(uint32_t n, uint32_t* v) { return fatGet(n, v); }
private:
// Allow SdBaseFile access to SdVolume private data.
friend class SdBaseFile;
// value for dirty argument in cacheRawBlock to indicate read from cache
static bool const CACHE_FOR_READ = false;
// value for dirty argument in cacheRawBlock to indicate write to cache
static bool const CACHE_FOR_WRITE = true;
#if USE_MULTIPLE_CARDS
cache_t cacheBuffer_; // 512 byte cache for device blocks
uint32_t cacheBlockNumber_; // Logical number of block in the cache
Sd2Card* sdCard_; // Sd2Card object for cache
bool cacheDirty_; // cacheFlush() will write block if true
uint32_t cacheMirrorBlock_; // block number for mirror FAT
#else
static cache_t cacheBuffer_; // 512 byte cache for device blocks
static uint32_t cacheBlockNumber_; // Logical number of block in the cache
static Sd2Card* sdCard_; // Sd2Card object for cache
static bool cacheDirty_; // cacheFlush() will write block if true
static uint32_t cacheMirrorBlock_; // block number for mirror FAT
#endif
uint32_t allocSearchStart_; // start cluster for alloc search
uint8_t blocksPerCluster_; // cluster size in blocks
uint32_t blocksPerFat_; // FAT size in blocks
uint32_t clusterCount_; // clusters in one FAT
uint8_t clusterSizeShift_; // shift to convert cluster count to block count
uint32_t dataStartBlock_; // first data block number
uint8_t fatCount_; // number of FATs on volume
uint32_t fatStartBlock_; // start block for first FAT
uint8_t fatType_; // volume type (12, 16, OR 32)
uint16_t rootDirEntryCount_; // number of entries in FAT16 root dir
uint32_t rootDirStart_; // root start block for FAT16, cluster for FAT32
bool allocContiguous(uint32_t count, uint32_t* curCluster);
uint8_t blockOfCluster(uint32_t position) const { return (position >> 9) & (blocksPerCluster_ - 1); }
uint32_t clusterStartBlock(uint32_t cluster) const { return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_); }
uint32_t blockNumber(uint32_t cluster, uint32_t position) const { return clusterStartBlock(cluster) + blockOfCluster(position); }
cache_t* cache() { return &cacheBuffer_; }
uint32_t cacheBlockNumber() const { return cacheBlockNumber_; }
#if USE_MULTIPLE_CARDS
bool cacheFlush();
bool cacheRawBlock(uint32_t blockNumber, bool dirty);
#else
static bool cacheFlush();
static bool cacheRawBlock(uint32_t blockNumber, bool dirty);
#endif
// used by SdBaseFile write to assign cache to SD location
void cacheSetBlockNumber(uint32_t blockNumber, bool dirty) {
cacheDirty_ = dirty;
cacheBlockNumber_ = blockNumber;
}
void cacheSetDirty() { cacheDirty_ |= CACHE_FOR_WRITE; }
bool chainSize(uint32_t beginCluster, uint32_t* size);
bool fatGet(uint32_t cluster, uint32_t* value);
bool fatPut(uint32_t cluster, uint32_t value);
bool fatPutEOC(uint32_t cluster) { return fatPut(cluster, 0x0FFFFFFF); }
bool freeChain(uint32_t cluster);
bool isEOC(uint32_t cluster) const {
if (FAT12_SUPPORT && fatType_ == 12) return cluster >= FAT12EOC_MIN;
if (fatType_ == 16) return cluster >= FAT16EOC_MIN;
return cluster >= FAT32EOC_MIN;
}
bool readBlock(uint32_t block, uint8_t* dst) { return sdCard_->readBlock(block, dst); }
bool writeBlock(uint32_t block, const uint8_t* dst) { return sdCard_->writeBlock(block, dst); }
// Deprecated functions
#if ALLOW_DEPRECATED_FUNCTIONS
public:
/**
* \deprecated Use: bool SdVolume::init(Sd2Card* dev);
* \param[in] dev The SD card where the volume is located.
* \return true for success or false for failure.
*/
bool init(Sd2Card& dev) { return init(&dev); }
/**
* \deprecated Use: bool SdVolume::init(Sd2Card* dev, uint8_t vol);
* \param[in] dev The SD card where the volume is located.
* \param[in] part The partition to be used.
* \return true for success or false for failure.
*/
bool init(Sd2Card& dev, uint8_t part) { return init(&dev, part); }
#endif // ALLOW_DEPRECATED_FUNCTIONS
};
#endif // _SDVOLUME_H_

94
Marlin/Version.h Normal file
View file

@ -0,0 +1,94 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* This file is the standard Marlin version identifier file, all fields can be
* overriden by the ones defined on _Version.h by using the Configuration.h
* directive USE_AUTOMATIC_VERSIONING.
*/
#if ENABLED(USE_AUTOMATIC_VERSIONING)
#include "_Version.h"
#else
/**
* Marlin release version identifier
*/
#define SHORT_BUILD_VERSION "1.1.9"
/**
* Verbose version identifier which should contain a reference to the location
* from where the binary was downloaded or the source code was compiled.
*/
#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
/**
* The STRING_DISTRIBUTION_DATE represents when the binary file was built,
* here we define this default string as the date where the latest release
* version was tagged.
*/
#define STRING_DISTRIBUTION_DATE "2018-08-01"
/**
* Required minimum Configuration.h and Configuration_adv.h file versions.
*
* You must increment this version number for every significant change such as,
* but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on
* the configuration files.
*/
#define REQUIRED_CONFIGURATION_H_VERSION 010109
#define REQUIRED_CONFIGURATION_ADV_H_VERSION 010109
/**
* The protocol for communication to the host. Protocol indicates communication
* standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
* (Other behaviors are given by the firmware version and capabilities report.)
*/
#define PROTOCOL_VERSION "1.0"
/**
* Defines a generic printer name to be output to the LCD after booting Marlin.
*/
#define MACHINE_NAME "3D Printer"
/**
* The SOURCE_CODE_URL is the location where users will find the Marlin Source
* Code which is installed on the device. In most cases —unless the manufacturer
* has a distinct Github fork— the Source Code URL should just be the main
* Marlin repository.
*/
#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
/**
* Default generic printer UUID.
*/
#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
/**
* The WEBSITE_URL is the location where users can get more information such as
* documentation about a specific Marlin release.
*/
#define WEBSITE_URL "http://marlinfw.org"
#endif // USE_AUTOMATIC_VERSIONING

38
Marlin/bitmap_flags.h Normal file
View file

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef _BITMAP_FLAGS_H_
#define _BITMAP_FLAGS_H_
#include "macros.h"
/**
* These support functions allow the use of large bit arrays of flags that take very
* little RAM. Currently they are limited to being 16x16 in size. Changing the declaration
* to unsigned long will allow us to go to 32x32 if higher resolution meshes are needed
* in the future.
*/
FORCE_INLINE void bitmap_clear(uint16_t bits[16], const uint8_t x, const uint8_t y) { CBI(bits[y], x); }
FORCE_INLINE void bitmap_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { SBI(bits[y], x); }
FORCE_INLINE bool is_bitmap_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { return TEST(bits[y], x); }
#endif // _BITMAP_FLAGS_H_

46
Marlin/blinkm.cpp Normal file
View file

@ -0,0 +1,46 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* blinkm.cpp - Control a BlinkM over i2c
*/
#include "MarlinConfig.h"
#if ENABLED(BLINKM)
#include "blinkm.h"
#include "leds.h"
#include <Wire.h>
void blinkm_set_led_color(const LEDColor &color) {
Wire.begin();
Wire.beginTransmission(0x09);
Wire.write('o'); //to disable ongoing script, only needs to be used once
Wire.write('n');
Wire.write(color.r);
Wire.write(color.g);
Wire.write(color.b);
Wire.endTransmission();
}
#endif // BLINKM

35
Marlin/blinkm.h Normal file
View file

@ -0,0 +1,35 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* blinkm.h - Control a BlinkM over i2c
*/
#ifndef _BLINKM_H_
#define _BLINKM_H_
struct LEDColor;
typedef LEDColor LEDColor;
void blinkm_set_led_color(const LEDColor &color);
#endif // _BLINKM_H_

161
Marlin/boards.h Normal file
View file

@ -0,0 +1,161 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef BOARDS_H
#define BOARDS_H
#define BOARD_UNKNOWN -1
//
// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
//
#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2
#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
#define BOARD_RAMPS_13_SF 38 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
#define BOARD_RAMPS_14_EFB 43 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
#define BOARD_RAMPS_14_EEB 44 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
#define BOARD_RAMPS_14_EFF 45 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
#define BOARD_RAMPS_14_EEF 46 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
#define BOARD_RAMPS_14_SF 48 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
#define BOARD_RAMPS_PLUS_EFB 143 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
#define BOARD_RAMPS_PLUS_EEB 144 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
#define BOARD_RAMPS_PLUS_EFF 145 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
#define BOARD_RAMPS_PLUS_EEF 146 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
#define BOARD_RAMPS_PLUS_SF 148 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
//
// RAMPS Derivatives - ATmega1280, ATmega2560
//
#define BOARD_3DRAG 77 // 3Drag Controller
#define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller)
#define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller)
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_MKS_BASE 40 // MKS BASE v1.0
#define BOARD_MKS_BASE_15 405 // MKS v1.5 with Allegro A4982 stepper drivers
#define BOARD_MKS_BASE_HEROIC 41 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
#define BOARD_MKS_GEN_13 47 // MKS GEN v1.3 or 1.4
#define BOARD_MKS_GEN_L 53 // MKS GEN L
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define BOARD_FELIX2 37 // Felix 2.0+ Electronics Board (RAMPS like)
#define BOARD_RIGIDBOARD 42 // Invent-A-Part RigidBoard
#define BOARD_RIGIDBOARD_V2 52 // Invent-A-Part RigidBoard V2
#define BOARD_SAINSMART_2IN1 49 // Sainsmart 2-in-1 board
#define BOARD_ULTIMAKER 7 // Ultimaker
#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
#define BOARD_AZTEEG_X3 67 // Azteeg X3
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
#define BOARD_RUMBA 80 // Rumba
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
#define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB
#define BOARD_TRIGORILLA_14 443 // TriGorilla Anycubic version 1.4 based on RAMPS EFB
#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8
//
// Other ATmega1280, ATmega2560
//
#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11
#define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12
#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
#define BOARD_CHEAPTRONIC_V2 21 // Cheaptronic v2.0
#define BOARD_MIGHTYBOARD_REVE 200 // Makerbot Mightyboard Revision E
#define BOARD_MEGATRONICS 70 // Megatronics
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1
#define BOARD_RAMBO 301 // Rambo
#define BOARD_MINIRAMBO 302 // Mini-Rambo
#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a
#define BOARD_EINSY_RAMBO 304 // Einsy Rambo
#define BOARD_EINSY_RETRO 305 // Einsy Retro
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
#define BOARD_LEAPFROG 999 // Leapfrog
#define BOARD_MEGACONTROLLER 310 // Mega controller
#define BOARD_SCOOVO_X9H 321 // abee Scoovo X9H
#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A
#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+ (with auto level probe)
//
// ATmega1281, ATmega2561
//
#define BOARD_MINITRONICS 702 // Minitronics v1.0/1.1
#define BOARD_SILVER_GATE 25 // Silvergate v1.0
//
// Sanguinololu and Derivatives - ATmega644P, ATmega1284P
//
#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
#define BOARD_MELZI 63 // Melzi
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board
#define BOARD_MELZI_TRONXY 505 // Tronxy X5S
#define BOARD_STB_11 64 // STB V1.1
#define BOARD_AZTEEG_X1 65 // Azteeg X1
#define BOARD_ANET_10 69 // Anet 1.0 (Melzi clone)
//
// Other ATmega644P, ATmega644, ATmega1284P
//
#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics
#define BOARD_GEN3_PLUS 9 // Gen3+
#define BOARD_GEN6 5 // Gen6
#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe
#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
#define BOARD_GEN7_13 12 // Gen7 v1.3
#define BOARD_GEN7_14 13 // Gen7 v1.4
#define BOARD_OMCA_A 90 // Alpha OMCA board
#define BOARD_OMCA 91 // Final OMCA board
#define BOARD_SETHI 20 // Sethi 3D_1
//
// Teensyduino - AT90USB1286, AT90USB1286P
//
#define BOARD_TEENSYLU 8 // Teensylu
#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286)
#define BOARD_PRINTRBOARD_REVF 811 // Printrboard Revision F (AT90USB1286)
#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646)
#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286)
#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286)
#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84 make
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
#define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board)
#endif // __BOARDS_H

146
Marlin/buzzer.h Normal file
View file

@ -0,0 +1,146 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __BUZZER_H__
#define __BUZZER_H__
#include "types.h"
#include "fastio.h"
#include "circularqueue.h"
#include "temperature.h"
#include "MarlinConfig.h"
#define TONE_QUEUE_LENGTH 4
/**
* @brief Tone structure
* @details Simple abstraction of a tone based on a duration and a frequency.
*/
struct tone_t {
uint16_t duration;
uint16_t frequency;
};
/**
* @brief Buzzer class
*/
class Buzzer {
private:
struct state_t {
tone_t tone;
uint32_t endtime;
} state;
protected:
CircularQueue<tone_t, TONE_QUEUE_LENGTH> buffer;
/**
* @brief Inverts the sate of a digital PIN
* @details This will invert the current state of an digital IO pin.
*/
void invert() {
TOGGLE(BEEPER_PIN);
}
/**
* @brief Turn off a digital PIN
* @details Alias of digitalWrite(PIN, LOW) using FastIO
*/
void off() {
WRITE(BEEPER_PIN, LOW);
}
/**
* @brief Turn on a digital PIN
* @details Alias of digitalWrite(PIN, HIGH) using FastIO
*/
void on() {
WRITE(BEEPER_PIN, HIGH);
}
/**
* @brief Resets the state of the class
* @details Brings the class state to a known one.
*/
void reset() {
this->off();
this->state.endtime = 0;
}
public:
/**
* @brief Class constructor
*/
Buzzer() {
SET_OUTPUT(BEEPER_PIN);
this->reset();
}
/**
* @brief Add a tone to the queue
* @details Adds a tone_t structure to the ring buffer, will block IO if the
* queue is full waiting for one slot to get available.
*
* @param duration Duration of the tone in milliseconds
* @param frequency Frequency of the tone in hertz
*/
void tone(const uint16_t &duration, const uint16_t &frequency=0) {
while (buffer.isFull()) {
this->tick();
thermalManager.manage_heater();
}
tone_t tone = { duration, frequency };
this->buffer.enqueue(tone);
}
/**
* @brief Loop function
* @details This function should be called at loop, it will take care of
* playing the tones in the queue.
*/
virtual void tick() {
const millis_t now = millis();
if (!this->state.endtime) {
if (this->buffer.isEmpty()) return;
this->state.tone = this->buffer.dequeue();
this->state.endtime = now + this->state.tone.duration;
if (this->state.tone.frequency > 0) {
#if ENABLED(SPEAKER)
CRITICAL_SECTION_START;
::tone(BEEPER_PIN, this->state.tone.frequency, this->state.tone.duration);
CRITICAL_SECTION_END;
#else
this->on();
#endif
}
}
else if (ELAPSED(now, this->state.endtime)) this->reset();
}
};
extern Buzzer buzzer;
#endif

987
Marlin/cardreader.cpp Normal file
View file

@ -0,0 +1,987 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "MarlinConfig.h"
#if ENABLED(SDSUPPORT)
#include "cardreader.h"
#include "ultralcd.h"
#include "stepper.h"
#include "language.h"
#include "printcounter.h"
#if ENABLED(POWER_LOSS_RECOVERY)
#include "power_loss_recovery.h"
#endif
CardReader::CardReader() {
#if ENABLED(SDCARD_SORT_ALPHA)
sort_count = 0;
#if ENABLED(SDSORT_GCODE)
sort_alpha = true;
sort_folders = FOLDER_SORTING;
//sort_reverse = false;
#endif
#endif
sdprinting = cardOK = saving = logging = false;
filesize = 0;
sdpos = 0;
file_subcall_ctr = 0;
workDirDepth = 0;
ZERO(workDirParents);
// Disable autostart until card is initialized
autostart_index = -1;
//power to SD reader
#if SDPOWER > -1
OUT_WRITE(SDPOWER, HIGH);
#endif
}
char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters
char *pos = buffer;
for (uint8_t i = 0; i < 11; i++) {
if (p.name[i] == ' ') continue;
if (i == 8) *pos++ = '.';
*pos++ = p.name[i];
}
*pos++ = 0;
return buffer;
}
/**
* Dive into a folder and recurse depth-first to perform a pre-set operation lsAction:
* LS_Count - Add +1 to nrFiles for every file within the parent
* LS_GetFilename - Get the filename of the file indexed by nrFile_index
* LS_SerialPrint - Print the full path and size of each file to serial output
*/
uint16_t nrFile_index;
void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) {
dir_t p;
uint8_t cnt = 0;
// Read the next entry from a directory
while (parent.readDir(&p, longFilename) > 0) {
// If the entry is a directory and the action is LS_SerialPrint
if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) {
// Get the short name for the item, which we know is a folder
char dosFilename[FILENAME_LENGTH];
createFilename(dosFilename, p);
// Allocate enough stack space for the full path to a folder, trailing slash, and nul
const bool prepend_is_empty = (!prepend || prepend[0] == '\0');
const int len = (prepend_is_empty ? 1 : strlen(prepend)) + strlen(dosFilename) + 1 + 1;
char path[len];
// Append the FOLDERNAME12/ to the passed string.
// It contains the full path to the "parent" argument.
// We now have the full path to the item in this folder.
strcpy(path, prepend_is_empty ? "/" : prepend); // root slash if prepend is empty
strcat(path, dosFilename); // FILENAME_LENGTH-1 characters maximum
strcat(path, "/"); // 1 character
// Serial.print(path);
// Get a new directory object using the full path
// and dive recursively into it.
SdFile dir;
if (!dir.open(&parent, dosFilename, O_READ)) {
if (lsAction == LS_SerialPrint) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHOLN(dosFilename);
}
}
lsDive(path, dir);
// close() is done automatically by destructor of SdFile
}
else {
uint8_t pn0 = p.name[0];
if (pn0 == DIR_NAME_FREE) break;
if (pn0 == DIR_NAME_DELETED || pn0 == '.') continue;
if (longFilename[0] == '.') continue;
if (!DIR_IS_FILE_OR_SUBDIR(&p) || (p.attributes & DIR_ATT_HIDDEN)) continue;
filenameIsDir = DIR_IS_SUBDIR(&p);
if (!filenameIsDir && (p.name[8] != 'G' || p.name[9] == '~')) continue;
switch (lsAction) { // 1 based file count
case LS_Count:
nrFiles++;
break;
case LS_SerialPrint:
createFilename(filename, p);
if (prepend) SERIAL_PROTOCOL(prepend);
SERIAL_PROTOCOL(filename);
SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOLLN(p.fileSize);
break;
case LS_GetFilename:
createFilename(filename, p);
if (match != NULL) {
if (strcasecmp(match, filename) == 0) return;
}
else if (cnt == nrFile_index) return; // 0 based index
cnt++;
break;
}
}
} // while readDir
}
void CardReader::ls() {
lsAction = LS_SerialPrint;
root.rewind();
lsDive(NULL, root);
}
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
/**
* Get a long pretty path based on a DOS 8.3 path
*/
void CardReader::printLongPath(char *path) {
lsAction = LS_GetFilename;
int i, pathLen = strlen(path);
// SERIAL_ECHOPGM("Full Path: "); SERIAL_ECHOLN(path);
// Zero out slashes to make segments
for (i = 0; i < pathLen; i++) if (path[i] == '/') path[i] = '\0';
SdFile diveDir = root; // start from the root for segment 1
for (i = 0; i < pathLen;) {
if (path[i] == '\0') i++; // move past a single nul
char *segment = &path[i]; // The segment after most slashes
// If a segment is empty (extra-slash) then exit
if (!*segment) break;
// Go to the next segment
while (path[++i]) { }
// SERIAL_ECHOPGM("Looking for segment: "); SERIAL_ECHOLN(segment);
// Find the item, setting the long filename
diveDir.rewind();
lsDive(NULL, diveDir, segment);
// Print /LongNamePart to serial output
SERIAL_PROTOCOLCHAR('/');
SERIAL_PROTOCOL(longFilename[0] ? longFilename : "???");
// If the filename was printed then that's it
if (!filenameIsDir) break;
// SERIAL_ECHOPGM("Opening dir: "); SERIAL_ECHOLN(segment);
// Open the sub-item as the new dive parent
SdFile dir;
if (!dir.open(&diveDir, segment, O_READ)) {
SERIAL_EOL();
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHO(segment);
break;
}
diveDir.close();
diveDir = dir;
} // while i<pathLen
SERIAL_EOL();
}
#endif // LONG_FILENAME_HOST_SUPPORT
/**
* Echo the DOS 8.3 filename (and long filename, if any)
*/
void CardReader::printFilename() {
if (file.isOpen()) {
char dosFilename[FILENAME_LENGTH];
file.getFilename(dosFilename);
SERIAL_ECHO(dosFilename);
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
getfilename(0, dosFilename);
if (longFilename[0]) {
SERIAL_ECHO(' ');
SERIAL_ECHO(longFilename);
}
#endif
}
else
SERIAL_ECHOPGM("(no file)");
SERIAL_EOL();
}
void CardReader::initsd() {
cardOK = false;
if (root.isOpen()) root.close();
#ifndef SPI_SPEED
#define SPI_SPEED SPI_FULL_SPEED
#endif
if (!sd2card.init(SPI_SPEED, SDSS)
#if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
&& !sd2card.init(SPI_SPEED, LCD_SDSS)
#endif
) {
//if (!sd2card.init(SPI_HALF_SPEED,SDSS))
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL);
}
else if (!volume.init(&sd2card)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL);
}
else if (!root.openRoot(&volume)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_SD_OPENROOT_FAIL);
}
else {
cardOK = true;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_SD_CARD_OK);
}
setroot();
}
void CardReader::release() {
sdprinting = false;
cardOK = false;
}
void CardReader::openAndPrintFile(const char *name) {
char cmd[4 + strlen(name) + 1]; // Room for "M23 ", filename, and null
sprintf_P(cmd, PSTR("M23 %s"), name);
for (char *c = &cmd[4]; *c; c++) *c = tolower(*c);
enqueue_and_echo_command_now(cmd);
enqueue_and_echo_commands_P(PSTR("M24"));
}
void CardReader::startFileprint() {
if (cardOK) {
sdprinting = true;
#if SD_RESORT
flush_presort();
#endif
}
}
void CardReader::stopSDPrint(
#if SD_RESORT
const bool re_sort/*=false*/
#endif
) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
did_pause_print = 0;
#endif
sdprinting = false;
if (isFileOpen()) file.close();
#if SD_RESORT
if (re_sort) presort();
#endif
}
void CardReader::openLogFile(char * const path) {
logging = true;
openFile(path, false);
}
void appendAtom(SdFile &file, char *& dst, uint8_t &cnt) {
file.getFilename(dst);
while (*dst && cnt < MAXPATHNAMELENGTH) { dst++; cnt++; }
if (cnt < MAXPATHNAMELENGTH) { *dst = '/'; dst++; cnt++; }
}
void CardReader::getAbsFilename(char *t) {
*t++ = '/'; // Root folder
uint8_t cnt = 1;
for (uint8_t i = 0; i < workDirDepth; i++) // Loop to current work dir
appendAtom(workDirParents[i], t, cnt);
if (cnt < MAXPATHNAMELENGTH - (FILENAME_LENGTH)) {
appendAtom(file, t, cnt);
--t;
}
*t = '\0';
}
void CardReader::openFile(char * const path, const bool read, const bool subcall/*=false*/) {
if (!cardOK) return;
uint8_t doing = 0;
if (isFileOpen()) { // Replacing current file or doing a subroutine
if (subcall) {
if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
SERIAL_ERROR_START();
SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
SERIAL_ERRORLN((int)SD_PROCEDURE_DEPTH);
kill(PSTR(MSG_KILLED));
return;
}
// Store current filename (based on workDirParents) and position
getAbsFilename(proc_filenames[file_subcall_ctr]);
filespos[file_subcall_ctr] = sdpos;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", path);
SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]);
SERIAL_ECHOLNPAIR("\" pos", sdpos);
file_subcall_ctr++;
}
else
doing = 1;
}
else if (subcall) { // Returning from a subcall?
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM("END SUBROUTINE");
}
else { // Opening fresh file
doing = 2;
file_subcall_ctr = 0; // Reset procedure depth in case user cancels print while in procedure
}
if (doing) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Now ");
serialprintPGM(doing == 1 ? PSTR("doing") : PSTR("fresh"));
SERIAL_ECHOLNPAIR(" file: ", path);
}
stopSDPrint();
SdFile *curDir;
const char * const fname = diveToFile(curDir, path, false);
if (!fname) return;
if (read) {
if (file.open(curDir, fname, O_READ)) {
filesize = file.fileSize();
sdpos = 0;
SERIAL_PROTOCOLPAIR(MSG_SD_FILE_OPENED, fname);
SERIAL_PROTOCOLLNPAIR(MSG_SD_SIZE, filesize);
SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
lcd_setstatus(longFilename[0] ? longFilename : fname);
//if (longFilename[0]) {
// SERIAL_PROTOCOLPAIR(MSG_SD_FILE_LONG_NAME, longFilename);
//}
}
else {
SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL();
}
}
else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL();
}
else {
saving = true;
SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, path);
lcd_setstatus(fname);
}
}
}
void CardReader::removeFile(const char * const name) {
if (!cardOK) return;
stopSDPrint();
SdFile *curDir;
const char * const fname = diveToFile(curDir, name, false);
if (!fname) return;
if (file.remove(curDir, fname)) {
SERIAL_PROTOCOLPGM("File deleted:");
SERIAL_PROTOCOLLN(fname);
sdpos = 0;
#if ENABLED(SDCARD_SORT_ALPHA)
presort();
#endif
}
else {
SERIAL_PROTOCOLPGM("Deletion failed, File: ");
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLCHAR('.');
}
}
void CardReader::getStatus() {
if (cardOK && sdprinting) {
SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE);
SERIAL_PROTOCOL(sdpos);
SERIAL_PROTOCOLCHAR('/');
SERIAL_PROTOCOLLN(filesize);
}
else
SERIAL_PROTOCOLLNPGM(MSG_SD_NOT_PRINTING);
}
void CardReader::write_command(char *buf) {
char* begin = buf;
char* npos = NULL;
char* end = buf + strlen(buf) - 1;
file.writeError = false;
if ((npos = strchr(buf, 'N')) != NULL) {
begin = strchr(npos, ' ') + 1;
end = strchr(npos, '*') - 1;
}
end[1] = '\r';
end[2] = '\n';
end[3] = '\0';
file.write(begin);
if (file.writeError) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE);
}
}
//
// Run the next autostart file. Called:
// - On boot after successful card init
// - After finishing the previous autostart file
// - From the LCD command to run the autostart file
//
void CardReader::checkautostart() {
if (autostart_index < 0 || sdprinting) return;
if (!cardOK) initsd();
if (cardOK
#if ENABLED(POWER_LOSS_RECOVERY)
&& !jobRecoverFileExists() // Don't run auto#.g when a resume file exists
#endif
) {
char autoname[10];
sprintf_P(autoname, PSTR("auto%i.g"), int(autostart_index));
dir_t p;
root.rewind();
while (root.readDir(&p, NULL) > 0) {
for (int8_t i = (int8_t)strlen((char*)p.name); i--;) p.name[i] = tolower(p.name[i]);
if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
openAndPrintFile(autoname);
autostart_index++;
return;
}
}
}
autostart_index = -1;
}
void CardReader::beginautostart() {
autostart_index = 0;
setroot();
}
void CardReader::closefile(const bool store_location) {
file.sync();
file.close();
saving = logging = false;
if (store_location) {
//future: store printer state, filename and position for continuing a stopped print
// so one can unplug the printer and continue printing the next day.
}
}
/**
* Get the name of a file in the current directory by index
* with optional name to match.
*/
void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) {
#if ENABLED(SDSORT_CACHE_NAMES)
if (match != NULL) {
while (nr < sort_count) {
if (strcasecmp(match, sortshort[nr]) == 0) break;
nr++;
}
}
if (nr < sort_count) {
strcpy(filename, sortshort[nr]);
strcpy(longFilename, sortnames[nr]);
filenameIsDir = TEST(isDir[nr>>3], nr & 0x07);
return;
}
#endif // SDSORT_CACHE_NAMES
lsAction = LS_GetFilename;
nrFile_index = nr;
workDir.rewind();
lsDive(NULL, workDir, match);
}
uint16_t CardReader::getnrfilenames() {
lsAction = LS_Count;
nrFiles = 0;
workDir.rewind();
lsDive(NULL, workDir);
//SERIAL_ECHOLN(nrFiles);
return nrFiles;
}
/**
* Dive to the given file path, with optional echo.
* On exit set curDir and return the name part of the path.
* A NULL result indicates an unrecoverable error.
*/
const char* CardReader::diveToFile(SdFile*& curDir, const char * const path, const bool echo) {
SdFile myDir;
if (path[0] != '/') { curDir = &workDir; return path; }
curDir = &root;
const char *dirname_start = &path[1];
while (dirname_start) {
char * const dirname_end = strchr(dirname_start, '/');
if (dirname_end <= dirname_start) break;
const uint8_t len = dirname_end - dirname_start;
char dosSubdirname[len + 1];
strncpy(dosSubdirname, dirname_start, len);
dosSubdirname[len] = 0;
if (echo) SERIAL_ECHOLN(dosSubdirname);
if (!myDir.open(curDir, dosSubdirname, O_READ)) {
SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL();
return NULL;
}
curDir = &myDir;
dirname_start = dirname_end + 1;
}
return dirname_start;
}
void CardReader::chdir(const char * relpath) {
SdFile newDir;
SdFile *parent = workDir.isOpen() ? &workDir : &root;
if (newDir.open(parent, relpath, O_READ)) {
workDir = newDir;
if (workDirDepth < MAX_DIR_DEPTH)
workDirParents[workDirDepth++] = workDir;
#if ENABLED(SDCARD_SORT_ALPHA)
presort();
#endif
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
SERIAL_ECHOLN(relpath);
}
}
int8_t CardReader::updir() {
if (workDirDepth > 0) { // At least 1 dir has been saved
workDir = --workDirDepth ? workDirParents[workDirDepth - 1] : root; // Use parent, or root if none
#if ENABLED(SDCARD_SORT_ALPHA)
presort();
#endif
}
return workDirDepth;
}
void CardReader::setroot() {
/*if (!workDir.openRoot(&volume)) {
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
}*/
workDir = root;
#if ENABLED(SDCARD_SORT_ALPHA)
presort();
#endif
}
#if ENABLED(SDCARD_SORT_ALPHA)
/**
* Get the name of a file in the current directory by sort-index
*/
void CardReader::getfilename_sorted(const uint16_t nr) {
getfilename(
#if ENABLED(SDSORT_GCODE)
sort_alpha &&
#endif
(nr < sort_count) ? sort_order[nr] : nr
);
}
/**
* Read all the files and produce a sort key
*
* We can do this in 3 ways...
* - Minimal RAM: Read two filenames at a time sorting along...
* - Some RAM: Buffer the directory just for this sort
* - Most RAM: Buffer the directory and return filenames from RAM
*/
void CardReader::presort() {
// Throw away old sort index
flush_presort();
// Sorting may be turned off
#if ENABLED(SDSORT_GCODE)
if (!sort_alpha) return;
#endif
// If there are files, sort up to the limit
uint16_t fileCnt = getnrfilenames();
if (fileCnt > 0) {
// Never sort more than the max allowed
// If you use folders to organize, 20 may be enough
if (fileCnt > SDSORT_LIMIT) fileCnt = SDSORT_LIMIT;
// Sort order is always needed. May be static or dynamic.
#if ENABLED(SDSORT_DYNAMIC_RAM)
sort_order = new uint8_t[fileCnt];
#endif
// Use RAM to store the entire directory during pre-sort.
// SDSORT_LIMIT should be set to prevent over-allocation.
#if ENABLED(SDSORT_USES_RAM)
// If using dynamic ram for names, allocate on the heap.
#if ENABLED(SDSORT_CACHE_NAMES)
#if ENABLED(SDSORT_DYNAMIC_RAM)
sortshort = new char*[fileCnt];
sortnames = new char*[fileCnt];
#endif
#elif ENABLED(SDSORT_USES_STACK)
char sortnames[fileCnt][SORTED_LONGNAME_MAXLEN];
#endif
// Folder sorting needs 1 bit per entry for flags.
#if HAS_FOLDER_SORTING
#if ENABLED(SDSORT_DYNAMIC_RAM)
isDir = new uint8_t[(fileCnt + 7) >> 3];
#elif ENABLED(SDSORT_USES_STACK)
uint8_t isDir[(fileCnt + 7) >> 3];
#endif
#endif
#else // !SDSORT_USES_RAM
// By default re-read the names from SD for every compare
// retaining only two filenames at a time. This is very
// slow but is safest and uses minimal RAM.
char name1[LONG_FILENAME_LENGTH + 1];
#endif
if (fileCnt > 1) {
// Init sort order.
for (uint16_t i = 0; i < fileCnt; i++) {
sort_order[i] = i;
// If using RAM then read all filenames now.
#if ENABLED(SDSORT_USES_RAM)
getfilename(i);
#if ENABLED(SDSORT_DYNAMIC_RAM)
// Use dynamic method to copy long filename
sortnames[i] = strdup(longest_filename());
#if ENABLED(SDSORT_CACHE_NAMES)
// When caching also store the short name, since
// we're replacing the getfilename() behavior.
sortshort[i] = strdup(filename);
#endif
#else
// Copy filenames into the static array
#if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH
strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN);
sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0';
#else
strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN);
#endif
#if ENABLED(SDSORT_CACHE_NAMES)
strcpy(sortshort[i], filename);
#endif
#endif
// char out[30];
// sprintf_P(out, PSTR("---- %i %s %s"), i, filenameIsDir ? "D" : " ", sortnames[i]);
// SERIAL_ECHOLN(out);
#if HAS_FOLDER_SORTING
const uint16_t bit = i & 0x07, ind = i >> 3;
if (bit == 0) isDir[ind] = 0x00;
if (filenameIsDir) isDir[ind] |= _BV(bit);
#endif
#endif
}
// Bubble Sort
for (uint16_t i = fileCnt; --i;) {
bool didSwap = false;
for (uint16_t j = 0; j < i; ++j) {
const uint16_t o1 = sort_order[j], o2 = sort_order[j + 1];
// Compare names from the array or just the two buffered names
#if ENABLED(SDSORT_USES_RAM)
#define _SORT_CMP_NODIR() (strcasecmp(sortnames[o1], sortnames[o2]) > 0)
#else
#define _SORT_CMP_NODIR() (strcasecmp(name1, name2) > 0)
#endif
#if HAS_FOLDER_SORTING
#if ENABLED(SDSORT_USES_RAM)
// Folder sorting needs an index and bit to test for folder-ness.
const uint8_t ind1 = o1 >> 3, bit1 = o1 & 0x07,
ind2 = o2 >> 3, bit2 = o2 & 0x07;
#define _SORT_CMP_DIR(fs) \
(((isDir[ind1] & _BV(bit1)) != 0) == ((isDir[ind2] & _BV(bit2)) != 0) \
? _SORT_CMP_NODIR() \
: (isDir[fs > 0 ? ind1 : ind2] & (fs > 0 ? _BV(bit1) : _BV(bit2))) != 0)
#else
#define _SORT_CMP_DIR(fs) ((dir1 == filenameIsDir) ? _SORT_CMP_NODIR() : (fs > 0 ? dir1 : !dir1))
#endif
#endif
// The most economical method reads names as-needed
// throughout the loop. Slow if there are many.
#if DISABLED(SDSORT_USES_RAM)
getfilename(o1);
strcpy(name1, longest_filename()); // save (or getfilename below will trounce it)
#if HAS_FOLDER_SORTING
bool dir1 = filenameIsDir;
#endif
getfilename(o2);
char *name2 = longest_filename(); // use the string in-place
#endif // !SDSORT_USES_RAM
// Sort the current pair according to settings.
if (
#if HAS_FOLDER_SORTING
#if ENABLED(SDSORT_GCODE)
sort_folders ? _SORT_CMP_DIR(sort_folders) : _SORT_CMP_NODIR()
#else
_SORT_CMP_DIR(FOLDER_SORTING)
#endif
#else
_SORT_CMP_NODIR()
#endif
) {
sort_order[j] = o2;
sort_order[j + 1] = o1;
didSwap = true;
}
}
if (!didSwap) break;
}
// Using RAM but not keeping names around
#if ENABLED(SDSORT_USES_RAM) && DISABLED(SDSORT_CACHE_NAMES)
#if ENABLED(SDSORT_DYNAMIC_RAM)
for (uint16_t i = 0; i < fileCnt; ++i) free(sortnames[i]);
#if HAS_FOLDER_SORTING
free(isDir);
#endif
#endif
#endif
}
else {
sort_order[0] = 0;
#if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES)
getfilename(0);
#if ENABLED(SDSORT_DYNAMIC_RAM)
sortnames = new char*[1];
sortnames[0] = strdup(longest_filename()); // malloc
#if ENABLED(SDSORT_CACHE_NAMES)
sortshort = new char*[1];
sortshort[0] = strdup(filename); // malloc
#endif
isDir = new uint8_t[1];
#else
#if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH
strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN);
sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0';
#else
strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN);
#endif
#if ENABLED(SDSORT_CACHE_NAMES)
strcpy(sortshort[0], filename);
#endif
#endif
isDir[0] = filenameIsDir ? 0x01 : 0x00;
#endif
}
sort_count = fileCnt;
}
}
void CardReader::flush_presort() {
if (sort_count > 0) {
#if ENABLED(SDSORT_DYNAMIC_RAM)
delete sort_order;
#if ENABLED(SDSORT_CACHE_NAMES)
for (uint8_t i = 0; i < sort_count; ++i) {
free(sortshort[i]); // strdup
free(sortnames[i]); // strdup
}
delete sortshort;
delete sortnames;
#endif
#endif
sort_count = 0;
}
}
#endif // SDCARD_SORT_ALPHA
uint16_t CardReader::get_num_Files() {
return
#if ENABLED(SDCARD_SORT_ALPHA) && SDSORT_USES_RAM && SDSORT_CACHE_NAMES
nrFiles // no need to access the SD card for filenames
#else
getnrfilenames()
#endif
;
}
void CardReader::printingHasFinished() {
planner.synchronize();
file.close();
if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure.
file_subcall_ctr--;
openFile(proc_filenames[file_subcall_ctr], true, true);
setIndex(filespos[file_subcall_ctr]);
startFileprint();
}
else {
sdprinting = false;
#if ENABLED(POWER_LOSS_RECOVERY)
removeJobRecoveryFile();
#endif
#if ENABLED(SD_FINISHED_STEPPERRELEASE) && defined(SD_FINISHED_RELEASECOMMAND)
planner.finish_and_disable();
#endif
print_job_timer.stop();
if (print_job_timer.duration() > 60)
enqueue_and_echo_commands_P(PSTR("M31"));
#if ENABLED(SDCARD_SORT_ALPHA)
presort();
#endif
#if ENABLED(ULTRA_LCD) && ENABLED(LCD_SET_PROGRESS_MANUALLY)
progress_bar_percent = 0;
#endif
#if ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
lcd_reselect_last_file();
#endif
}
}
#if ENABLED(AUTO_REPORT_SD_STATUS)
uint8_t CardReader::auto_report_sd_interval = 0;
millis_t CardReader::next_sd_report_ms;
void CardReader::auto_report_sd_status() {
millis_t current_ms = millis();
if (auto_report_sd_interval && ELAPSED(current_ms, next_sd_report_ms)) {
next_sd_report_ms = current_ms + 1000UL * auto_report_sd_interval;
getStatus();
}
}
#endif // AUTO_REPORT_SD_STATUS
#if ENABLED(POWER_LOSS_RECOVERY)
char job_recovery_file_name[4] = "bin";
void CardReader::openJobRecoveryFile(const bool read) {
if (!cardOK) return;
if (jobRecoveryFile.isOpen()) return;
if (!jobRecoveryFile.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) {
SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL();
}
else if (!read)
SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, job_recovery_file_name);
}
void CardReader::closeJobRecoveryFile() { jobRecoveryFile.close(); }
bool CardReader::jobRecoverFileExists() {
const bool exists = jobRecoveryFile.open(&root, job_recovery_file_name, O_READ);
if (exists) jobRecoveryFile.close();
return exists;
}
int16_t CardReader::saveJobRecoveryInfo() {
jobRecoveryFile.seekSet(0);
const int16_t ret = jobRecoveryFile.write(&job_recovery_info, sizeof(job_recovery_info));
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
if (ret == -1) SERIAL_PROTOCOLLNPGM("Power-loss file write failed.");
#endif
return ret;
}
int16_t CardReader::loadJobRecoveryInfo() {
return jobRecoveryFile.read(&job_recovery_info, sizeof(job_recovery_info));
}
void CardReader::removeJobRecoveryFile() {
job_recovery_info.valid_head = job_recovery_info.valid_foot = job_recovery_commands_count = 0;
if (jobRecoverFileExists()) {
closefile();
removeFile(job_recovery_file_name);
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
SERIAL_PROTOCOLPGM("Power-loss file delete");
serialprintPGM(jobRecoverFileExists() ? PSTR(" failed.\n") : PSTR("d.\n"));
#endif
}
}
#endif // POWER_LOSS_RECOVERY
#endif // SDSUPPORT

230
Marlin/cardreader.h Normal file
View file

@ -0,0 +1,230 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef _CARDREADER_H_
#define _CARDREADER_H_
#include "MarlinConfig.h"
#if ENABLED(SDSUPPORT)
#define SD_RESORT ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_DYNAMIC_RAM)
#define MAX_DIR_DEPTH 10 // Maximum folder depth
#include "SdFile.h"
class CardReader {
public:
CardReader();
void initsd();
void write_command(char *buf);
void beginautostart();
void checkautostart();
void openFile(char * const path, const bool read, const bool subcall=false);
void openLogFile(char * const path);
void removeFile(const char * const name);
void closefile(const bool store_location=false);
void release();
void openAndPrintFile(const char *name);
void startFileprint();
void stopSDPrint(
#if SD_RESORT
const bool re_sort=false
#endif
);
void getStatus();
void printingHasFinished();
void printFilename();
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
void printLongPath(char *path);
#endif
void getfilename(uint16_t nr, const char* const match=NULL);
uint16_t getnrfilenames();
void getAbsFilename(char *t);
void ls();
void chdir(const char *relpath);
int8_t updir();
void setroot();
const char* diveToFile(SdFile*& curDir, const char * const path, const bool echo);
uint16_t get_num_Files();
#if ENABLED(SDCARD_SORT_ALPHA)
void presort();
void getfilename_sorted(const uint16_t nr);
#if ENABLED(SDSORT_GCODE)
FORCE_INLINE void setSortOn(bool b) { sort_alpha = b; presort(); }
FORCE_INLINE void setSortFolders(int i) { sort_folders = i; presort(); }
//FORCE_INLINE void setSortReverse(bool b) { sort_reverse = b; }
#endif
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
void openJobRecoveryFile(const bool read);
void closeJobRecoveryFile();
bool jobRecoverFileExists();
int16_t saveJobRecoveryInfo();
int16_t loadJobRecoveryInfo();
void removeJobRecoveryFile();
#endif
FORCE_INLINE void pauseSDPrint() { sdprinting = false; }
FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
FORCE_INLINE bool eof() { return sdpos >= filesize; }
FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
FORCE_INLINE void setIndex(const uint32_t index) { sdpos = index; file.seekSet(index); }
FORCE_INLINE uint32_t getIndex() { return sdpos; }
FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; }
FORCE_INLINE char* getWorkDirName() { workDir.getFilename(filename); return filename; }
#if ENABLED(AUTO_REPORT_SD_STATUS)
void auto_report_sd_status(void);
FORCE_INLINE void set_auto_report_interval(uint8_t v) {
NOMORE(v, 60);
auto_report_sd_interval = v;
next_sd_report_ms = millis() + 1000UL * v;
}
#endif
FORCE_INLINE char* longest_filename() { return longFilename[0] ? longFilename : filename; }
public:
bool saving, logging, sdprinting, cardOK, filenameIsDir;
char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH];
int8_t autostart_index;
private:
SdFile root, workDir, workDirParents[MAX_DIR_DEPTH];
uint8_t workDirDepth;
// Sort files and folders alphabetically.
#if ENABLED(SDCARD_SORT_ALPHA)
uint16_t sort_count; // Count of sorted items in the current directory
#if ENABLED(SDSORT_GCODE)
bool sort_alpha; // Flag to enable / disable the feature
int sort_folders; // Flag to enable / disable folder sorting
//bool sort_reverse; // Flag to enable / disable reverse sorting
#endif
// By default the sort index is static
#if ENABLED(SDSORT_DYNAMIC_RAM)
uint8_t *sort_order;
#else
uint8_t sort_order[SDSORT_LIMIT];
#endif
#if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
#define SORTED_LONGNAME_MAXLEN ((SDSORT_CACHE_VFATS) * (FILENAME_LENGTH) + 1)
#else
#define SORTED_LONGNAME_MAXLEN LONG_FILENAME_LENGTH
#endif
// Cache filenames to speed up SD menus.
#if ENABLED(SDSORT_USES_RAM)
// If using dynamic ram for names, allocate on the heap.
#if ENABLED(SDSORT_CACHE_NAMES)
#if ENABLED(SDSORT_DYNAMIC_RAM)
char **sortshort, **sortnames;
#else
char sortshort[SDSORT_LIMIT][FILENAME_LENGTH];
char sortnames[SDSORT_LIMIT][SORTED_LONGNAME_MAXLEN];
#endif
#elif DISABLED(SDSORT_USES_STACK)
char sortnames[SDSORT_LIMIT][SORTED_LONGNAME_MAXLEN];
#endif
// Folder sorting uses an isDir array when caching items.
#if HAS_FOLDER_SORTING
#if ENABLED(SDSORT_DYNAMIC_RAM)
uint8_t *isDir;
#elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK)
uint8_t isDir[(SDSORT_LIMIT+7)>>3];
#endif
#endif
#endif // SDSORT_USES_RAM
#endif // SDCARD_SORT_ALPHA
Sd2Card sd2card;
SdVolume volume;
SdFile file;
#if ENABLED(POWER_LOSS_RECOVERY)
SdFile jobRecoveryFile;
#endif
#define SD_PROCEDURE_DEPTH 1
#define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
uint8_t file_subcall_ctr;
uint32_t filespos[SD_PROCEDURE_DEPTH];
char proc_filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
uint32_t filesize, sdpos;
LsAction lsAction; //stored for recursion.
uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
char* diveDirName;
void lsDive(const char *prepend, SdFile parent, const char * const match=NULL);
#if ENABLED(SDCARD_SORT_ALPHA)
void flush_presort();
#endif
#if ENABLED(AUTO_REPORT_SD_STATUS)
static uint8_t auto_report_sd_interval;
static millis_t next_sd_report_ms;
#endif
};
#if PIN_EXISTS(SD_DETECT)
#if ENABLED(SD_DETECT_INVERTED)
#define IS_SD_INSERTED (READ(SD_DETECT_PIN) == HIGH)
#else
#define IS_SD_INSERTED (READ(SD_DETECT_PIN) == LOW)
#endif
#else
// No card detect line? Assume the card is inserted.
#define IS_SD_INSERTED true
#endif
extern CardReader card;
#endif // SDSUPPORT
#if ENABLED(SDSUPPORT)
#define IS_SD_PRINTING (card.sdprinting)
#define IS_SD_FILE_OPEN (card.isFileOpen())
#else
#define IS_SD_PRINTING (false)
#define IS_SD_FILE_OPEN (false)
#endif
#endif // _CARDREADER_H_

145
Marlin/circularqueue.h Normal file
View file

@ -0,0 +1,145 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __CIRCULARQUEUE_H__
#define __CIRCULARQUEUE_H__
#include <Arduino.h>
/**
* @brief Circular Queue class
* @details Implementation of the classic ring buffer data structure
*/
template<typename T, uint8_t N>
class CircularQueue {
private:
/**
* @brief Buffer structure
* @details This structure consolidates all the overhead required to handle
* a circular queue such as the pointers and the buffer vector.
*/
struct buffer_t {
uint8_t head;
uint8_t tail;
uint8_t count;
uint8_t size;
T queue[N];
} buffer;
public:
/**
* @brief Class constructor
* @details This class requires two template parameters, T defines the type
* of item this queue will handle and N defines the maximum number of
* items that can be stored on the queue.
*/
CircularQueue<T, N>() {
this->buffer.size = N;
this->buffer.count = this->buffer.head = this->buffer.tail = 0;
}
/**
* @brief Removes and returns a item from the queue
* @details Removes the oldest item on the queue, pointed to by the
* buffer_t head field. The item is returned to the caller.
* @return type T item
*/
T dequeue() {
if (this->isEmpty()) return T();
uint8_t index = this->buffer.head;
--this->buffer.count;
if (++this->buffer.head == this->buffer.size)
this->buffer.head = 0;
return this->buffer.queue[index];
}
/**
* @brief Adds an item to the queue
* @details Adds an item to the queue on the location pointed by the buffer_t
* tail variable. Returns false if no queue space is available.
* @param item Item to be added to the queue
* @return true if the operation was successful
*/
bool enqueue(T const &item) {
if (this->isFull()) return false;
this->buffer.queue[this->buffer.tail] = item;
++this->buffer.count;
if (++this->buffer.tail == this->buffer.size)
this->buffer.tail = 0;
return true;
}
/**
* @brief Checks if the queue has no items
* @details Returns true if there are no items on the queue, false otherwise.
* @return true if queue is empty
*/
bool isEmpty() {
return this->buffer.count == 0;
}
/**
* @brief Checks if the queue is full
* @details Returns true if the queue is full, false otherwise.
* @return true if queue is full
*/
bool isFull() {
return this->buffer.count == this->buffer.size;
}
/**
* @brief Gets the queue size
* @details Returns the maximum number of items a queue can have.
* @return the queue size
*/
uint8_t size() {
return this->buffer.size;
}
/**
* @brief Gets the next item from the queue without removing it
* @details Returns the next item in the queue without removing it
* or updating the pointers.
* @return first item in the queue
*/
T peek() {
return this->buffer.queue[this->buffer.head];
}
/**
* @brief Gets the number of items on the queue
* @details Returns the current number of items stored on the queue.
* @return number of items in the queue
*/
uint8_t count() {
return this->buffer.count;
}
};
#endif

2790
Marlin/configuration_store.cpp Normal file
View file

File diff suppressed because it is too large Load diff

101
Marlin/configuration_store.h Normal file
View file

@ -0,0 +1,101 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef CONFIGURATION_STORE_H
#define CONFIGURATION_STORE_H
#include "MarlinConfig.h"
class MarlinSettings {
public:
MarlinSettings() { }
static uint16_t datasize();
static void reset();
static bool save(); // Return 'true' if data was saved
FORCE_INLINE static bool init_eeprom() {
reset();
#if ENABLED(EEPROM_SETTINGS)
const bool success = save();
#if ENABLED(EEPROM_CHITCHAT)
if (success) report();
#endif
return success;
#else
return true;
#endif
}
#if ENABLED(EEPROM_SETTINGS)
static bool load(); // Return 'true' if data was loaded ok
static bool validate(); // Return 'true' if EEPROM data is ok
#if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
// That can store is enabled
static uint16_t meshes_start_index();
FORCE_INLINE static uint16_t meshes_end_index() { return meshes_end; }
static uint16_t calc_num_meshes();
static int mesh_slot_offset(const int8_t slot);
static void store_mesh(const int8_t slot);
static void load_mesh(const int8_t slot, void * const into=NULL);
//static void delete_mesh(); // necessary if we have a MAT
//static void defrag_meshes(); // "
#endif
#else
FORCE_INLINE
static bool load() { reset(); report(); return true; }
#endif
#if DISABLED(DISABLE_M503)
static void report(const bool forReplay=false);
#else
FORCE_INLINE
static void report(const bool forReplay=false) { UNUSED(forReplay); }
#endif
private:
static void postprocess();
#if ENABLED(EEPROM_SETTINGS)
static bool eeprom_error, validating;
#if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
// That can store is enabled
static constexpr uint16_t meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always
// live at the very end of the eeprom
#endif
static bool _load();
static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc);
static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc, const bool force=false);
static bool size_error(const uint16_t size);
#endif
};
extern MarlinSettings settings;
#endif // CONFIGURATION_STORE_H

153
Marlin/dac_mcp4728.cpp Normal file
View file

@ -0,0 +1,153 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
*
* For implementation details, please take a look at the datasheet:
* http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
*
* For discussion and feedback, please go to:
* http://arduino.cc/forum/index.php/topic,51842.0.html
*/
#include "MarlinConfig.h"
#if ENABLED(DAC_STEPPER_CURRENT)
#include "dac_mcp4728.h"
#include "enum.h"
uint16_t mcp4728_values[XYZE];
/**
* Begin I2C, get current values (input register and eeprom) of mcp4728
*/
void mcp4728_init() {
Wire.begin();
Wire.requestFrom(int(DAC_DEV_ADDRESS), 24);
while (Wire.available()) {
char deviceID = Wire.read(),
hiByte = Wire.read(),
loByte = Wire.read();
if (!(deviceID & 0x08))
mcp4728_values[(deviceID & 0x30) >> 4] = word((hiByte & 0x0F), loByte);
}
}
/**
* Write input resister value to specified channel using fastwrite method.
* Channel : 0-3, Values : 0-4095
*/
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) {
mcp4728_values[channel] = value;
return mcp4728_fastWrite();
}
/**
* Write all input resistor values to EEPROM using SequencialWrite method.
* This will update both input register and EEPROM value
* This will also write current Vref, PowerDown, Gain settings to EEPROM
*/
uint8_t mcp4728_eepromWrite() {
Wire.beginTransmission(DAC_DEV_ADDRESS);
Wire.write(SEQWRITE);
LOOP_XYZE(i) {
Wire.write(DAC_STEPPER_VREF << 7 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[i]));
Wire.write(lowByte(mcp4728_values[i]));
}
return Wire.endTransmission();
}
/**
* Write Voltage reference setting to all input regiters
*/
uint8_t mcp4728_setVref_all(uint8_t value) {
Wire.beginTransmission(DAC_DEV_ADDRESS);
Wire.write(VREFWRITE | (value ? 0x0F : 0x00));
return Wire.endTransmission();
}
/**
* Write Gain setting to all input regiters
*/
uint8_t mcp4728_setGain_all(uint8_t value) {
Wire.beginTransmission(DAC_DEV_ADDRESS);
Wire.write(GAINWRITE | (value ? 0x0F : 0x00));
return Wire.endTransmission();
}
/**
* Return Input Register value
*/
uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
/**
* Steph: Might be useful in the future
* Return Vout
*
uint16_t mcp4728_getVout(uint8_t channel) {
uint32_t vref = 2048,
vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
if (vOut > defaultVDD) vOut = defaultVDD;
return vOut;
}
*/
/**
* Returns DAC values as a 0-100 percentage of drive strength
*/
uint8_t mcp4728_getDrvPct(uint8_t channel) { return uint8_t(100.0 * mcp4728_values[channel] / (DAC_STEPPER_MAX) + 0.5); }
/**
* Receives all Drive strengths as 0-100 percent values, updates
* DAC Values array and calls fastwrite to update the DAC.
*/
void mcp4728_setDrvPct(uint8_t pct[XYZE]) {
LOOP_XYZE(i) mcp4728_values[i] = 0.01 * pct[i] * (DAC_STEPPER_MAX);
mcp4728_fastWrite();
}
/**
* FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
* DAC Input and PowerDown bits update.
* No EEPROM update
*/
uint8_t mcp4728_fastWrite() {
Wire.beginTransmission(DAC_DEV_ADDRESS);
LOOP_XYZE(i) {
Wire.write(highByte(mcp4728_values[i]));
Wire.write(lowByte(mcp4728_values[i]));
}
return Wire.endTransmission();
}
/**
* Common function for simple general commands
*/
uint8_t mcp4728_simpleCommand(byte simpleCommand) {
Wire.beginTransmission(GENERALCALL);
Wire.write(simpleCommand);
return Wire.endTransmission();
}
#endif // DAC_STEPPER_CURRENT

66
Marlin/dac_mcp4728.h Normal file
View file

@ -0,0 +1,66 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino library for MicroChip MCP4728 I2C D/A converter.
*/
#ifndef DAC_MCP4728_H
#define DAC_MCP4728_H
#include "MarlinConfig.h"
#if ENABLED(DAC_STEPPER_CURRENT)
#include "Wire.h"
#define defaultVDD DAC_STEPPER_MAX //was 5000 but differs with internal Vref
#define BASE_ADDR 0x60
#define RESET 0B00000110
#define WAKE 0B00001001
#define UPDATE 0B00001000
#define MULTIWRITE 0B01000000
#define SINGLEWRITE 0B01011000
#define SEQWRITE 0B01010000
#define VREFWRITE 0B10000000
#define GAINWRITE 0B11000000
#define POWERDOWNWRITE 0B10100000
#define GENERALCALL 0B00000000
#define GAINWRITE 0B11000000
// This is taken from the original lib, makes it easy to edit if needed
// DAC_OR_ADDRESS defined in pins_BOARD.h file
#define DAC_DEV_ADDRESS (BASE_ADDR | DAC_OR_ADDRESS)
void mcp4728_init();
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value);
uint8_t mcp4728_eepromWrite();
uint8_t mcp4728_setVref_all(uint8_t value);
uint8_t mcp4728_setGain_all(uint8_t value);
uint16_t mcp4728_getValue(uint8_t channel);
uint8_t mcp4728_fastWrite();
uint8_t mcp4728_simpleCommand(byte simpleCommand);
uint8_t mcp4728_getDrvPct(uint8_t channel);
void mcp4728_setDrvPct(uint8_t pct[XYZE]);
#endif
#endif // DAC_MCP4728_H

77
Marlin/delay.h Normal file
View file

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* AVR busy wait delay Cycles routines:
*
* DELAY_CYCLES(count): Delay execution in cycles
* DELAY_NS(count): Delay execution in nanoseconds
* DELAY_US(count): Delay execution in microseconds
*/
#ifndef MARLIN_DELAY_H
#define MARLIN_DELAY_H
#define nop() __asm__ __volatile__("nop;\n\t":::)
FORCE_INLINE static void __delay_4cycles(uint8_t cy) {
__asm__ __volatile__(
L("1")
A("dec %[cnt]")
A("nop")
A("brne 1b")
: [cnt] "+r"(cy) // output: +r means input+output
: // input:
: "cc" // clobbers:
);
}
/* ---------------- Delay in cycles */
FORCE_INLINE static void DELAY_CYCLES(uint16_t x) {
if (__builtin_constant_p(x)) {
#define MAXNOPS 4
if (x <= (MAXNOPS)) {
switch (x) { case 4: nop(); case 3: nop(); case 2: nop(); case 1: nop(); }
}
else {
const uint32_t rem = (x) % (MAXNOPS);
switch (rem) { case 3: nop(); case 2: nop(); case 1: nop(); }
if ((x = (x) / (MAXNOPS)))
__delay_4cycles(x); // if need more then 4 nop loop is more optimal
}
#undef MAXNOPS
}
else
__delay_4cycles(x / 4);
}
#undef nop
/* ---------------- Delay in nanoseconds */
#define DELAY_NS(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) / 1000L )
/* ---------------- Delay in microseconds */
#define DELAY_US(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) )
#endif // MARLIN_DELAY_H

106
Marlin/digipot_mcp4018.cpp Normal file
View file

@ -0,0 +1,106 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "MarlinConfig.h"
#if ENABLED(DIGIPOT_I2C) && ENABLED(DIGIPOT_MCP4018)
#include "enum.h"
#include "Stream.h"
#include "utility/twi.h"
#include <SlowSoftI2CMaster.h> //https://github.com/stawel/SlowSoftI2CMaster
// Settings for the I2C based DIGIPOT (MCP4018) based on WT150
#define DIGIPOT_I2C_ADDRESS 0x2F
#define DIGIPOT_A4988_Rsx 0.250
#define DIGIPOT_A4988_Vrefmax 1.666
#define DIGIPOT_A4988_MAX_VALUE 127
#define DIGIPOT_A4988_Itripmax(Vref) ((Vref)/(8.0*DIGIPOT_A4988_Rsx))
#define DIGIPOT_A4988_FACTOR ((DIGIPOT_A4988_MAX_VALUE)/DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax))
#define DIGIPOT_A4988_MAX_CURRENT 2.0
static byte current_to_wiper(const float current) {
const int16_t value = ceil(float(DIGIPOT_A4988_FACTOR) * current);
return byte(constrain(value, 0, DIGIPOT_A4988_MAX_VALUE));
}
const uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = {
DIGIPOTS_I2C_SDA_X
#if DIGIPOT_I2C_NUM_CHANNELS > 1
, DIGIPOTS_I2C_SDA_Y
#if DIGIPOT_I2C_NUM_CHANNELS > 2
, DIGIPOTS_I2C_SDA_Z
#if DIGIPOT_I2C_NUM_CHANNELS > 3
, DIGIPOTS_I2C_SDA_E0
#if DIGIPOT_I2C_NUM_CHANNELS > 4
, DIGIPOTS_I2C_SDA_E1
#endif
#endif
#endif
#endif
};
static SlowSoftI2CMaster pots[DIGIPOT_I2C_NUM_CHANNELS] = {
SlowSoftI2CMaster { sda_pins[X_AXIS], DIGIPOTS_I2C_SCL }
#if DIGIPOT_I2C_NUM_CHANNELS > 1
, SlowSoftI2CMaster { sda_pins[Y_AXIS], DIGIPOTS_I2C_SCL }
#if DIGIPOT_I2C_NUM_CHANNELS > 2
, SlowSoftI2CMaster { sda_pins[Z_AXIS], DIGIPOTS_I2C_SCL }
#if DIGIPOT_I2C_NUM_CHANNELS > 3
, SlowSoftI2CMaster { sda_pins[E_AXIS], DIGIPOTS_I2C_SCL }
#if DIGIPOT_I2C_NUM_CHANNELS > 4
, SlowSoftI2CMaster { sda_pins[E_AXIS + 1], DIGIPOTS_I2C_SCL }
#endif
#endif
#endif
#endif
};
static void i2c_send(const uint8_t channel, const byte v) {
if (WITHIN(channel, 0, DIGIPOT_I2C_NUM_CHANNELS - 1)) {
pots[channel].i2c_start(((DIGIPOT_I2C_ADDRESS) << 1) | I2C_WRITE);
pots[channel].i2c_write(v);
pots[channel].i2c_stop();
}
}
// This is for the MCP4018 I2C based digipot
void digipot_i2c_set_current(uint8_t channel, float current) {
i2c_send(channel, current_to_wiper(MIN(MAX(current, 0), float(DIGIPOT_A4988_MAX_CURRENT))));
}
void digipot_i2c_init() {
static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS;
for (uint8_t i = 0; i < DIGIPOT_I2C_NUM_CHANNELS; i++)
pots[i].i2c_init();
// setup initial currents as defined in Configuration_adv.h
for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++)
digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
}
#endif // DIGIPOT_I2C && DIGIPOT_MCP4018

79
Marlin/digipot_mcp4451.cpp Normal file
View file

@ -0,0 +1,79 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "MarlinConfig.h"
#if ENABLED(DIGIPOT_I2C) && DISABLED(DIGIPOT_MCP4018)
#include "Stream.h"
#include "utility/twi.h"
#include "Wire.h"
// Settings for the I2C based DIGIPOT (MCP4451) on Azteeg X3 Pro
#if MB(5DPRINT)
#define DIGIPOT_I2C_FACTOR 117.96
#define DIGIPOT_I2C_MAX_CURRENT 1.736
#else
#define DIGIPOT_I2C_FACTOR 106.7
#define DIGIPOT_I2C_MAX_CURRENT 2.5
#endif
static byte current_to_wiper(const float current) {
return byte(CEIL(float((DIGIPOT_I2C_FACTOR * current))));
}
static void i2c_send(const byte addr, const byte a, const byte b) {
Wire.beginTransmission(addr);
Wire.write(a);
Wire.write(b);
Wire.endTransmission();
}
// This is for the MCP4451 I2C based digipot
void digipot_i2c_set_current(uint8_t channel, float current) {
current = MIN((float) MAX(current, 0), DIGIPOT_I2C_MAX_CURRENT);
// these addresses are specific to Azteeg X3 Pro, can be set to others,
// In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1
byte addr = 0x2C; // channel 0-3
if (channel >= 4) {
addr = 0x2E; // channel 4-7
channel -= 4;
}
// Initial setup
i2c_send(addr, 0x40, 0xFF);
i2c_send(addr, 0xA0, 0xFF);
// Set actual wiper value
byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 };
i2c_send(addr, addresses[channel], current_to_wiper(current));
}
void digipot_i2c_init() {
static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS;
Wire.begin();
// setup initial currents as defined in Configuration_adv.h
for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++)
digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
}
#endif // DIGIPOT_I2C

1192
Marlin/dogm_bitmaps.h Normal file
View file

File diff suppressed because it is too large Load diff

180
Marlin/dogm_font_data_6x9_marlin.h Normal file
View file

@ -0,0 +1,180 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1
Copyright: Public domain font. Share and enjoy.
Capital A Height: 6, '1' Height: 6
Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 7 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-2 dx= 0 dy= 0
Pure Font ascent = 6 descent=-2
X Font ascent = 6 descent=-2
Max Font ascent = 7 descent=-2
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t u8g_font_6x9[2300] U8G_SECTION(".progmem.u8g_font_6x9") = {
0, 6, 9, 0, 254, 6, 1, 137, 2, 254, 32, 255, 254, 7, 254, 6,
254, 0, 0, 0, 6, 0, 7, 1, 6, 6, 6, 2, 0, 128, 128, 128,
128, 0, 128, 3, 3, 3, 6, 1, 3, 160, 160, 160, 5, 7, 7, 6,
0, 255, 80, 80, 248, 80, 248, 80, 80, 5, 9, 9, 6, 0, 254, 32,
112, 168, 160, 112, 40, 168, 112, 32, 6, 8, 8, 6, 0, 255, 64, 168,
72, 16, 32, 72, 84, 8, 5, 7, 7, 6, 0, 255, 96, 144, 144, 96,
152, 144, 104, 1, 3, 3, 6, 2, 3, 128, 128, 128, 2, 7, 7, 6,
2, 255, 64, 128, 128, 128, 128, 128, 64, 2, 7, 7, 6, 2, 255, 128,
64, 64, 64, 64, 64, 128, 5, 5, 5, 6, 0, 0, 136, 80, 248, 80,
136, 5, 5, 5, 6, 0, 0, 32, 32, 248, 32, 32, 2, 4, 4, 6,
2, 254, 192, 64, 64, 128, 5, 1, 1, 6, 0, 2, 248, 2, 2, 2,
6, 2, 0, 192, 192, 4, 6, 6, 6, 1, 0, 16, 16, 32, 64, 128,
128, 4, 6, 6, 6, 1, 0, 96, 144, 144, 144, 144, 96, 3, 6, 6,
6, 1, 0, 64, 192, 64, 64, 64, 224, 4, 6, 6, 6, 1, 0, 96,
144, 16, 32, 64, 240, 4, 6, 6, 6, 1, 0, 240, 32, 96, 16, 16,
224, 5, 6, 6, 6, 0, 0, 16, 48, 80, 144, 248, 16, 4, 6, 6,
6, 1, 0, 240, 128, 224, 16, 16, 224, 4, 6, 6, 6, 1, 0, 96,
128, 224, 144, 144, 96, 4, 6, 6, 6, 1, 0, 240, 16, 16, 32, 64,
64, 4, 6, 6, 6, 1, 0, 96, 144, 96, 144, 144, 96, 4, 6, 6,
6, 1, 0, 96, 144, 144, 112, 16, 96, 2, 5, 5, 6, 2, 0, 192,
192, 0, 192, 192, 2, 7, 7, 6, 2, 254, 192, 192, 0, 192, 64, 64,
128, 5, 5, 5, 6, 0, 0, 24, 96, 128, 96, 24, 5, 3, 3, 6,
0, 1, 248, 0, 248, 5, 5, 5, 6, 0, 0, 192, 48, 8, 48, 192,
4, 7, 7, 6, 1, 0, 96, 144, 16, 96, 64, 0, 64, 5, 6, 6,
6, 0, 0, 112, 144, 168, 176, 128, 112, 5, 6, 6, 6, 0, 0, 32,
80, 136, 248, 136, 136, 5, 6, 6, 6, 0, 0, 240, 136, 240, 136, 136,
240, 4, 6, 6, 6, 1, 0, 96, 144, 128, 128, 144, 96, 4, 6, 6,
6, 1, 0, 224, 144, 144, 144, 144, 224, 4, 6, 6, 6, 1, 0, 240,
128, 224, 128, 128, 240, 4, 6, 6, 6, 1, 0, 240, 128, 224, 128, 128,
128, 4, 6, 6, 6, 1, 0, 96, 144, 128, 176, 144, 96, 4, 6, 6,
6, 1, 0, 144, 144, 240, 144, 144, 144, 3, 6, 6, 6, 1, 0, 224,
64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 0, 56, 16, 16, 16, 144,
96, 4, 6, 6, 6, 1, 0, 144, 160, 192, 160, 144, 144, 4, 6, 6,
6, 1, 0, 128, 128, 128, 128, 128, 240, 5, 6, 6, 6, 0, 0, 136,
216, 168, 168, 136, 136, 4, 6, 6, 6, 1, 0, 144, 208, 176, 144, 144,
144, 5, 6, 6, 6, 0, 0, 112, 136, 136, 136, 136, 112, 4, 6, 6,
6, 1, 0, 224, 144, 144, 224, 128, 128, 4, 7, 7, 6, 1, 255, 96,
144, 144, 208, 176, 96, 16, 4, 6, 6, 6, 1, 0, 224, 144, 144, 224,
144, 144, 4, 6, 6, 6, 1, 0, 96, 144, 64, 32, 144, 96, 5, 6,
6, 6, 0, 0, 248, 32, 32, 32, 32, 32, 4, 6, 6, 6, 1, 0,
144, 144, 144, 144, 144, 96, 4, 6, 6, 6, 1, 0, 144, 144, 144, 240,
96, 96, 5, 6, 6, 6, 0, 0, 136, 136, 168, 168, 216, 136, 5, 6,
6, 6, 0, 0, 136, 80, 32, 32, 80, 136, 5, 6, 6, 6, 0, 0,
136, 136, 80, 32, 32, 32, 4, 6, 6, 6, 1, 0, 240, 16, 32, 64,
128, 240, 3, 6, 6, 6, 1, 0, 224, 128, 128, 128, 128, 224, 4, 6,
6, 6, 1, 0, 128, 128, 64, 32, 16, 16, 3, 6, 6, 6, 1, 0,
224, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 3, 32, 80, 136, 5,
1, 1, 6, 0, 254, 248, 2, 2, 2, 6, 2, 4, 128, 64, 4, 4,
4, 6, 1, 0, 112, 144, 144, 112, 4, 6, 6, 6, 1, 0, 128, 128,
224, 144, 144, 224, 4, 4, 4, 6, 1, 0, 112, 128, 128, 112, 4, 6,
6, 6, 1, 0, 16, 16, 112, 144, 144, 112, 4, 4, 4, 6, 1, 0,
96, 176, 192, 112, 4, 6, 6, 6, 1, 0, 32, 80, 64, 224, 64, 64,
4, 6, 6, 6, 1, 254, 96, 144, 144, 112, 16, 96, 4, 6, 6, 6,
1, 0, 128, 128, 224, 144, 144, 144, 3, 6, 6, 6, 1, 0, 64, 0,
192, 64, 64, 224, 3, 8, 8, 6, 1, 254, 32, 0, 96, 32, 32, 32,
160, 64, 4, 6, 6, 6, 1, 0, 128, 128, 160, 192, 160, 144, 3, 6,
6, 6, 1, 0, 192, 64, 64, 64, 64, 224, 5, 4, 4, 6, 0, 0,
208, 168, 168, 136, 4, 4, 4, 6, 1, 0, 224, 144, 144, 144, 4, 4,
4, 6, 1, 0, 96, 144, 144, 96, 4, 6, 6, 6, 1, 254, 224, 144,
144, 224, 128, 128, 4, 6, 6, 6, 1, 254, 112, 144, 144, 112, 16, 16,
4, 4, 4, 6, 1, 0, 160, 208, 128, 128, 4, 4, 4, 6, 1, 0,
112, 192, 48, 224, 4, 6, 6, 6, 1, 0, 64, 64, 224, 64, 80, 32,
4, 4, 4, 6, 1, 0, 144, 144, 144, 112, 4, 4, 4, 6, 1, 0,
144, 144, 96, 96, 5, 4, 4, 6, 0, 0, 136, 168, 168, 80, 4, 4,
4, 6, 1, 0, 144, 96, 96, 144, 4, 6, 6, 6, 1, 254, 144, 144,
144, 112, 144, 96, 4, 4, 4, 6, 1, 0, 240, 32, 64, 240, 3, 7,
7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32, 1, 7, 7, 6, 2,
255, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7, 6, 1, 0, 128, 64,
64, 32, 64, 64, 128, 4, 2, 2, 6, 1, 3, 80, 160, 255, 255, 255,
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 0, 0,
0, 6, 0, 7, 1, 6, 6, 6, 2, 0, 128, 0, 128, 128, 128, 128,
4, 6, 6, 6, 1, 255, 32, 112, 160, 160, 112, 32, 5, 7, 7, 6,
0, 255, 48, 72, 64, 240, 64, 64, 248, 5, 5, 5, 6, 0, 0, 168,
80, 136, 80, 168, 5, 6, 6, 6, 0, 0, 136, 80, 248, 32, 248, 32,
1, 7, 7, 6, 2, 255, 128, 128, 128, 0, 128, 128, 128, 4, 7, 7,
6, 1, 255, 112, 128, 96, 144, 96, 16, 224, 3, 1, 1, 6, 1, 5,
160, 6, 7, 7, 6, 0, 0, 120, 132, 148, 164, 148, 132, 120, 3, 5,
5, 6, 1, 1, 96, 160, 96, 0, 224, 5, 5, 5, 6, 0, 0, 40,
80, 160, 80, 40, 4, 3, 3, 6, 1, 0, 240, 16, 16, 4, 1, 1,
6, 1, 2, 240, 6, 7, 7, 6, 0, 0, 120, 132, 180, 164, 164, 132,
120, 4, 1, 1, 6, 1, 5, 240, 4, 3, 3, 6, 1, 2, 96, 144,
96, 5, 7, 7, 6, 0, 255, 32, 32, 248, 32, 32, 0, 248, 3, 5,
5, 6, 1, 1, 64, 160, 32, 64, 224, 3, 5, 5, 6, 1, 1, 192,
32, 64, 32, 192, 2, 2, 2, 6, 2, 4, 64, 128, 4, 5, 5, 6,
1, 255, 144, 144, 176, 208, 128, 5, 6, 6, 6, 0, 0, 120, 232, 232,
104, 40, 40, 1, 1, 1, 6, 2, 2, 128, 2, 2, 2, 6, 2, 254,
64, 128, 3, 5, 5, 6, 1, 1, 64, 192, 64, 64, 224, 3, 5, 5,
6, 1, 1, 64, 160, 64, 0, 224, 5, 5, 5, 6, 0, 0, 160, 80,
40, 80, 160, 5, 8, 8, 6, 0, 255, 64, 192, 64, 80, 112, 48, 120,
16, 5, 8, 8, 6, 0, 255, 64, 192, 64, 80, 104, 8, 16, 56, 5,
8, 8, 6, 0, 255, 192, 32, 64, 48, 240, 48, 120, 16, 4, 7, 7,
6, 1, 0, 32, 0, 32, 96, 128, 144, 96, 5, 7, 7, 6, 0, 0,
64, 32, 32, 80, 112, 136, 136, 5, 7, 7, 6, 0, 0, 16, 32, 32,
80, 112, 136, 136, 5, 7, 7, 6, 0, 0, 32, 80, 32, 80, 112, 136,
136, 5, 7, 7, 6, 0, 0, 40, 80, 32, 80, 112, 136, 136, 5, 7,
7, 6, 0, 0, 80, 0, 32, 80, 112, 136, 136, 5, 7, 7, 6, 0,
0, 32, 80, 32, 80, 112, 136, 136, 5, 6, 6, 6, 0, 0, 120, 160,
240, 160, 160, 184, 4, 8, 8, 6, 1, 254, 96, 144, 128, 128, 144, 96,
32, 64, 4, 7, 7, 6, 1, 0, 64, 32, 240, 128, 224, 128, 240, 4,
7, 7, 6, 1, 0, 32, 64, 240, 128, 224, 128, 240, 4, 7, 7, 6,
1, 0, 32, 80, 240, 128, 224, 128, 240, 4, 7, 7, 6, 1, 0, 80,
0, 240, 128, 224, 128, 240, 3, 7, 7, 6, 1, 0, 128, 64, 224, 64,
64, 64, 224, 3, 7, 7, 6, 1, 0, 32, 64, 224, 64, 64, 64, 224,
3, 7, 7, 6, 1, 0, 64, 160, 224, 64, 64, 64, 224, 3, 7, 7,
6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 6, 6, 6, 0, 0,
112, 72, 232, 72, 72, 112, 4, 7, 7, 6, 1, 0, 80, 160, 144, 208,
176, 144, 144, 4, 7, 7, 6, 1, 0, 64, 32, 96, 144, 144, 144, 96,
4, 7, 7, 6, 1, 0, 32, 64, 96, 144, 144, 144, 96, 4, 7, 7,
6, 1, 0, 32, 80, 96, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0,
80, 160, 96, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 80, 0, 96,
144, 144, 144, 96, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 4,
8, 8, 6, 1, 255, 16, 112, 176, 176, 208, 208, 224, 128, 4, 7, 7,
6, 1, 0, 64, 32, 144, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0,
32, 64, 144, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 80, 144,
144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 80, 0, 144, 144, 144, 144,
96, 5, 7, 7, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 4, 6,
6, 6, 1, 0, 128, 224, 144, 144, 224, 128, 4, 6, 6, 6, 1, 0,
96, 144, 160, 160, 144, 160, 4, 7, 7, 6, 1, 0, 64, 32, 0, 112,
144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 64, 0, 112, 144, 144, 112,
4, 7, 7, 6, 1, 0, 32, 80, 0, 112, 144, 144, 112, 4, 7, 7,
6, 1, 0, 80, 160, 0, 112, 144, 144, 112, 4, 6, 6, 6, 1, 0,
80, 0, 112, 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 80, 32, 112,
144, 144, 112, 5, 4, 4, 6, 0, 0, 112, 168, 176, 120, 4, 6, 6,
6, 1, 254, 112, 128, 128, 112, 32, 64, 4, 7, 7, 6, 1, 0, 64,
32, 0, 96, 176, 192, 112, 4, 7, 7, 6, 1, 0, 32, 64, 0, 96,
176, 192, 112, 4, 7, 7, 6, 1, 0, 32, 80, 0, 96, 176, 192, 112,
4, 6, 6, 6, 1, 0, 80, 0, 96, 176, 192, 112, 3, 7, 7, 6,
1, 0, 128, 64, 0, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 32,
64, 0, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 64, 160, 0, 192,
64, 64, 224, 3, 6, 6, 6, 1, 0, 160, 0, 192, 64, 64, 224, 4,
7, 7, 6, 1, 0, 48, 96, 16, 112, 144, 144, 96, 4, 7, 7, 6,
1, 0, 80, 160, 0, 224, 144, 144, 144, 4, 7, 7, 6, 1, 0, 64,
32, 0, 96, 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 64, 0, 96,
144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 80, 0, 96, 144, 144, 96,
4, 7, 7, 6, 1, 0, 80, 160, 0, 96, 144, 144, 96, 4, 6, 6,
6, 1, 0, 80, 0, 96, 144, 144, 96, 5, 5, 5, 6, 0, 0, 32,
0, 248, 0, 32, 4, 4, 4, 6, 1, 0, 112, 176, 208, 224, 4, 7,
7, 6, 1, 0, 64, 32, 0, 144, 144, 144, 112, 4, 7, 7, 6, 1,
0, 32, 64, 0, 144, 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 80,
0, 144, 144, 144, 112, 4, 6, 6, 6, 1, 0, 80, 0, 144, 144, 144,
112, 4, 9, 9, 6, 1, 254, 32, 64, 0, 144, 144, 144, 112, 144, 96,
4, 8, 8, 6, 1, 254, 128, 128, 224, 144, 144, 224, 128, 128, 4, 8,
8, 6, 1, 254, 80, 0, 144, 144, 144, 112, 144, 96
};

194
Marlin/dogm_font_data_HD44780_C.h Normal file
View file

@ -0,0 +1,194 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: HD44780_C v1.2
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 8 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 8
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t HD44780_C_5x7[2522] U8G_SECTION(".progmem.HD44780_C_5x7") = {
0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 255, 7,
255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 3, 7, 7,
6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4,
32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5,
128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7,
6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0,
112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136,
136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7,
6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255,
112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200,
136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7,
7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1,
0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168,
168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5,
5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240,
136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8,
8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6,
0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224,
64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5,
5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0,
136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136,
5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6,
0, 0, 248, 16, 32, 64, 248, 5, 5, 5, 6, 0, 2, 184, 168, 168,
168, 184, 5, 5, 5, 6, 0, 2, 184, 136, 184, 160, 184, 5, 5, 5,
6, 0, 2, 184, 160, 184, 136, 184, 5, 6, 6, 6, 0, 1, 8, 40,
72, 248, 64, 32, 5, 5, 5, 6, 0, 0, 56, 112, 224, 136, 240, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5,
7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240, 5, 7, 7, 6,
0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 80,
0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112,
168, 168, 168, 5, 7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240,
5, 7, 7, 6, 0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8,
6, 0, 0, 80, 32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0,
0, 120, 40, 40, 40, 40, 168, 72, 5, 7, 7, 6, 0, 0, 248, 136,
136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136, 80, 32,
64, 128, 5, 7, 7, 6, 0, 0, 32, 112, 168, 168, 168, 112, 32, 5,
7, 7, 6, 0, 0, 136, 136, 136, 120, 8, 8, 8, 5, 7, 7, 6,
0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 7, 7, 6, 0, 0, 192,
64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200,
168, 168, 200, 5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112,
5, 7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7,
6, 0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0,
24, 96, 128, 240, 136, 136, 112, 4, 5, 5, 6, 0, 0, 224, 144, 224,
144, 224, 5, 5, 5, 6, 0, 0, 248, 136, 128, 128, 128, 5, 7, 7,
6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6, 0, 0,
168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48, 8, 240,
5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7, 6, 0,
0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0, 144, 160,
192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72, 5, 5,
5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0, 0, 136,
136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5,
5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 5, 5, 6, 0, 0,
136, 136, 120, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168, 168, 168, 248,
5, 5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0,
0, 136, 136, 200, 168, 200, 4, 5, 5, 6, 0, 0, 128, 128, 224, 144,
224, 5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6,
0, 0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120,
40, 72, 5, 5, 5, 6, 0, 1, 32, 72, 144, 72, 32, 5, 5, 5,
6, 0, 1, 32, 144, 72, 144, 32, 5, 3, 3, 6, 0, 0, 72, 144,
216, 5, 3, 3, 6, 0, 4, 216, 72, 144, 5, 7, 7, 6, 0, 0,
144, 208, 176, 144, 56, 40, 56, 5, 7, 7, 6, 0, 0, 32, 0, 32,
64, 128, 136, 112, 5, 7, 7, 6, 0, 0, 24, 32, 32, 112, 32, 32,
192, 5, 7, 7, 6, 0, 0, 32, 80, 64, 240, 64, 64, 120, 1, 2,
2, 6, 2, 0, 128, 128, 1, 4, 4, 6, 2, 0, 128, 128, 128, 128,
3, 5, 5, 6, 1, 0, 160, 160, 160, 0, 224, 3, 5, 5, 6, 1,
0, 160, 160, 160, 0, 160, 5, 7, 7, 6, 0, 0, 160, 0, 232, 16,
32, 64, 128, 5, 5, 5, 6, 0, 1, 216, 112, 32, 112, 216, 5, 7,
7, 6, 0, 0, 160, 64, 168, 16, 32, 64, 128, 3, 6, 6, 6, 1,
1, 224, 64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 1, 248, 80, 80,
80, 80, 248, 5, 7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32,
5, 7, 7, 6, 0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 7, 7,
6, 0, 0, 128, 144, 176, 248, 176, 144, 128, 5, 7, 7, 6, 0, 0,
8, 72, 104, 248, 104, 72, 8, 5, 7, 7, 6, 0, 0, 128, 136, 168,
248, 168, 136, 128, 5, 7, 7, 6, 0, 0, 128, 224, 136, 16, 32, 64,
128, 2, 2, 2, 6, 2, 2, 192, 192, 5, 8, 8, 6, 0, 255, 120,
40, 40, 40, 72, 136, 248, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136,
136, 136, 136, 248, 8, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168,
168, 248, 8, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248, 136, 5,
7, 7, 6, 0, 255, 32, 32, 112, 168, 168, 112, 32, 5, 6, 6, 6,
0, 255, 136, 136, 136, 136, 248, 8, 5, 6, 6, 6, 0, 255, 168, 168,
168, 168, 248, 8, 2, 2, 2, 6, 2, 6, 64, 128, 3, 1, 1, 6,
1, 7, 160, 5, 2, 2, 6, 0, 6, 72, 176, 5, 8, 8, 6, 0,
0, 16, 32, 0, 112, 136, 248, 128, 112, 5, 6, 6, 6, 0, 255, 112,
128, 136, 112, 32, 96, 3, 7, 7, 6, 1, 0, 160, 0, 160, 160, 160,
32, 192, 5, 6, 6, 6, 0, 1, 32, 112, 112, 112, 248, 32, 5, 5,
5, 6, 0, 1, 80, 0, 136, 0, 80, 5, 5, 5, 6, 0, 1, 112,
136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8,
8, 5, 7, 7, 6, 0, 0, 136, 144, 184, 72, 184, 8, 56, 5, 7,
7, 6, 0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0,
0, 192, 64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 136,
248, 136, 248, 136, 248, 136, 4, 5, 5, 6, 0, 2, 192, 0, 48, 0,
96, 5, 8, 8, 6, 0, 0, 64, 160, 224, 168, 8, 40, 120, 32, 5,
8, 8, 6, 0, 0, 64, 112, 64, 120, 64, 112, 64, 224, 5, 8, 8,
6, 0, 0, 32, 112, 32, 248, 32, 112, 32, 112, 5, 7, 7, 6, 0,
0, 104, 0, 232, 0, 104, 16, 56, 5, 8, 8, 6, 0, 0, 16, 112,
16, 240, 16, 112, 16, 56, 5, 7, 7, 6, 0, 1, 32, 112, 32, 248,
32, 112, 32, 5, 8, 8, 6, 0, 0, 16, 144, 80, 48, 80, 144, 16,
56, 5, 8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5,
7, 7, 6, 0, 0, 120, 168, 168, 120, 40, 40, 40, 5, 8, 8, 6,
0, 0, 248, 248, 248, 248, 248, 248, 248, 248
};

192
Marlin/dogm_font_data_HD44780_J.h Normal file
View file

@ -0,0 +1,192 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: HD44780_J
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 6 h=10 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-2 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-2
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t HD44780_J_5x7[2492] U8G_SECTION(".progmem.HD44780_J_5x7") = {
0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 254, 7,
255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248, 32, 32, 3, 7, 7,
6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4,
32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5,
128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7,
6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0,
112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136,
136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7,
6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255,
112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200,
136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7,
7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1,
0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168,
168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5,
5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240,
136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8,
8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6,
0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224,
64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5,
5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0,
136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136,
5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6,
0, 0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64,
128, 64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128,
128, 3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 5,
5, 6, 0, 1, 32, 16, 248, 16, 32, 5, 5, 5, 6, 0, 1, 32,
64, 248, 64, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 3, 3, 3, 6, 0, 0,
224, 160, 224, 3, 4, 4, 6, 2, 3, 224, 128, 128, 128, 3, 4, 4,
6, 0, 0, 32, 32, 32, 224, 3, 3, 3, 6, 0, 0, 128, 64, 32,
2, 2, 2, 6, 1, 2, 192, 192, 5, 6, 6, 6, 0, 0, 248, 8,
248, 8, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 48, 32, 64, 4,
5, 5, 6, 0, 0, 16, 32, 96, 160, 32, 5, 5, 5, 6, 0, 0,
32, 248, 136, 8, 48, 5, 4, 4, 6, 0, 0, 248, 32, 32, 248, 5,
5, 5, 6, 0, 0, 16, 248, 48, 80, 144, 5, 5, 5, 6, 0, 0,
64, 248, 72, 80, 64, 5, 4, 4, 6, 0, 0, 112, 16, 16, 248, 4,
5, 5, 6, 0, 0, 240, 16, 240, 16, 240, 5, 4, 4, 6, 0, 0,
168, 168, 8, 48, 5, 1, 1, 6, 0, 3, 248, 5, 7, 7, 6, 0,
0, 248, 8, 40, 48, 32, 32, 64, 5, 7, 7, 6, 0, 0, 8, 16,
32, 96, 160, 32, 32, 5, 7, 7, 6, 0, 0, 32, 248, 136, 136, 8,
16, 32, 5, 6, 6, 6, 0, 0, 248, 32, 32, 32, 32, 248, 5, 7,
7, 6, 0, 0, 16, 248, 16, 48, 80, 144, 16, 5, 7, 7, 6, 0,
0, 64, 248, 72, 72, 72, 72, 144, 5, 7, 7, 6, 0, 0, 32, 248,
32, 248, 32, 32, 32, 5, 6, 6, 6, 0, 0, 120, 72, 136, 8, 16,
96, 5, 7, 7, 6, 0, 0, 64, 120, 144, 16, 16, 16, 32, 5, 6,
6, 6, 0, 0, 248, 8, 8, 8, 8, 248, 5, 7, 7, 6, 0, 0,
80, 248, 80, 80, 16, 32, 64, 5, 6, 6, 6, 0, 0, 192, 8, 200,
8, 16, 224, 5, 6, 6, 6, 0, 0, 248, 8, 16, 32, 80, 136, 5,
7, 7, 6, 0, 0, 64, 248, 72, 80, 64, 64, 56, 5, 6, 6, 6,
0, 0, 136, 136, 72, 8, 16, 96, 5, 6, 6, 6, 0, 0, 120, 72,
168, 24, 16, 96, 5, 7, 7, 6, 0, 0, 16, 224, 32, 248, 32, 32,
64, 5, 6, 6, 6, 0, 0, 168, 168, 168, 8, 16, 32, 5, 7, 7,
6, 0, 0, 112, 0, 248, 32, 32, 32, 64, 3, 7, 7, 6, 1, 0,
128, 128, 128, 192, 160, 128, 128, 5, 7, 7, 6, 0, 0, 32, 32, 248,
32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 112, 0, 0, 0, 0, 248,
5, 6, 6, 6, 0, 0, 248, 8, 80, 32, 80, 128, 5, 7, 7, 6,
0, 0, 32, 248, 16, 32, 112, 168, 32, 3, 7, 7, 6, 1, 0, 32,
32, 32, 32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 32, 16, 136, 136,
136, 136, 5, 7, 7, 6, 0, 0, 128, 128, 248, 128, 128, 128, 120, 5,
6, 6, 6, 0, 0, 248, 8, 8, 8, 16, 96, 5, 5, 5, 6, 0,
1, 64, 160, 16, 8, 8, 5, 7, 7, 6, 0, 0, 32, 248, 32, 32,
168, 168, 32, 5, 6, 6, 6, 0, 0, 248, 8, 8, 80, 32, 16, 4,
6, 6, 6, 1, 0, 224, 0, 224, 0, 224, 16, 5, 6, 6, 6, 0,
0, 32, 64, 128, 136, 248, 8, 5, 6, 6, 6, 0, 0, 8, 8, 80,
32, 80, 128, 5, 6, 6, 6, 0, 0, 248, 64, 248, 64, 64, 56, 5,
7, 7, 6, 0, 0, 64, 64, 248, 72, 80, 64, 64, 5, 7, 7, 6,
0, 0, 112, 16, 16, 16, 16, 16, 248, 5, 6, 6, 6, 0, 0, 248,
8, 248, 8, 8, 248, 5, 7, 7, 6, 0, 0, 112, 0, 248, 8, 8,
16, 32, 4, 7, 7, 6, 0, 0, 144, 144, 144, 144, 16, 32, 64, 5,
6, 6, 6, 0, 0, 32, 160, 160, 168, 168, 176, 5, 7, 7, 6, 0,
0, 128, 128, 128, 136, 144, 160, 192, 5, 6, 6, 6, 0, 0, 248, 136,
136, 136, 136, 248, 5, 6, 6, 6, 0, 0, 248, 136, 136, 8, 16, 32,
5, 6, 6, 6, 0, 0, 192, 0, 8, 8, 16, 224, 4, 3, 3, 6,
0, 4, 32, 144, 64, 3, 3, 3, 6, 0, 4, 224, 160, 224, 5, 5,
5, 6, 0, 1, 72, 168, 144, 144, 104, 5, 7, 7, 6, 0, 0, 80,
0, 112, 8, 120, 136, 120, 4, 8, 8, 6, 1, 255, 96, 144, 144, 224,
144, 144, 224, 128, 5, 5, 5, 6, 0, 0, 112, 128, 96, 136, 112, 5,
6, 6, 6, 0, 255, 136, 136, 152, 232, 136, 128, 5, 5, 5, 6, 0,
0, 120, 160, 144, 136, 112, 5, 7, 7, 6, 0, 254, 48, 72, 136, 136,
240, 128, 128, 5, 8, 8, 6, 0, 254, 120, 136, 136, 136, 120, 8, 8,
112, 5, 5, 5, 6, 0, 1, 56, 32, 32, 160, 64, 4, 3, 3, 6,
0, 3, 16, 208, 16, 4, 8, 8, 6, 0, 255, 16, 0, 48, 16, 16,
16, 144, 96, 3, 3, 3, 6, 0, 4, 160, 64, 160, 5, 7, 7, 6,
0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7, 6, 0, 0, 64,
64, 224, 64, 224, 64, 120, 5, 7, 7, 6, 0, 0, 112, 0, 176, 200,
136, 136, 136, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136, 112,
5, 7, 7, 6, 0, 255, 176, 200, 136, 136, 240, 128, 128, 5, 7, 7,
6, 0, 255, 104, 152, 136, 136, 120, 8, 8, 5, 6, 6, 6, 0, 0,
112, 136, 248, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88, 168, 208, 5,
5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6, 0, 0,
80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 248, 128, 64,
32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 248, 80, 80, 80, 152, 5,
7, 7, 6, 0, 0, 248, 0, 136, 80, 32, 80, 136, 5, 7, 7, 6,
0, 255, 136, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0, 8,
240, 32, 248, 32, 32, 5, 5, 5, 6, 0, 0, 248, 64, 120, 72, 136,
5, 5, 5, 6, 0, 0, 248, 168, 248, 136, 136, 5, 5, 5, 6, 0,
1, 32, 0, 248, 0, 32, 0, 0, 0, 6, 0, 0, 6, 10, 10, 6,
0, 254, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252
};

226
Marlin/dogm_font_data_HD44780_W.h Normal file
View file

@ -0,0 +1,226 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: HD44780_W
Copyright: A.Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t HD44780_W_5x7[3034] U8G_SECTION(".progmem.HD44780_W_5x7") = {
0, 6, 9, 0, 254, 7, 2, 79, 3, 222, 16, 255, 255, 8, 255, 7,
255, 4, 7, 7, 6, 0, 0, 16, 48, 112, 240, 112, 48, 16, 4, 7,
7, 6, 1, 0, 128, 192, 224, 240, 224, 192, 128, 5, 3, 3, 6, 0,
4, 216, 72, 144, 5, 3, 3, 6, 0, 4, 216, 144, 72, 5, 7, 7,
6, 0, 0, 32, 112, 248, 0, 32, 112, 248, 5, 7, 7, 6, 0, 0,
248, 112, 32, 0, 248, 112, 32, 5, 5, 5, 6, 0, 1, 112, 248, 248,
248, 112, 5, 7, 7, 6, 0, 0, 8, 8, 40, 72, 248, 64, 32, 5,
7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32, 5, 7, 7, 6,
0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 5, 5, 6, 0, 1, 32,
64, 248, 64, 32, 5, 5, 5, 6, 0, 1, 32, 16, 248, 16, 32, 5,
7, 7, 6, 0, 0, 16, 32, 64, 32, 16, 0, 248, 5, 7, 7, 6,
0, 0, 64, 32, 16, 32, 64, 0, 248, 5, 5, 5, 6, 0, 1, 32,
32, 112, 112, 248, 5, 5, 5, 6, 0, 0, 248, 112, 112, 32, 32, 0,
0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128,
0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, 0, 0,
80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, 120, 160,
112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, 64, 152,
24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, 2, 3,
3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, 64, 128,
128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, 32, 64,
128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, 5, 6,
0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, 64, 128,
5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, 192, 5,
5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0,
112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, 192, 64,
64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, 128, 128,
248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, 5, 7,
7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, 6, 0,
0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, 48, 64,
128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 32,
32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, 112, 5,
7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, 5, 6,
2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, 192, 0,
192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, 32, 16,
5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, 0, 128,
64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, 8, 16,
32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, 112, 5,
7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6,
0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0, 112,
136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, 136, 136,
136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 248,
5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, 7, 7,
6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, 0, 0,
136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, 16, 144,
96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, 5, 7,
7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, 6, 0,
0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136,
200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 136,
136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, 128, 5,
7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, 7, 6,
0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120,
128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, 32, 32,
32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 136, 112,
5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, 7, 7,
6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, 0, 0,
136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136,
80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 64, 128,
248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, 5, 5,
5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1, 0, 224,
32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80, 136, 5,
1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64, 5, 5,
5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 128,
128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128, 128, 136,
112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120, 5, 5,
5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0, 0, 48,
72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136, 136, 120,
8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136, 136, 1,
7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8, 8, 6,
1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6, 0, 0,
128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192, 64, 64,
64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168, 168, 5,
5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6, 0, 0,
112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136, 240, 128,
128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5, 5, 5,
6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128,
112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64, 72, 48,
5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5, 6, 0,
0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136, 168, 168,
80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6, 6, 6,
0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0, 248, 16,
32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32,
1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7,
6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 6, 6, 6, 0, 1,
8, 40, 72, 248, 64, 32, 5, 7, 7, 6, 0, 0, 32, 80, 136, 136,
136, 136, 248, 5, 7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240,
5, 8, 8, 6, 0, 255, 120, 40, 40, 40, 72, 136, 248, 136, 5, 7,
7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5, 7, 7, 6, 0,
0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 136, 136,
152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80, 32, 136, 152, 168,
168, 200, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168, 72,
5, 7, 7, 6, 0, 0, 248, 136, 136, 136, 136, 136, 136, 5, 7, 7,
6, 0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 8, 8, 6, 0, 255,
136, 136, 136, 136, 136, 136, 248, 8, 5, 7, 7, 6, 0, 0, 136, 136,
136, 120, 8, 8, 8, 5, 7, 7, 6, 0, 0, 168, 168, 168, 168, 168,
168, 248, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168, 168, 248, 8,
5, 7, 7, 6, 0, 0, 192, 64, 64, 112, 72, 72, 112, 5, 7, 7,
6, 0, 0, 136, 136, 136, 200, 168, 168, 200, 5, 7, 7, 6, 0, 0,
112, 136, 40, 80, 8, 136, 112, 5, 5, 5, 6, 0, 0, 64, 160, 144,
144, 104, 5, 7, 7, 6, 0, 0, 32, 48, 40, 40, 32, 224, 224, 5,
7, 7, 6, 0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 5, 5, 6,
0, 0, 248, 80, 80, 80, 152, 5, 7, 7, 6, 0, 0, 248, 128, 64,
32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 120, 144, 144, 144, 96, 5,
7, 7, 6, 0, 0, 48, 40, 56, 40, 200, 216, 24, 5, 6, 6, 6,
0, 0, 8, 112, 160, 32, 32, 16, 5, 6, 6, 6, 0, 1, 32, 112,
112, 112, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136,
112, 5, 5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6,
0, 0, 48, 72, 32, 80, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88,
168, 208, 5, 6, 6, 6, 0, 0, 80, 248, 248, 248, 112, 32, 5, 5,
5, 6, 0, 0, 112, 128, 96, 136, 112, 5, 7, 7, 6, 0, 0, 112,
136, 136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 216, 216, 216, 216,
216, 216, 216, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7,
6, 0, 0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0,
136, 112, 80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248,
32, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5,
8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5, 7, 7,
6, 0, 0, 24, 32, 32, 112, 32, 32, 192, 5, 7, 7, 6, 0, 0,
248, 136, 184, 184, 184, 136, 248, 5, 7, 7, 6, 0, 0, 112, 8, 120,
136, 120, 0, 248, 5, 5, 5, 6, 0, 1, 40, 80, 160, 80, 40, 5,
7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6,
0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0, 248,
136, 168, 136, 152, 168, 248, 2, 3, 3, 6, 2, 4, 64, 128, 192, 4,
5, 5, 6, 0, 3, 96, 144, 144, 144, 96, 5, 7, 7, 6, 0, 0,
32, 32, 248, 32, 32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32,
64, 240, 3, 5, 5, 6, 0, 3, 224, 32, 224, 32, 224, 5, 8, 8,
6, 0, 0, 224, 144, 224, 128, 144, 184, 144, 24, 5, 8, 8, 6, 0,
255, 136, 136, 136, 136, 152, 232, 128, 128, 5, 7, 7, 6, 0, 0, 120,
152, 152, 120, 24, 24, 24, 2, 2, 2, 6, 2, 2, 192, 192, 5, 5,
5, 6, 0, 0, 80, 136, 168, 168, 80, 3, 5, 5, 6, 0, 3, 64,
192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 112, 0,
248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5, 7, 7, 6,
0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6, 0, 0, 136,
144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192, 64, 192, 72,
216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32, 64, 128, 136,
112, 5, 8, 8, 6, 0, 0, 64, 32, 32, 80, 136, 248, 136, 136, 5,
8, 8, 6, 0, 0, 16, 32, 32, 80, 136, 248, 136, 136, 5, 8, 8,
6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0,
0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 80,
0, 32, 80, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 32, 80, 32,
112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96, 160, 184, 224,
160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136, 112, 32, 96,
5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128, 248, 5, 8,
8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5, 8, 8, 6,
0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0,
80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0, 128, 64, 0,
224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64, 0, 224, 64,
64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224, 64, 64, 64,
224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 7,
7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8, 8, 6, 0,
0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6, 0, 0, 64,
32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 112,
136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136,
136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 136, 136, 136,
112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136, 136, 112, 5,
5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 7, 7, 6, 0, 0,
112, 32, 112, 168, 112, 32, 112, 5, 8, 8, 6, 0, 0, 64, 32, 136,
136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 136, 136,
136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136, 136, 136,
112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136, 136, 136, 112, 5,
8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 32, 5, 8, 8,
6, 0, 0, 192, 64, 112, 72, 72, 112, 64, 224, 5, 7, 7, 6, 0,
0, 48, 72, 72, 112, 72, 72, 176, 5, 8, 8, 6, 0, 0, 64, 32,
0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112,
8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 8, 120,
136, 120, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 8, 120, 136, 120,
5, 7, 7, 6, 0, 0, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8,
6, 0, 0, 32, 80, 32, 112, 8, 120, 136, 120, 5, 6, 6, 6, 0,
0, 208, 40, 120, 160, 168, 80, 5, 6, 6, 6, 0, 255, 112, 128, 136,
112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128,
112, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 128, 112, 5,
8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 128, 112, 5, 7, 7,
6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 3, 8, 8, 6, 1, 0,
128, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64,
0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 64,
192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 64, 192, 64, 64,
224, 5, 7, 7, 6, 0, 0, 160, 64, 160, 16, 120, 136, 112, 5, 8,
8, 6, 0, 0, 104, 144, 0, 176, 200, 136, 136, 136, 5, 8, 8, 6,
0, 0, 64, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0,
16, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80,
0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112,
136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136,
112, 5, 5, 5, 6, 0, 1, 32, 0, 248, 0, 32, 5, 7, 7, 6,
0, 0, 16, 32, 112, 168, 112, 32, 64, 5, 8, 8, 6, 0, 0, 64,
32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 16, 32, 0,
136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136,
136, 152, 104, 5, 7, 7, 6, 0, 0, 80, 0, 136, 136, 136, 152, 104,
5, 9, 9, 6, 0, 255, 16, 32, 0, 136, 136, 136, 248, 8, 112, 4,
7, 7, 6, 1, 0, 192, 64, 96, 80, 96, 64, 224, 5, 8, 8, 6,
0, 255, 80, 0, 136, 136, 136, 248, 8, 112
};

286
Marlin/dogm_font_data_ISO10646_1.h Normal file
View file

@ -0,0 +1,286 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: ISO10646-1
Copyright: A.Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
#if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7)
//
// Reduced font (only symbols 32 - 127) - About 1400 bytes smaller
//
const u8g_fntpgm_uint8_t ISO10646_1_5x7[] U8G_SECTION(".progmem.ISO10646_1_5x7") = {
0,6,9,0,254,7,1,146,3,33,32,127,255,7,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
6,0,2,104,144,0,0,0,6,0,0};
#else
//
// Extended (original) font (symbols 32 - 255)
//
const u8g_fntpgm_uint8_t ISO10646_1_5x7[] U8G_SECTION(".progmem.ISO10646_1_5x7") = {
0, 6, 9, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 8, 255, 7,
255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
0, 0, 112, 136, 136, 136, 136, 136, 112, 3, 7, 7, 6, 1, 0, 64,
192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5,
5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168,
168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5,
7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6,
0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240,
136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128,
5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7,
6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0,
128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16,
16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144,
136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7,
7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0,
0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136,
136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5,
7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6,
0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248,
32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136,
136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32,
5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7,
6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0,
136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128,
224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6,
1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32,
80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128,
64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6,
0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112,
128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136,
120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6,
0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112,
136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136,
136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3,
8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7,
6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0,
192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168,
168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5,
6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136,
136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8,
5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0,
0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64,
64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5,
5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136,
136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5,
6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0,
0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128,
64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128,
3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2,
6, 0, 2, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
0, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 5, 7,
7, 6, 0, 0, 32, 112, 168, 160, 168, 112, 32, 5, 7, 7, 6, 0,
0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0, 136, 112,
80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 32, 248, 32, 248, 32,
1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5, 8, 8,
6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 3, 1, 1, 6, 1,
7, 160, 5, 7, 7, 6, 0, 0, 248, 136, 184, 184, 184, 136, 248, 5,
7, 7, 6, 0, 1, 112, 8, 120, 136, 120, 0, 248, 5, 5, 5, 6,
0, 1, 40, 80, 160, 80, 40, 5, 3, 3, 6, 0, 1, 248, 8, 8,
2, 2, 2, 6, 2, 6, 64, 128, 5, 7, 7, 6, 0, 0, 248, 136,
168, 136, 152, 168, 248, 5, 1, 1, 6, 0, 6, 248, 4, 4, 4, 6,
0, 3, 96, 144, 144, 96, 5, 7, 7, 6, 0, 0, 32, 32, 248, 32,
32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32, 64, 240, 3, 5,
5, 6, 0, 3, 224, 32, 224, 32, 224, 2, 2, 2, 6, 2, 6, 64,
128, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 152, 232, 128, 128, 5,
7, 7, 6, 0, 0, 120, 152, 152, 120, 24, 24, 24, 2, 2, 2, 6,
2, 2, 192, 192, 2, 2, 2, 6, 2, 255, 64, 128, 3, 5, 5, 6,
0, 3, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 1, 112, 136, 136,
136, 112, 0, 248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5,
7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6,
0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192,
64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32,
64, 128, 136, 112, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248,
136, 136, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 136, 136,
5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8,
8, 6, 0, 0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6,
0, 0, 80, 0, 112, 136, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0,
32, 80, 32, 112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96,
160, 184, 224, 160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136,
112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128,
248, 5, 8, 8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5,
8, 8, 6, 0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7,
6, 0, 0, 80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0,
128, 64, 0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64,
0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224,
64, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64,
224, 5, 7, 7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8,
8, 6, 0, 0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6,
0, 0, 64, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0,
16, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80,
0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112,
136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136,
136, 112, 5, 5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 8, 8,
6, 0, 255, 16, 112, 168, 168, 168, 168, 112, 64, 5, 8, 8, 6, 0,
0, 64, 32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16,
32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0,
136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136,
136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32,
32, 5, 9, 9, 6, 0, 255, 192, 64, 112, 72, 72, 112, 64, 64, 224,
4, 8, 8, 6, 1, 255, 96, 144, 144, 160, 144, 144, 224, 128, 5, 8,
8, 6, 0, 0, 64, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6,
0, 0, 16, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0,
32, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 104, 144,
0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 80, 0, 112, 8,
120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 32, 112, 8, 120, 136,
120, 5, 6, 6, 6, 0, 0, 208, 40, 120, 160, 168, 80, 5, 6, 6,
6, 0, 255, 112, 128, 136, 112, 32, 96, 5, 8, 8, 6, 0, 0, 64,
32, 0, 112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 16, 32, 0,
112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136,
248, 128, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112,
3, 8, 8, 6, 1, 0, 128, 64, 0, 64, 192, 64, 64, 224, 3, 8,
8, 6, 1, 0, 32, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6,
1, 0, 64, 160, 0, 64, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0,
160, 0, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 160, 64, 160,
16, 120, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 176, 200, 136,
136, 136, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 136, 136, 112,
5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 136, 136, 112, 5, 8,
8, 6, 0, 0, 32, 80, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6,
0, 0, 104, 144, 0, 112, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0,
80, 0, 112, 136, 136, 136, 112, 5, 5, 5, 6, 0, 1, 32, 0, 248,
0, 32, 5, 7, 7, 6, 0, 255, 16, 112, 168, 168, 168, 112, 64, 5,
8, 8, 6, 0, 0, 64, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8,
6, 0, 0, 16, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0,
0, 32, 80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 80,
0, 136, 136, 136, 152, 104, 5, 9, 9, 6, 0, 255, 16, 32, 0, 136,
136, 136, 248, 8, 112, 4, 7, 7, 6, 1, 255, 192, 64, 96, 80, 96,
64, 224, 5, 8, 8, 6, 0, 255, 80, 0, 136, 136, 136, 120, 8, 112
};
#endif

184
Marlin/dogm_font_data_ISO10646_1_PL.h Normal file
View file

@ -0,0 +1,184 @@
/*
Fontname: ISO10646-1-PL
Copyright: A.Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-2 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-2
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_1_PL_5x7[2732] U8G_FONT_SECTION(".progmem.ISO10646_1_PL_5x7") = {
0,6,9,0,254,7,1,146,3,33,32,255,255,8,254,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
6,0,2,104,144,0,0,0,6,0,0,5,9,9,6,0,
254,112,136,136,248,136,136,136,16,32,5,7,7,6,0,254,
112,8,120,136,120,16,32,5,8,8,6,0,0,16,32,112,
136,128,128,136,112,5,7,7,6,0,0,16,32,112,128,128,
136,112,5,9,9,6,0,254,248,128,128,240,128,128,248,8,
16,5,7,7,6,0,254,112,136,248,128,112,16,32,5,7,
7,6,0,0,128,144,160,192,128,128,248,5,7,7,6,0,
0,96,40,48,96,160,32,112,5,8,8,6,0,0,16,168,
136,200,168,152,136,136,5,8,8,6,0,0,8,16,0,176,
200,136,136,136,5,8,8,6,0,0,16,32,112,136,136,136,
136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,112,
5,8,8,6,0,0,16,120,128,128,112,8,8,240,5,8,
8,6,0,0,16,32,0,112,128,112,8,240,5,8,8,6,
0,0,32,248,8,16,32,64,128,248,5,8,8,6,0,0,
16,32,0,248,16,32,64,248,5,7,7,6,0,0,248,8,
16,248,64,128,248,5,8,8,6,0,0,48,48,0,248,16,
32,64,248,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,1,7,7,
6,2,0,128,0,128,128,128,128,128,5,7,7,6,0,0,
32,112,168,160,168,112,32,5,7,7,6,0,0,48,64,64,
224,64,80,168,5,5,5,6,0,0,136,112,80,112,136,5,
7,7,6,0,0,136,80,32,248,32,248,32,1,7,7,6,
2,0,128,128,128,0,128,128,128,5,8,8,6,0,0,48,
72,32,80,80,32,144,96,3,1,1,6,1,7,160,5,7,
7,6,0,0,248,136,184,184,184,136,248,5,7,7,6,0,
1,112,8,120,136,120,0,248,5,5,5,6,0,1,40,80,
160,80,40,5,3,3,6,0,1,248,8,8,2,2,2,6,
2,6,64,128,5,7,7,6,0,0,248,136,168,136,152,168,
248,5,1,1,6,0,6,248,4,4,4,6,0,3,96,144,
144,96,5,7,7,6,0,0,32,32,248,32,32,0,248,4,
5,5,6,0,3,96,144,32,64,240,3,5,5,6,0,3,
224,32,224,32,224,2,2,2,6,2,6,64,128,5,8,8,
6,0,255,136,136,136,136,152,232,128,128,5,7,7,6,0,
0,120,152,152,120,24,24,24,2,2,2,6,2,2,192,192,
2,2,2,6,2,255,64,128,3,5,5,6,0,3,64,192,
64,64,224,5,7,7,6,0,1,112,136,136,136,112,0,248,
5,5,5,6,0,1,160,80,40,80,160,5,7,7,6,0,
0,136,144,168,88,184,8,8,5,7,7,6,0,0,136,144,
184,72,152,32,56,5,8,8,6,0,0,192,64,192,72,216,
56,8,8,5,7,7,6,0,0,32,0,32,64,128,136,112,
5,8,8,6,0,0,64,32,0,112,136,248,136,136,5,8,
8,6,0,0,16,32,0,112,136,248,136,136,5,8,8,6,
0,0,32,80,0,112,136,248,136,136,5,8,8,6,0,0,
104,144,0,112,136,248,136,136,5,8,8,6,0,0,80,0,
112,136,136,248,136,136,5,8,8,6,0,0,32,80,32,112,
136,248,136,136,5,7,7,6,0,0,56,96,160,184,224,160,
184,5,8,8,6,0,255,112,136,128,128,136,112,32,96,5,
8,8,6,0,0,64,32,0,248,128,240,128,248,5,8,8,
6,0,0,8,16,0,248,128,240,128,248,5,8,8,6,0,
0,32,80,0,248,128,240,128,248,5,7,7,6,0,0,80,
0,248,128,240,128,248,3,8,8,6,1,0,128,64,0,224,
64,64,64,224,3,8,8,6,1,0,32,64,0,224,64,64,
64,224,3,8,8,6,1,0,64,160,0,224,64,64,64,224,
3,7,7,6,1,0,160,0,224,64,64,64,224,5,7,7,
6,0,0,112,72,72,232,72,72,112,5,8,8,6,0,0,
104,144,0,136,200,168,152,136,5,8,8,6,0,0,64,32,
112,136,136,136,136,112,5,8,8,6,0,0,16,32,112,136,
136,136,136,112,5,8,8,6,0,0,32,80,0,112,136,136,
136,112,5,8,8,6,0,0,104,144,0,112,136,136,136,112,
5,8,8,6,0,0,80,0,112,136,136,136,136,112,5,5,
5,6,0,1,136,80,32,80,136,5,8,8,6,0,255,16,
112,168,168,168,168,112,64,5,8,8,6,0,0,64,32,136,
136,136,136,136,112,5,8,8,6,0,0,16,32,136,136,136,
136,136,112,5,8,8,6,0,0,32,80,0,136,136,136,136,
112,5,8,8,6,0,0,80,0,136,136,136,136,136,112,5,
8,8,6,0,0,16,32,136,80,32,32,32,32,5,9,9,
6,0,255,192,64,112,72,72,112,64,64,224,4,8,8,6,
1,255,96,144,144,160,144,144,224,128,5,8,8,6,0,0,
64,32,0,112,8,120,136,120,5,8,8,6,0,0,16,32,
0,112,8,120,136,120,5,8,8,6,0,0,32,80,0,112,
8,120,136,120,5,8,8,6,0,0,104,144,0,112,8,120,
136,120,5,7,7,6,0,0,80,0,112,8,120,136,120,5,
8,8,6,0,0,32,80,32,112,8,120,136,120,5,6,6,
6,0,0,208,40,120,160,168,80,5,6,6,6,0,255,112,
128,136,112,32,96,5,8,8,6,0,0,64,32,0,112,136,
248,128,112,5,8,8,6,0,0,16,32,0,112,136,248,128,
112,5,8,8,6,0,0,32,80,0,112,136,248,128,112,5,
7,7,6,0,0,80,0,112,136,248,128,112,3,8,8,6,
1,0,128,64,0,64,192,64,64,224,3,8,8,6,1,0,
32,64,0,64,192,64,64,224,3,8,8,6,1,0,64,160,
0,64,192,64,64,224,3,7,7,6,1,0,160,0,64,192,
64,64,224,5,7,7,6,0,0,160,64,160,16,120,136,112,
5,8,8,6,0,0,104,144,0,176,200,136,136,136,5,8,
8,6,0,0,64,32,0,112,136,136,136,112,5,8,8,6,
0,0,16,32,0,112,136,136,136,112,5,8,8,6,0,0,
32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144,
0,112,136,136,136,112,5,7,7,6,0,0,80,0,112,136,
136,136,112,5,5,5,6,0,1,32,0,248,0,32,5,7,
7,6,0,255,16,112,168,168,168,112,64,5,8,8,6,0,
0,64,32,0,136,136,136,152,104,5,8,8,6,0,0,16,
32,0,136,136,136,152,104,5,8,8,6,0,0,32,80,0,
136,136,136,152,104,5,7,7,6,0,0,80,0,136,136,136,
152,104,5,9,9,6,0,255,16,32,0,136,136,136,248,8,
112,4,7,7,6,1,255,192,64,96,80,96,64,224,5,8,
8,6,0,255,80,0,136,136,136,120,8,112};

197
Marlin/dogm_font_data_ISO10646_1_tr.h Normal file
View file

@ -0,0 +1,197 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/*
Fontname: ISO10646-1-tr
Copyright: public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = {
0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
6,0,2,104,144,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,7,
7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,0,
0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,112,
80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,32,
1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,8,
6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,1,
7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,5,
7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,6,
0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,8,
2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,136,
168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,6,
0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,32,
32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,5,
5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,64,
128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,5,
7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,6,
2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,6,
0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,136,
136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,5,
7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,6,
0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,192,
64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,32,
64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,248,
136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,136,
5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,8,
8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,6,
0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,0,
32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,96,
160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,136,
112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,128,
248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,5,
8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,7,
6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,0,
128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,64,
0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,224,
64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,64,
224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,112,
5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,8,
8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,6,
0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,0,
32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144,
0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,136,
136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,5,
8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,8,
6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,0,
0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,32,
80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,136,
136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,128,
128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,32,
96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,5,
8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,8,
6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,0,
0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,104,
144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,112,
8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,120,
136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,7,
7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,0,
0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,16,
32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,0,
112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,248,
128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,224,
3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,8,
8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,6,
1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,80,
32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,0,
176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,136,
136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,
112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,5,
8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,7,
6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,1,
32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,168,
112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,104,
5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,8,
8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,6,
0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,128,
128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,32,
96,5,8,8,6,0,255,80,0,136,136,136,120,8,112};

196
Marlin/dogm_font_data_ISO10646_5_Cyrillic.h Normal file
View file

@ -0,0 +1,196 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: ISO10646_5_Cyrillic
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_5_Cyrillic_5x7[2560] U8G_SECTION(".progmem.ISO10646_5_Cyrillic_5x7") = {
0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7,
255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1,
0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80,
136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64,
5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0,
0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128,
128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120,
5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0,
0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136,
136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136,
136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8,
8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6,
0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192,
64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168,
168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6,
0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136,
240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5,
5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0,
112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64,
72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5,
6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136,
168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6,
6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0,
248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64,
64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3,
7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6,
0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 8, 8, 6, 0, 0,
64, 248, 128, 128, 240, 128, 128, 248, 5, 8, 8, 6, 0, 0, 80, 248,
128, 128, 240, 128, 128, 248, 5, 7, 7, 6, 0, 0, 224, 64, 64, 112,
72, 72, 112, 5, 8, 8, 6, 0, 0, 16, 32, 248, 136, 128, 128, 128,
128, 5, 7, 7, 6, 0, 0, 48, 72, 128, 224, 128, 72, 48, 5, 7,
7, 6, 0, 0, 112, 136, 128, 112, 8, 136, 112, 3, 7, 7, 6, 1,
0, 224, 64, 64, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 160, 0,
224, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
16, 144, 96, 5, 7, 7, 6, 0, 0, 160, 160, 160, 184, 168, 168, 184,
5, 7, 7, 6, 0, 0, 160, 160, 160, 248, 168, 168, 184, 4, 7, 7,
6, 0, 0, 224, 64, 112, 80, 80, 80, 80, 5, 8, 8, 6, 0, 0,
16, 32, 136, 144, 160, 224, 144, 136, 5, 8, 8, 6, 0, 0, 64, 32,
136, 152, 168, 200, 136, 136, 5, 9, 9, 6, 0, 255, 80, 32, 136, 136,
136, 80, 32, 32, 32, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136,
136, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136,
5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 136, 136, 240, 5, 7, 7,
6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0,
248, 136, 128, 128, 128, 128, 128, 5, 8, 8, 6, 0, 255, 120, 40, 40,
40, 72, 136, 248, 136, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5,
7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6,
0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80,
32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0, 0, 136, 144, 160,
192, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168,
72, 5, 7, 7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7,
7, 6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6, 0,
0, 112, 136, 136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 136,
136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 128, 128, 128, 136, 112, 5,
7, 7, 6, 0, 0, 248, 32, 32, 32, 32, 32, 32, 5, 7, 7, 6,
0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 7, 7, 6, 0, 0, 32,
112, 168, 168, 168, 112, 32, 5, 7, 7, 6, 0, 0, 136, 136, 80, 32,
80, 136, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136, 136, 248,
8, 5, 7, 7, 6, 0, 0, 136, 136, 136, 152, 104, 8, 8, 5, 7,
7, 6, 0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 8, 8, 6, 0,
255, 168, 168, 168, 168, 168, 168, 248, 8, 5, 7, 7, 6, 0, 0, 192,
64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200,
168, 168, 200, 5, 7, 7, 6, 0, 0, 128, 128, 128, 240, 136, 136, 240,
5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112, 5, 7, 7,
6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6, 0, 0,
120, 136, 136, 120, 40, 72, 136, 5, 5, 5, 6, 0, 0, 112, 8, 120,
136, 120, 5, 7, 7, 6, 0, 0, 24, 96, 128, 240, 136, 136, 112, 4,
5, 5, 6, 0, 0, 224, 144, 224, 144, 224, 5, 5, 5, 6, 0, 0,
248, 136, 128, 128, 128, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248,
136, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6,
0, 0, 168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48,
8, 240, 5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7,
6, 0, 0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0,
144, 160, 192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72,
5, 5, 5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0,
0, 136, 136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 112, 136, 136, 136,
112, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5, 6, 6, 6,
0, 255, 240, 136, 136, 240, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128,
128, 136, 112, 5, 5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 6,
6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0,
32, 112, 168, 168, 112, 32, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80,
136, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 8, 5, 5, 5,
6, 0, 0, 136, 136, 248, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168,
168, 168, 248, 5, 6, 6, 6, 0, 255, 168, 168, 168, 168, 248, 8, 5,
5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0, 0,
136, 136, 200, 168, 200, 3, 5, 5, 6, 1, 0, 128, 128, 192, 160, 192,
5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6, 0,
0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120, 40,
72, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128, 112, 5,
7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 9, 9, 6,
0, 255, 64, 224, 64, 64, 120, 72, 72, 72, 16, 5, 8, 8, 6, 0,
0, 16, 32, 0, 248, 136, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112,
136, 96, 136, 112, 5, 5, 5, 6, 0, 0, 112, 128, 112, 8, 240, 1,
7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 7, 7, 6,
1, 0, 160, 0, 64, 64, 64, 64, 64, 3, 8, 8, 6, 1, 255, 32,
0, 32, 32, 32, 32, 160, 64, 5, 5, 5, 6, 0, 0, 160, 160, 184,
168, 184, 5, 5, 5, 6, 0, 0, 160, 160, 248, 168, 184, 5, 6, 6,
6, 0, 0, 64, 224, 64, 120, 72, 72, 4, 8, 8, 6, 0, 0, 16,
32, 0, 144, 160, 192, 160, 144, 5, 8, 8, 6, 0, 0, 64, 32, 0,
136, 152, 168, 200, 136, 5, 9, 9, 6, 0, 255, 80, 32, 0, 136, 136,
136, 120, 8, 112, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 32
};

293
Marlin/dogm_font_data_ISO10646_CN.h Normal file
View file

@ -0,0 +1,293 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: ISO10646_CN
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w=11 h=11 x= 2 y=10 dx=12 dy= 0 ascent=10 len=22
Font Bounding box w=12 h=11 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent =10 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_CN[4105] U8G_SECTION(".progmem.ISO10646_CN") = {
0, 12, 11, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 10, 255, 7,
255, 0, 0, 0, 6, 0, 10, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5,
5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 0,
0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168,
168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5,
7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6,
0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240,
136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128,
5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7,
6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0,
128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16,
16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144,
136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7,
7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0,
0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136,
136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5,
7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6,
0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248,
32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136,
136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32,
5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7,
6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0,
136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 64, 128, 248, 3, 7, 7, 6, 0, 0, 224, 128, 128, 128, 128, 128,
224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6,
0, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32,
80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128,
64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6,
0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112,
128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136,
120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6,
0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112,
136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136,
136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3,
8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7,
6, 1, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0,
192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168,
168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5,
6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136,
136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8,
5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0,
0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64,
64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5,
5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136,
136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5,
6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0,
0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128,
64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128,
3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2,
6, 0, 3, 104, 144, 0, 0, 0, 6, 0, 10, 0, 0, 0, 12, 0,
10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
12, 0, 10, 0, 0, 0, 12, 0, 10, 11, 11, 22, 12, 0, 255, 255,
224, 2, 0, 2, 0, 4, 0, 13, 0, 20, 128, 36, 64, 196, 32, 4,
0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 249, 0, 138, 0, 171,
224, 172, 64, 170, 64, 170, 64, 170, 64, 170, 128, 33, 0, 82, 128, 140,
96, 11, 11, 22, 12, 0, 255, 36, 0, 36, 0, 63, 128, 68, 0, 132,
0, 4, 0, 255, 224, 10, 0, 17, 0, 32, 128, 192, 96, 11, 11, 22,
12, 0, 255, 36, 0, 36, 0, 63, 192, 68, 0, 4, 0, 255, 224, 9,
0, 9, 0, 17, 32, 33, 32, 64, 224, 11, 11, 22, 12, 0, 255, 32,
0, 61, 224, 81, 32, 145, 32, 17, 32, 255, 32, 17, 32, 41, 32, 37,
224, 69, 32, 128, 0, 11, 11, 22, 12, 0, 255, 32, 128, 127, 192, 8,
64, 255, 224, 17, 0, 32, 128, 95, 64, 128, 32, 63, 128, 0, 0, 127,
192, 11, 11, 22, 12, 0, 255, 34, 64, 71, 224, 148, 128, 228, 128, 47,
224, 68, 128, 244, 128, 7, 224, 52, 128, 196, 128, 7, 224, 11, 11, 22,
12, 0, 255, 4, 128, 143, 224, 73, 0, 25, 0, 47, 192, 9, 0, 9,
0, 47, 192, 73, 0, 137, 0, 15, 224, 11, 11, 22, 12, 0, 255, 16,
0, 63, 128, 81, 0, 14, 0, 49, 128, 192, 96, 63, 128, 36, 128, 63,
128, 36, 128, 63, 128, 11, 11, 22, 12, 0, 255, 34, 128, 250, 64, 7,
224, 250, 128, 138, 128, 138, 128, 250, 128, 34, 128, 178, 128, 170, 160, 100,
224, 11, 11, 22, 12, 0, 255, 34, 32, 71, 64, 146, 128, 239, 224, 34,
0, 71, 192, 236, 64, 7, 192, 52, 64, 199, 192, 4, 64, 11, 11, 22,
12, 0, 255, 8, 0, 15, 192, 8, 0, 8, 0, 255, 224, 8, 0, 14,
0, 9, 128, 8, 64, 8, 0, 8, 0, 10, 11, 22, 12, 0, 255, 255,
128, 0, 128, 0, 128, 128, 128, 128, 128, 255, 128, 128, 0, 128, 0, 128,
64, 128, 64, 127, 192, 11, 11, 22, 12, 0, 255, 71, 192, 65, 0, 239,
224, 65, 0, 69, 0, 105, 96, 201, 32, 77, 96, 73, 32, 79, 224, 200,
32, 11, 11, 22, 12, 0, 255, 8, 0, 4, 0, 4, 0, 10, 0, 10,
0, 10, 0, 17, 0, 17, 0, 32, 128, 64, 64, 128, 32, 11, 11, 22,
12, 0, 255, 34, 64, 34, 0, 247, 224, 34, 0, 35, 224, 53, 32, 229,
32, 37, 64, 40, 128, 41, 64, 114, 32, 11, 10, 20, 12, 0, 0, 68,
64, 68, 64, 68, 64, 127, 192, 4, 0, 4, 0, 132, 32, 132, 32, 132,
32, 255, 224, 11, 11, 22, 12, 0, 255, 4, 0, 0, 0, 127, 192, 4,
0, 4, 0, 4, 0, 127, 192, 4, 0, 4, 0, 4, 0, 255, 224, 11,
11, 22, 12, 0, 255, 255, 224, 17, 0, 1, 192, 254, 0, 72, 128, 37,
0, 4, 0, 255, 224, 21, 0, 36, 128, 196, 96, 11, 11, 22, 12, 0,
255, 17, 0, 127, 192, 68, 64, 127, 192, 68, 64, 127, 192, 4, 0, 255,
224, 4, 0, 4, 0, 4, 0, 9, 11, 22, 12, 0, 255, 16, 0, 255,
128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128,
128, 255, 128, 11, 11, 22, 12, 0, 255, 113, 0, 1, 0, 3, 224, 249,
32, 33, 32, 65, 32, 81, 32, 137, 32, 250, 32, 2, 32, 4, 192, 11,
11, 22, 12, 0, 255, 127, 192, 17, 0, 17, 0, 17, 0, 17, 0, 255,
224, 17, 0, 17, 0, 33, 0, 33, 0, 65, 0, 11, 11, 22, 12, 0,
255, 33, 0, 34, 0, 244, 64, 87, 224, 80, 32, 87, 192, 148, 64, 84,
64, 36, 64, 87, 192, 148, 64, 11, 11, 22, 12, 0, 255, 17, 0, 10,
0, 127, 192, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 17, 0, 32,
128, 192, 96, 10, 11, 22, 12, 0, 255, 95, 192, 0, 64, 132, 64, 132,
64, 191, 64, 132, 64, 140, 64, 148, 64, 164, 64, 140, 64, 129, 192, 11,
11, 22, 12, 0, 255, 36, 0, 39, 192, 36, 0, 36, 0, 255, 224, 0,
0, 20, 64, 36, 128, 71, 0, 12, 0, 112, 0, 11, 11, 22, 12, 0,
255, 36, 128, 4, 128, 15, 192, 228, 128, 36, 128, 63, 224, 36, 128, 36,
128, 40, 128, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 8, 0, 8,
0, 255, 128, 136, 128, 136, 128, 255, 128, 136, 128, 136, 128, 255, 160, 136,
32, 7, 224, 11, 11, 22, 12, 0, 255, 39, 128, 36, 128, 244, 128, 36,
128, 116, 128, 108, 128, 164, 128, 36, 128, 36, 160, 40, 160, 48, 96, 10,
11, 22, 12, 0, 255, 255, 192, 128, 64, 128, 64, 158, 64, 146, 64, 146,
64, 158, 64, 128, 64, 128, 64, 255, 192, 128, 64, 11, 11, 22, 12, 0,
255, 127, 192, 68, 0, 95, 192, 80, 64, 95, 192, 80, 64, 95, 192, 66,
0, 74, 128, 82, 64, 166, 32, 11, 11, 22, 12, 0, 255, 4, 0, 7,
224, 4, 0, 127, 192, 64, 64, 64, 64, 64, 64, 127, 192, 0, 0, 82,
64, 137, 32, 11, 11, 22, 12, 0, 255, 71, 128, 36, 128, 4, 128, 4,
128, 232, 96, 32, 0, 47, 192, 36, 64, 34, 128, 49, 0, 38, 192, 11,
11, 22, 12, 0, 255, 127, 192, 74, 64, 127, 192, 4, 0, 255, 224, 4,
0, 63, 128, 32, 128, 36, 128, 36, 128, 255, 224, 11, 11, 22, 12, 0,
255, 34, 0, 79, 224, 72, 32, 79, 224, 200, 0, 79, 224, 74, 160, 90,
160, 111, 224, 74, 160, 72, 96, 11, 11, 22, 12, 0, 255, 243, 192, 36,
64, 42, 128, 241, 0, 34, 128, 101, 224, 114, 32, 165, 64, 32, 128, 35,
0, 44, 0, 11, 11, 22, 12, 0, 255, 4, 0, 255, 224, 128, 32, 0,
0, 255, 224, 4, 0, 36, 0, 39, 192, 36, 0, 84, 0, 143, 224, 11,
11, 22, 12, 0, 255, 115, 224, 16, 128, 81, 0, 35, 224, 250, 32, 42,
160, 34, 160, 34, 160, 32, 128, 33, 64, 98, 32, 11, 11, 22, 12, 0,
255, 34, 0, 247, 128, 34, 128, 54, 128, 226, 160, 37, 160, 36, 96, 104,
32, 0, 0, 82, 64, 137, 32, 11, 11, 22, 12, 0, 255, 115, 192, 66,
0, 66, 0, 123, 224, 74, 64, 74, 64, 122, 64, 74, 64, 66, 64, 68,
64, 136, 64, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 8, 0, 31,
192, 48, 64, 95, 192, 144, 64, 31, 192, 16, 64, 16, 64, 16, 192, 11,
11, 22, 12, 0, 255, 2, 0, 127, 224, 66, 0, 66, 0, 95, 192, 66,
0, 71, 0, 74, 128, 82, 64, 98, 32, 130, 0, 11, 11, 22, 12, 0,
255, 243, 192, 150, 64, 145, 128, 166, 96, 161, 0, 151, 192, 145, 0, 149,
0, 231, 224, 129, 0, 129, 0, 11, 11, 22, 12, 0, 255, 15, 128, 136,
128, 79, 128, 8, 128, 143, 128, 64, 0, 31, 192, 53, 64, 85, 64, 149,
64, 63, 224, 11, 11, 22, 12, 0, 255, 39, 224, 32, 128, 248, 128, 32,
128, 32, 128, 56, 128, 224, 128, 32, 128, 32, 128, 32, 128, 97, 128, 11,
11, 22, 12, 0, 255, 31, 224, 145, 0, 87, 192, 20, 64, 23, 192, 148,
64, 87, 192, 17, 0, 85, 64, 153, 32, 35, 0, 11, 11, 22, 12, 0,
255, 32, 128, 39, 224, 242, 64, 33, 128, 34, 64, 52, 32, 226, 64, 34,
64, 34, 64, 34, 64, 100, 64, 11, 11, 22, 12, 0, 255, 65, 0, 65,
0, 79, 224, 233, 32, 73, 32, 73, 32, 111, 224, 201, 32, 73, 32, 73,
32, 207, 224, 11, 11, 22, 12, 0, 255, 33, 0, 241, 0, 79, 224, 169,
32, 249, 32, 47, 224, 57, 32, 233, 32, 41, 32, 47, 224, 40, 32, 11,
11, 22, 12, 0, 255, 143, 224, 73, 32, 9, 32, 203, 160, 73, 32, 79,
224, 72, 32, 75, 160, 74, 160, 107, 160, 80, 224, 11, 11, 22, 12, 0,
255, 127, 192, 4, 0, 68, 64, 36, 64, 36, 128, 4, 0, 255, 224, 4,
0, 4, 0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 130, 0, 66,
0, 31, 224, 194, 0, 95, 192, 82, 64, 95, 192, 71, 0, 74, 128, 82,
64, 191, 224, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 72, 128, 127,
224, 72, 128, 79, 128, 64, 0, 95, 192, 72, 64, 71, 128, 152, 96, 11,
11, 22, 12, 0, 255, 1, 0, 239, 224, 161, 0, 164, 64, 175, 224, 164,
64, 175, 224, 169, 32, 233, 32, 2, 128, 12, 96, 11, 11, 22, 12, 0,
255, 20, 192, 246, 160, 188, 96, 167, 128, 168, 128, 191, 224, 169, 32, 239,
224, 9, 32, 15, 224, 9, 32, 11, 11, 22, 12, 0, 255, 127, 128, 64,
128, 66, 128, 98, 128, 84, 128, 72, 128, 72, 128, 84, 160, 98, 160, 64,
96, 128, 32, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 64, 32, 127,
224, 64, 0, 125, 224, 84, 32, 76, 160, 84, 96, 100, 160, 141, 96, 11,
11, 22, 12, 0, 255, 130, 0, 95, 224, 4, 0, 8, 64, 159, 224, 64,
32, 10, 128, 10, 128, 74, 160, 146, 160, 34, 96, 11, 11, 22, 12, 0,
255, 65, 0, 79, 224, 232, 32, 66, 128, 68, 64, 104, 32, 199, 192, 65,
0, 65, 0, 65, 0, 207, 224, 11, 11, 22, 12, 0, 255, 80, 32, 125,
32, 145, 32, 255, 32, 17, 32, 125, 32, 85, 32, 85, 32, 84, 32, 92,
32, 16, 224, 11, 11, 22, 12, 0, 255, 63, 128, 32, 128, 63, 128, 32,
128, 255, 224, 72, 0, 123, 192, 73, 64, 121, 64, 72, 128, 251, 96, 11,
11, 22, 12, 0, 255, 4, 0, 4, 0, 4, 0, 36, 128, 36, 64, 68,
64, 68, 32, 132, 32, 4, 0, 4, 0, 28, 0, 11, 11, 22, 12, 0,
255, 4, 0, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 10, 0, 17,
0, 17, 0, 32, 128, 192, 96, 9, 10, 20, 10, 0, 0, 136, 128, 73,
0, 8, 0, 255, 128, 0, 128, 0, 128, 127, 128, 0, 128, 0, 128, 255,
128, 11, 11, 22, 12, 0, 255, 33, 0, 18, 0, 255, 224, 0, 0, 120,
128, 74, 128, 122, 128, 74, 128, 122, 128, 72, 128, 89, 128, 11, 11, 22,
12, 0, 255, 39, 192, 0, 0, 0, 0, 239, 224, 33, 0, 34, 0, 36,
64, 47, 224, 32, 32, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 32,
128, 39, 0, 249, 0, 33, 192, 119, 0, 33, 0, 249, 224, 39, 0, 113,
32, 169, 32, 32, 224, 11, 11, 22, 12, 0, 255, 16, 64, 16, 64, 253,
224, 16, 64, 56, 192, 53, 64, 82, 64, 148, 64, 16, 64, 16, 64, 16,
192, 11, 11, 22, 12, 0, 255, 0, 64, 248, 64, 11, 224, 8, 64, 136,
64, 82, 64, 81, 64, 33, 64, 80, 64, 72, 64, 137, 192, 10, 11, 22,
12, 0, 255, 132, 0, 132, 64, 132, 128, 245, 0, 134, 0, 132, 0, 132,
0, 148, 0, 164, 64, 196, 64, 131, 192, 11, 11, 22, 12, 0, 255, 17,
32, 125, 0, 17, 0, 255, 224, 41, 0, 253, 64, 73, 64, 124, 128, 8,
160, 253, 96, 10, 32, 11, 11, 22, 12, 0, 255, 23, 192, 36, 64, 36,
64, 103, 192, 161, 0, 47, 224, 33, 0, 35, 128, 37, 64, 41, 32, 33,
0, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 16, 0, 39, 192, 32,
128, 97, 0, 175, 224, 33, 0, 33, 0, 33, 0, 35, 0, 11, 11, 22,
12, 0, 255, 36, 0, 47, 224, 180, 0, 164, 128, 164, 160, 170, 192, 42,
128, 40, 128, 41, 64, 50, 64, 36, 32, 11, 11, 22, 12, 0, 255, 127,
224, 128, 0, 63, 192, 32, 64, 63, 192, 16, 0, 31, 192, 16, 64, 40,
128, 71, 0, 56, 224, 11, 11, 22, 12, 0, 255, 127, 224, 64, 0, 64,
0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 128,
0, 11, 11, 22, 12, 0, 255, 255, 224, 4, 0, 127, 192, 68, 64, 127,
192, 68, 64, 127, 192, 68, 0, 36, 0, 24, 0, 231, 224, 11, 11, 22,
12, 0, 255, 17, 224, 253, 0, 69, 0, 41, 224, 253, 64, 17, 64, 125,
64, 17, 64, 85, 64, 146, 64, 52, 64, 11, 11, 22, 12, 0, 255, 33,
0, 95, 224, 64, 0, 207, 192, 64, 0, 79, 192, 64, 0, 79, 192, 72,
64, 79, 192, 72, 64, 11, 11, 22, 12, 0, 255, 4, 0, 127, 192, 64,
64, 127, 192, 64, 64, 127, 192, 64, 64, 127, 192, 4, 64, 82, 32, 191,
160, 11, 11, 22, 12, 0, 255, 127, 192, 68, 64, 127, 192, 68, 64, 127,
192, 4, 0, 27, 0, 224, 224, 17, 0, 17, 0, 97, 0, 11, 11, 22,
12, 0, 255, 255, 224, 4, 0, 8, 0, 127, 224, 73, 32, 79, 32, 73,
32, 79, 32, 73, 32, 73, 32, 127, 224, 11, 11, 22, 12, 0, 255, 253,
224, 86, 64, 121, 64, 56, 128, 85, 64, 146, 32, 255, 224, 4, 0, 39,
192, 36, 0, 255, 224, 11, 11, 22, 12, 0, 255, 251, 128, 82, 0, 123,
224, 18, 64, 250, 64, 20, 64, 63, 128, 32, 128, 63, 128, 32, 128, 63,
128, 11, 11, 22, 12, 0, 255, 31, 224, 32, 0, 39, 192, 100, 64, 167,
192, 32, 0, 47, 224, 40, 32, 39, 192, 33, 0, 35, 0, 11, 11, 22,
12, 0, 255, 243, 224, 130, 32, 130, 32, 250, 32, 130, 32, 130, 32, 138,
32, 178, 32, 194, 224, 2, 0, 2, 0, 11, 11, 22, 12, 0, 255, 36,
128, 70, 160, 149, 192, 228, 128, 39, 224, 68, 128, 245, 192, 6, 160, 52,
128, 196, 128, 7, 224, 11, 11, 22, 12, 0, 255, 39, 192, 65, 0, 135,
224, 224, 32, 34, 128, 69, 128, 242, 128, 15, 224, 48, 128, 193, 64, 2,
32, 11, 11, 22, 12, 0, 255, 2, 0, 2, 0, 34, 0, 35, 192, 34,
0, 34, 0, 34, 0, 34, 0, 34, 0, 34, 0, 255, 224, 9, 11, 22,
12, 0, 255, 8, 0, 8, 0, 255, 128, 136, 128, 136, 128, 136, 128, 255,
128, 136, 128, 136, 128, 136, 128, 255, 128, 11, 11, 22, 12, 0, 255, 33,
0, 83, 160, 65, 0, 247, 224, 81, 0, 83, 192, 86, 64, 83, 192, 90,
64, 83, 192, 66, 64, 11, 11, 22, 12, 0, 255, 127, 192, 4, 0, 4,
0, 4, 0, 255, 224, 10, 0, 10, 0, 18, 0, 34, 32, 66, 32, 129,
224, 11, 11, 22, 12, 0, 255, 17, 0, 33, 0, 47, 224, 97, 0, 163,
128, 35, 128, 37, 64, 37, 64, 41, 32, 33, 0, 33, 0, 11, 11, 22,
12, 0, 255, 247, 224, 148, 32, 244, 32, 151, 224, 148, 128, 244, 128, 151,
224, 148, 128, 244, 160, 150, 96, 4, 32, 11, 11, 22, 12, 0, 255, 123,
224, 148, 128, 4, 0, 127, 192, 4, 0, 255, 224, 1, 0, 255, 224, 33,
0, 17, 0, 7, 0, 11, 11, 22, 12, 0, 255, 33, 0, 71, 192, 145,
0, 47, 224, 96, 128, 175, 224, 32, 128, 36, 128, 34, 128, 32, 128, 35,
128, 11, 11, 22, 12, 0, 255, 39, 192, 36, 64, 247, 192, 46, 224, 42,
160, 62, 224, 225, 0, 47, 224, 35, 128, 37, 64, 105, 32, 11, 11, 22,
12, 0, 255, 20, 0, 39, 224, 42, 0, 98, 0, 163, 192, 34, 0, 34,
0, 35, 224, 34, 0, 34, 0, 34, 0
};

192
Marlin/dogm_font_data_ISO10646_CZ.h Normal file
View file

@ -0,0 +1,192 @@
/*
Fontname: ISO10646_CZ
Copyright: A. Hardtung, public domain
Modified for Czech accents by Petr Zahradnik, http://www.zahradniksebavi.cz
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_CZ[2832] U8G_SECTION(".progmem.ISO10646_CZ") = {
0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0,
0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,8,
16,248,128,128,240,128,248,3,8,8,6,1,0,32,64,224,
64,64,64,64,224,5,8,8,6,0,0,16,32,112,136,136,
136,136,112,5,8,8,6,0,0,16,32,136,136,136,136,136,
112,5,8,8,6,0,0,16,32,136,136,80,32,32,32,5,
8,8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,
6,0,0,16,32,0,112,136,248,128,112,2,8,8,6,2,
0,64,128,0,128,128,128,128,128,5,8,8,6,0,0,16,
32,0,112,136,136,136,112,5,8,8,6,0,0,16,32,0,
136,136,136,152,104,5,9,9,6,0,255,16,32,0,136,136,
136,120,8,112,5,8,8,6,0,0,80,32,112,136,128,128,
136,112,5,8,8,6,0,0,80,32,0,112,128,128,136,112,
5,8,8,6,0,0,80,32,240,136,136,136,136,240,6,8,
8,6,0,0,4,20,24,112,144,144,144,112,5,8,8,6,
0,0,80,32,248,128,128,240,128,248,5,8,8,6,0,0,
80,32,0,112,136,248,128,112,5,8,8,6,0,0,80,32,
136,200,168,152,136,136,5,8,8,6,0,0,80,32,0,176,
200,136,136,136,5,8,8,6,0,0,80,32,240,136,240,160,
144,136,5,8,8,6,0,0,80,32,0,176,200,128,128,128,
5,8,8,6,0,0,80,32,120,128,128,112,8,240,5,8,
8,6,0,0,80,32,0,112,128,112,8,240,5,8,8,6,
0,0,80,32,248,32,32,32,32,32,6,8,8,6,0,0,
4,68,72,224,64,64,64,48,5,8,8,6,0,0,32,80,
168,136,136,136,136,112,5,8,8,6,0,0,32,80,32,136,
136,136,152,104,5,8,8,6,0,0,80,32,248,8,48,64,
128,248,5,8,8,6,0,0,80,32,0,248,16,32,64,248,
0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,
0,0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,
7,7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,
0,0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,
112,80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,
32,1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,
8,6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,
1,7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,
5,7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,
6,0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,
8,2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,
136,168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,
6,0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,
32,32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,
5,5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,
64,128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,
5,7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,
6,2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,
6,0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,
136,136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,
5,7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,
6,0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,
192,64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,
32,64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,
248,136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,
136,5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,
8,8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,
6,0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,
0,32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,
96,160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,
136,112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,
128,248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,
5,8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,
7,6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,
0,128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,
64,0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,
224,64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,
64,224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,
112,5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,
8,8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,
6,0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,
0,32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,
144,0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,
136,136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,
5,8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,
8,6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,
0,0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,
32,80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,
136,136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,
128,128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,
32,96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,
5,8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,
8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,
0,0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,
104,144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,
112,8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,
120,136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,
7,7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,
0,0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,
16,32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,
0,112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,
248,128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,
224,3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,
8,8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,
6,1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,
80,32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,
0,176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,
136,136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,
136,112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,
5,8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,
7,6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,
1,32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,
168,112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,
104,5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,
8,8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,
6,0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,
128,128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,
32,96,5,8,8,6,0,255,80,0,136,136,136,120,8,112
};

205
Marlin/dogm_font_data_ISO10646_Greek.h Normal file
View file

@ -0,0 +1,205 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/*
Fontname: ISO10646_4_Greek
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 9 x= 2 y= 6 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_Greek_5x7[2715] U8G_SECTION(".progmem.ISO10646_Greek_5x7") = {
0,6,9,0,254,7,1,145,3,32,32,255,255,8,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
0,0,112,136,152,168,200,136,112,3,7,7,6,1,0,64,
192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
48,64,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
112,5,7,7,6,0,0,112,136,136,120,8,16,96,2,5,
5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
8,16,32,0,32,5,6,6,6,0,0,112,136,8,104,168,
112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,7,
7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,0,
0,112,136,128,128,128,136,112,5,7,7,6,0,0,224,144,
136,136,136,144,224,5,7,7,6,0,0,248,128,128,240,128,
128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,5,
7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,6,
0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,128,
128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,16,
16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,136,
5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,7,
6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,0,
136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,136,
136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,128,
128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,7,
7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,0,
0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,32,
32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,136,
136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,5,
7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,6,
0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,136,
136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,32,
64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,224,
5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,1,
0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,80,
136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,64,
5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,0,
0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,128,
128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,120,
5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,0,
0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,136,
136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,136,
136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,8,
8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,6,
0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,192,
64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,168,
168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,6,
0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,136,
240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,5,
5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,0,
112,128,112,8,240,5,7,7,6,0,0,64,64,224,64,64,
72,48,5,5,5,6,0,0,136,136,136,152,104,5,5,5,
6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,136,
168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,6,
6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,0,
248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,64,
64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,3,
7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,6,
0,3,104,144,0,0,0,6,0,0,0,0,0,6,0,0,
0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,
0,0,2,2,2,6,1,6,64,128,3,3,3,6,1,5,
32,64,160,5,8,8,6,0,0,64,160,80,80,136,248,136,
136,2,2,2,6,1,2,192,192,5,8,8,6,0,0,64,
128,248,128,240,128,128,248,5,8,8,6,0,0,64,128,136,
136,248,136,136,136,4,8,8,6,0,0,64,128,112,32,32,
32,32,112,0,0,0,6,0,0,5,8,8,6,0,0,64,
128,112,136,136,136,136,112,0,0,0,6,0,0,5,8,8,
6,0,0,64,128,8,136,112,32,32,32,5,8,8,6,0,
0,64,128,112,136,136,136,80,216,3,8,8,6,1,0,32,
64,160,0,64,64,64,32,5,7,7,6,0,0,32,80,136,
136,248,136,136,5,7,7,6,0,0,240,72,72,112,72,72,
240,5,7,7,6,0,0,248,128,128,128,128,128,128,5,6,
6,6,0,0,32,80,80,136,136,248,5,7,7,6,0,0,
248,128,128,240,128,128,248,5,7,7,6,0,0,248,8,16,
32,64,128,248,5,7,7,6,0,0,136,136,136,248,136,136,
136,5,7,7,6,0,0,112,136,136,168,136,136,112,3,7,
7,6,1,0,224,64,64,64,64,64,224,5,7,7,6,0,
0,136,144,160,192,160,144,136,5,7,7,6,0,0,32,80,
136,136,136,136,136,5,7,7,6,0,0,136,216,168,168,136,
136,136,5,7,7,6,0,0,136,200,200,168,152,152,136,5,
7,7,6,0,0,248,0,0,112,0,0,248,5,7,7,6,
0,0,112,136,136,136,136,136,112,5,7,7,6,0,0,248,
80,80,80,80,80,80,5,7,7,6,0,0,240,136,136,240,
128,128,128,0,0,0,6,0,0,5,7,7,6,0,0,248,
128,64,32,64,128,248,5,7,7,6,0,0,248,32,32,32,
32,32,32,5,7,7,6,0,0,136,136,80,32,32,32,32,
5,7,7,6,0,0,112,32,112,168,112,32,112,5,7,7,
6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
168,168,168,168,112,32,32,5,6,6,6,0,0,112,136,136,
80,80,216,3,8,8,6,1,0,160,0,224,64,64,64,64,
224,5,8,8,6,0,0,80,0,136,136,136,80,32,32,5,
8,8,6,0,0,32,64,8,104,152,144,144,104,5,8,8,
6,0,0,32,64,0,112,136,224,136,112,5,9,9,6,0,
255,32,64,0,112,136,136,136,136,8,2,8,8,6,1,0,
64,128,0,128,128,128,128,64,5,8,8,6,0,0,16,32,
80,0,136,136,136,112,5,6,6,6,0,0,8,104,152,144,
144,104,4,6,6,6,0,255,96,144,240,144,224,128,5,6,
6,6,0,255,136,72,80,32,32,64,5,6,6,6,0,0,
48,64,112,136,136,112,5,5,5,6,0,0,112,136,224,136,
112,5,8,8,6,0,255,128,112,64,128,128,112,8,112,5,
6,6,6,0,255,184,200,136,136,136,8,5,5,5,6,0,
0,112,136,248,136,112,3,5,5,6,1,0,128,128,128,128,
96,4,5,5,6,0,0,144,160,192,160,144,5,6,6,6,
0,0,64,32,32,80,80,136,5,6,6,6,0,255,136,136,
136,216,168,128,5,5,5,6,0,0,136,136,80,96,32,5,
9,9,6,0,255,128,224,128,112,32,64,240,8,112,5,5,
5,6,0,0,112,136,136,136,112,5,5,5,6,0,0,248,
80,80,80,80,5,6,6,6,0,255,112,136,136,200,176,128,
5,7,7,6,0,255,48,64,128,64,48,8,112,5,5,5,
6,0,0,104,144,144,144,96,4,5,5,6,0,0,240,64,
64,64,48,5,5,5,6,0,0,136,136,144,144,224,5,7,
7,6,0,255,32,168,168,168,112,32,32,5,6,6,6,0,
255,136,80,32,32,80,136,5,6,6,6,0,255,168,168,168,
168,112,32,5,5,5,6,0,0,80,136,136,168,112,4,7,
7,6,0,0,160,0,64,64,64,64,48,5,7,7,6,0,
0,80,0,136,136,144,144,224,4,8,8,6,0,0,32,64,
0,96,144,144,144,96,5,8,8,6,0,0,32,64,0,136,
136,144,144,96,5,8,8,6,0,0,32,64,0,80,136,136,
168,112,5,7,7,6,0,255,144,160,192,160,144,136,16,5,
8,8,6,0,0,96,144,160,128,240,136,136,112,5,7,7,
6,0,0,112,80,56,144,144,144,96,5,6,6,6,0,0,
152,80,32,32,32,32,5,8,8,6,0,0,64,128,152,80,
32,32,32,32,5,8,8,6,0,0,80,0,152,80,32,32,
32,32,5,7,7,6,0,255,48,168,168,168,168,112,32,5,
5,5,6,0,0,248,80,80,80,88,5,6,6,6,0,255,
136,80,112,80,136,16,5,7,7,6,0,255,112,136,136,136,
112,32,112,5,6,6,6,0,255,112,136,136,112,32,112,5,
6,6,6,0,0,112,136,128,112,32,112,5,7,7,6,0,
255,8,8,112,128,112,16,96,5,6,6,6,0,0,248,128,
128,240,128,128,4,5,5,6,0,0,240,128,224,128,128,5,
6,6,6,0,0,248,0,0,112,0,248,4,5,5,6,0,
0,64,128,240,16,32,5,7,7,6,0,0,224,80,40,40,
8,8,16,5,7,7,6,0,0,192,32,80,40,8,8,8,
5,7,7,6,0,255,168,168,168,168,88,8,112,5,6,6,
6,0,255,168,168,168,88,8,112,5,6,6,6,0,0,104,
136,136,120,8,8,5,6,6,6,0,255,104,136,136,120,8,
8,4,8,8,6,0,255,128,224,144,144,144,144,32,192,5,
5,5,6,0,0,104,144,112,16,224,5,6,6,6,0,0,
96,144,16,96,136,112,4,6,6,6,0,0,96,144,16,96,
128,112,5,6,6,6,0,0,136,80,32,80,136,248,5,5,
5,6,0,0,136,80,32,80,112,5,6,6,6,0,0,120,
128,240,136,136,112,4,5,5,6,0,0,240,128,224,144,96,
3,6,6,6,1,0,64,224,64,64,64,64,3,6,6,6,
1,255,64,224,64,64,64,128,5,5,5,6,0,0,136,80,
112,80,136,5,6,6,6,0,255,112,136,136,240,128,112,4,
5,5,6,0,0,112,128,128,128,112,2,8,8,6,1,255,
64,0,192,64,64,64,64,128,5,7,7,6,0,0,112,136,
136,248,136,136,112,4,5,5,6,0,0,112,128,224,128,112,
4,5,5,6,0,0,224,16,112,16,224,5,7,7,6,0,
0,128,240,136,136,136,240,128,4,7,7,6,0,255,128,224,
144,144,144,224,128,5,6,6,6,0,0,112,136,128,128,136,
112,5,6,6,6,0,0,136,216,168,136,136,136,5,6,6,
6,0,255,136,216,168,136,136,128,5,8,8,6,0,255,112,
136,136,136,112,64,224,64,5,6,6,6,0,0,112,136,8,
8,136,112,5,6,6,6,0,0,112,136,160,128,136,112,5,
6,6,6,0,0,112,136,40,8,136,112};

192
Marlin/dogm_font_data_ISO10646_Kana.h Normal file
View file

@ -0,0 +1,192 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: ISO10646_Kana
Copyright: A. Hardtung, public domain
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 5 h= 8 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_Kana_5x7[2482] U8G_SECTION(".progmem.ISO10646_Kana_5x7") = {
0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7,
255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1,
0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80,
136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64,
5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0,
0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128,
128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120,
5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0,
0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136,
136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136,
136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8,
8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6,
0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192,
64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168,
168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6,
0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136,
240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5,
5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0,
112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64,
72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5,
6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136,
168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6,
6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0,
248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64,
64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3,
7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6,
0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 3, 3, 6, 0, 1,
248, 0, 248, 4, 4, 4, 6, 0, 0, 240, 16, 96, 64, 5, 6, 6,
6, 0, 0, 248, 8, 40, 48, 32, 64, 3, 4, 4, 6, 1, 0, 32,
64, 192, 64, 4, 6, 6, 6, 0, 0, 16, 32, 96, 160, 32, 32, 4,
4, 4, 6, 0, 0, 32, 240, 144, 32, 5, 6, 6, 6, 0, 0, 32,
248, 136, 8, 16, 32, 3, 4, 4, 6, 1, 0, 224, 64, 64, 224, 5,
5, 5, 6, 0, 0, 248, 32, 32, 32, 248, 4, 4, 4, 6, 0, 0,
32, 240, 96, 160, 5, 6, 6, 6, 0, 0, 16, 248, 48, 80, 144, 16,
5, 6, 6, 6, 0, 0, 64, 248, 72, 72, 72, 144, 5, 8, 8, 6,
0, 0, 40, 0, 64, 248, 72, 72, 72, 144, 5, 6, 6, 6, 0, 0,
32, 248, 32, 248, 32, 32, 5, 8, 8, 6, 0, 0, 40, 0, 32, 248,
32, 248, 32, 32, 4, 5, 5, 6, 0, 0, 112, 144, 16, 32, 192, 5,
7, 7, 6, 0, 0, 40, 0, 112, 144, 16, 32, 192, 5, 6, 6, 6,
0, 0, 64, 120, 144, 16, 16, 32, 5, 8, 8, 6, 0, 0, 40, 0,
64, 120, 144, 16, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 8, 8,
248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 8, 248, 5, 6,
6, 6, 0, 0, 80, 248, 80, 16, 32, 64, 5, 8, 8, 6, 0, 0,
40, 0, 80, 248, 80, 16, 32, 64, 5, 5, 5, 6, 0, 0, 192, 8,
200, 16, 224, 5, 7, 7, 6, 0, 0, 40, 0, 192, 8, 200, 16, 224,
5, 5, 5, 6, 0, 0, 248, 16, 32, 80, 136, 5, 7, 7, 6, 0,
0, 40, 0, 248, 16, 32, 80, 136, 5, 6, 6, 6, 0, 0, 64, 248,
72, 80, 64, 56, 5, 8, 8, 6, 0, 0, 40, 0, 64, 248, 72, 80,
64, 56, 5, 5, 5, 6, 0, 0, 136, 136, 72, 16, 96, 5, 7, 7,
6, 0, 0, 40, 0, 136, 136, 72, 16, 96, 5, 5, 5, 6, 0, 0,
120, 72, 168, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 120, 72, 168,
16, 96, 5, 6, 6, 6, 0, 0, 16, 224, 32, 248, 32, 64, 5, 8,
8, 6, 0, 0, 40, 0, 16, 224, 32, 248, 32, 64, 5, 4, 4, 6,
0, 0, 168, 168, 8, 48, 5, 5, 5, 6, 0, 0, 168, 168, 8, 16,
32, 5, 7, 7, 6, 0, 0, 40, 0, 168, 168, 8, 16, 32, 5, 6,
6, 6, 0, 0, 112, 0, 248, 32, 32, 64, 5, 8, 8, 6, 0, 0,
40, 0, 112, 0, 248, 32, 32, 64, 3, 6, 6, 6, 1, 0, 128, 128,
192, 160, 128, 128, 4, 8, 8, 6, 1, 0, 80, 0, 128, 128, 192, 160,
128, 128, 5, 6, 6, 6, 0, 0, 32, 248, 32, 32, 64, 128, 5, 5,
5, 6, 0, 0, 112, 0, 0, 0, 248, 5, 5, 5, 6, 0, 0, 248,
8, 80, 32, 208, 5, 6, 6, 6, 0, 0, 32, 248, 16, 32, 112, 168,
3, 6, 6, 6, 1, 0, 32, 32, 32, 32, 64, 128, 5, 5, 5, 6,
0, 0, 16, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 40, 0, 16,
136, 136, 136, 136, 5, 8, 8, 6, 0, 0, 24, 24, 0, 16, 136, 136,
136, 136, 5, 6, 6, 6, 0, 0, 128, 128, 248, 128, 128, 120, 5, 7,
7, 6, 0, 0, 40, 128, 128, 248, 128, 128, 120, 5, 7, 7, 6, 0,
0, 24, 152, 128, 248, 128, 128, 120, 5, 5, 5, 6, 0, 0, 248, 8,
8, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 16, 96,
5, 8, 8, 6, 0, 0, 24, 24, 0, 248, 8, 8, 16, 96, 5, 4,
4, 6, 0, 1, 64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 40, 0,
64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 24, 24, 64, 160, 16, 8,
5, 6, 6, 6, 0, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6,
0, 0, 40, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6, 0, 0,
24, 24, 32, 248, 32, 168, 168, 32, 5, 5, 5, 6, 0, 0, 248, 8,
80, 32, 16, 4, 5, 5, 6, 1, 0, 224, 0, 224, 0, 240, 5, 5,
5, 6, 0, 0, 32, 64, 136, 248, 8, 5, 5, 5, 6, 0, 0, 8,
40, 16, 40, 192, 5, 5, 5, 6, 0, 0, 248, 64, 248, 64, 56, 5,
4, 4, 6, 0, 0, 64, 248, 80, 64, 5, 6, 6, 6, 0, 0, 64,
248, 72, 80, 64, 64, 4, 4, 4, 6, 0, 0, 96, 32, 32, 240, 5,
5, 5, 6, 0, 0, 112, 16, 16, 16, 248, 4, 5, 5, 6, 0, 0,
240, 16, 240, 16, 240, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 248,
5, 6, 6, 6, 0, 0, 112, 0, 248, 8, 16, 32, 4, 6, 6, 6,
0, 0, 144, 144, 144, 144, 16, 32, 5, 5, 5, 6, 0, 0, 32, 160,
168, 168, 176, 4, 5, 5, 6, 0, 0, 128, 128, 144, 160, 192, 5, 5,
5, 6, 0, 0, 248, 136, 136, 136, 248, 4, 4, 4, 6, 0, 0, 240,
144, 16, 32, 5, 5, 5, 6, 0, 0, 248, 136, 8, 16, 32, 5, 6,
6, 6, 0, 0, 16, 248, 80, 80, 248, 16, 5, 5, 5, 6, 0, 0,
248, 8, 48, 32, 248, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 48,
5, 5, 5, 6, 0, 0, 192, 8, 8, 16, 224, 5, 8, 8, 6, 0,
0, 40, 0, 32, 248, 136, 8, 16, 32, 4, 4, 4, 6, 0, 0, 64,
240, 80, 160, 4, 4, 4, 6, 0, 0, 64, 240, 32, 64, 5, 7, 7,
6, 0, 0, 40, 0, 248, 136, 8, 16, 96, 5, 8, 8, 6, 0, 0,
40, 0, 16, 248, 80, 80, 248, 16, 5, 7, 7, 6, 0, 0, 40, 0,
248, 8, 48, 32, 248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 248,
8, 48, 2, 2, 2, 6, 2, 2, 192, 192, 5, 1, 1, 6, 0, 2,
248, 5, 4, 4, 6, 0, 1, 128, 96, 16, 8, 5, 5, 5, 6, 0,
1, 40, 128, 96, 16, 8, 5, 6, 6, 6, 0, 0, 248, 8, 8, 8,
8, 8
};

151
Marlin/dogm_font_data_ISO10646_SK.h Normal file
View file

@ -0,0 +1,151 @@
/*
Fontname: ISO10646_SK
Copyright: A. Hardtung, modified by Roman Moravcik
Capital A Height: 7, '1' Height: 7
Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-1 dx= 0 dy= 0
Pure Font ascent = 7 descent=-1
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_SK[2203] U8G_SECTION(".progmem.ISO10646_SK") = {
0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0,
0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,80,
0,112,136,136,248,136,136,5,8,8,6,0,0,8,16,248,
128,128,240,128,248,3,8,8,6,1,0,32,64,224,64,64,
64,64,224,5,8,8,6,0,0,16,32,112,136,136,136,136,
112,5,8,8,6,0,0,32,80,112,136,136,136,136,112,5,
8,8,6,0,0,16,32,136,136,136,136,136,112,5,8,8,
6,0,0,16,32,136,136,80,32,32,32,5,8,8,6,0,
0,16,32,0,112,8,120,136,120,5,7,7,6,0,0,80,
0,112,8,120,136,120,5,8,8,6,0,0,16,32,0,112,
136,248,128,112,2,8,8,6,2,0,64,128,0,128,128,128,
128,128,5,8,8,6,0,0,16,32,0,112,136,136,136,112,
5,8,8,6,0,0,32,80,0,112,136,136,136,112,5,8,
8,6,0,0,16,32,0,136,136,136,152,104,5,9,9,6,
0,255,16,32,0,136,136,136,120,8,112,5,8,8,6,0,
0,80,32,112,136,128,128,136,112,5,8,8,6,0,0,80,
32,0,112,128,128,136,112,5,8,8,6,0,0,80,32,240,
136,136,136,136,240,6,8,8,6,0,0,4,20,24,112,144,
144,144,112,5,8,8,6,0,0,16,32,128,128,128,128,128,
248,3,8,8,6,1,0,32,64,0,192,64,64,64,224,5,
8,8,6,0,0,16,144,160,128,128,128,128,248,5,8,8,
6,1,0,8,200,80,64,64,64,64,224,5,8,8,6,0,
0,80,32,136,200,168,152,136,136,5,8,8,6,0,0,80,
32,0,176,200,136,136,136,5,8,8,6,0,0,16,32,240,
136,240,160,144,136,5,8,8,6,0,0,16,32,0,176,200,
128,128,128,5,8,8,6,0,0,80,32,120,128,128,112,8,
240,5,8,8,6,0,0,80,32,0,112,128,112,8,240,5,
8,8,6,0,0,80,32,248,32,32,32,32,32,6,8,8,
6,0,0,4,68,72,224,64,64,64,48,5,8,8,6,0,
0,80,32,248,8,48,64,128,248,5,8,8,6,0,0,80,
32,0,248,16,32,64,248,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
0,0,6,0,0,0,0,0,6,0,0};

45
Marlin/dogm_font_data_Marlin_symbols.h Normal file
View file

@ -0,0 +1,45 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
Fontname: Marlin_symbols
Copyright: Created with Fony 1.4.7
Capital A Height: 0, '1' Height: 0
Calculated Max Values w= 5 h=10 x= 0 y= 3 dx= 6 dy= 0 ascent= 8 len=10
Font Bounding box w= 6 h= 9 x= 0 y=-2
Calculated Min Values x= 0 y=-2 dx= 0 dy= 0
Pure Font ascent = 0 descent= 0
X Font ascent = 0 descent= 0
Max Font ascent = 8 descent=-2
*/
#include <U8glib.h>
const u8g_fntpgm_uint8_t Marlin_symbols[140] U8G_SECTION(".progmem.Marlin_symbols") = {
0, 6, 9, 0, 254, 0, 0, 0, 0, 0, 1, 9, 0, 8, 254, 0,
0, 5, 8, 8, 6, 0, 0, 64, 240, 200, 136, 136, 152, 120, 16, 5,
8, 8, 6, 0, 0, 192, 248, 136, 136, 136, 136, 136, 248, 5, 5, 5,
6, 0, 1, 32, 48, 248, 48, 32, 5, 8, 8, 6, 0, 0, 32, 112,
248, 32, 32, 32, 32, 224, 5, 9, 9, 6, 0, 255, 32, 112, 168, 168,
184, 136, 136, 112, 32, 5, 9, 9, 6, 0, 255, 224, 128, 192, 176, 168,
40, 48, 40, 40, 5, 9, 9, 6, 0, 255, 248, 168, 136, 136, 136, 136,
136, 168, 248, 5, 10, 10, 6, 0, 254, 32, 80, 80, 80, 80, 136, 168,
168, 136, 112, 3, 3, 3, 6, 0, 3, 64, 160, 64
};

73
Marlin/drivers.h Normal file
View file

@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef _DRIVERS_H_
#define _DRIVERS_H_
#include "MarlinConfig.h"
#define A4988 0x001
#define DRV8825 0x002
#define LV8729 0x003
#define L6470 0x104
#define TB6560 0x005
#define TB6600 0x006
#define TMC2100 0x007
#define TMC2130 0x108
#define TMC2130_STANDALONE 0x008
#define TMC2208 0x109
#define TMC2208_STANDALONE 0x009
#define TMC26X 0x10A
#define TMC26X_STANDALONE 0x00A
#define TMC2660 0x10B
#define TMC2660_STANDALONE 0x00B
#define _AXIS_DRIVER_TYPE(A,T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) )
#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
#define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T)
#define AXIS_DRIVER_TYPE_X2(T) (ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && _AXIS_DRIVER_TYPE(X2,T)
#define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T))
#define AXIS_DRIVER_TYPE_Z2(T) (ENABLED(Z_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Z2,T))
#define AXIS_DRIVER_TYPE_E0(T) (E_STEPPERS > 0 && _AXIS_DRIVER_TYPE(E0,T))
#define AXIS_DRIVER_TYPE_E1(T) (E_STEPPERS > 1 && _AXIS_DRIVER_TYPE(E1,T))
#define AXIS_DRIVER_TYPE_E2(T) (E_STEPPERS > 2 && _AXIS_DRIVER_TYPE(E2,T))
#define AXIS_DRIVER_TYPE_E3(T) (E_STEPPERS > 3 && _AXIS_DRIVER_TYPE(E3,T))
#define AXIS_DRIVER_TYPE_E4(T) (E_STEPPERS > 4 && _AXIS_DRIVER_TYPE(E4,T))
#define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T)
#define HAS_DRIVER(T) (AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) || \
AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) || \
AXIS_DRIVER_TYPE_Z(T) || AXIS_DRIVER_TYPE_Z2(T) || \
AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) || \
AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) || \
AXIS_DRIVER_TYPE_E4(T) )
// Test for supported TMC drivers that require advanced configuration
// Does not match standalone configurations
#define HAS_TRINAMIC (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE_##A(TMC2130) || \
AXIS_DRIVER_TYPE_##A(TMC2208) )
#endif // _DRIVERS_H_

170
Marlin/duration_t.h Normal file
View file

@ -0,0 +1,170 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __DURATION_T__
#define __DURATION_T__
#include <stdio.h>
#include <inttypes.h>
struct duration_t {
/**
* @brief Duration is stored in seconds
*/
uint32_t value;
/**
* @brief Constructor
*/
duration_t()
: duration_t(0) {};
/**
* @brief Constructor
*
* @param seconds The number of seconds
*/
duration_t(uint32_t const &seconds) {
this->value = seconds;
}
/**
* @brief Equality comparison
* @details Overloads the equality comparison operator
*
* @param value The number of seconds to compare to
* @return True if both durations are equal
*/
bool operator==(const uint32_t &value) const {
return (this->value == value);
}
/**
* @brief Inequality comparison
* @details Overloads the inequality comparison operator
*
* @param value The number of seconds to compare to
* @return False if both durations are equal
*/
bool operator!=(const uint32_t &value) const {
return ! this->operator==(value);
}
/**
* @brief Formats the duration as years
* @return The number of years
*/
inline uint8_t year() const {
return this->day() / 365;
}
/**
* @brief Formats the duration as days
* @return The number of days
*/
inline uint16_t day() const {
return this->hour() / 24;
}
/**
* @brief Formats the duration as hours
* @return The number of hours
*/
inline uint32_t hour() const {
return this->minute() / 60;
}
/**
* @brief Formats the duration as minutes
* @return The number of minutes
*/
inline uint32_t minute() const {
return this->second() / 60;
}
/**
* @brief Formats the duration as seconds
* @return The number of seconds
*/
inline uint32_t second() const {
return this->value;
}
/**
* @brief Formats the duration as a string
* @details String will be formated using a "full" representation of duration
*
* @param buffer The array pointed to must be able to accommodate 21 bytes
*
* Output examples:
* 123456789012345678901 (strlen)
* 135y 364d 23h 59m 59s
* 364d 23h 59m 59s
* 23h 59m 59s
* 59m 59s
* 59s
*/
void toString(char *buffer) const {
int y = this->year(),
d = this->day() % 365,
h = this->hour() % 24,
m = this->minute() % 60,
s = this->second() % 60;
if (y) sprintf_P(buffer, PSTR("%iy %id %ih %im %is"), y, d, h, m, s);
else if (d) sprintf_P(buffer, PSTR("%id %ih %im %is"), d, h, m, s);
else if (h) sprintf_P(buffer, PSTR("%ih %im %is"), h, m, s);
else if (m) sprintf_P(buffer, PSTR("%im %is"), m, s);
else sprintf_P(buffer, PSTR("%is"), s);
}
/**
* @brief Formats the duration as a string
* @details String will be formated using a "digital" representation of duration
*
* @param buffer The array pointed to must be able to accommodate 10 bytes
*
* Output examples:
* 123456789 (strlen)
* 99:59
* 11d 12:33
*/
uint8_t toDigital(char *buffer, bool with_days=false) const {
uint16_t h = uint16_t(this->hour()),
m = uint16_t(this->minute() % 60UL);
if (with_days) {
uint16_t d = this->day();
sprintf_P(buffer, PSTR("%ud %02u:%02u"), d, h % 24, m);
return d >= 10 ? 9 : 8;
}
else if (h < 100) {
sprintf_P(buffer, PSTR("%02u:%02u"), h, m);
return 5;
}
else {
sprintf_P(buffer, PSTR("%u:%02u"), h, m);
return 6;
}
}
};
#endif // __DURATION_T__

40
Marlin/emergency_parser.cpp Normal file
View file

@ -0,0 +1,40 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* emergency_parser.cpp - Intercept special commands directly in the serial stream
*/
#include "MarlinConfig.h"
#if ENABLED(EMERGENCY_PARSER)
#include "emergency_parser.h"
// Static data members
bool EmergencyParser::killed_by_M112; // = false
EmergencyParser::State EmergencyParser::state; // = EP_RESET
// Global instance
EmergencyParser emergency_parser;
#endif // EMERGENCY_PARSER

144
Marlin/emergency_parser.h Normal file
View file

@ -0,0 +1,144 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* emergency_parser.h - Intercept special commands directly in the serial stream
*/
#ifndef _EMERGENCY_PARSER_H_
#define _EMERGENCY_PARSER_H_
// External references
extern volatile bool wait_for_user, wait_for_heatup;
void quickstop_stepper();
class EmergencyParser {
public:
// Currently looking for: M108, M112, M410
enum State : char {
EP_RESET,
EP_N,
EP_M,
EP_M1,
EP_M10,
EP_M108,
EP_M11,
EP_M112,
EP_M4,
EP_M41,
EP_M410,
EP_IGNORE // to '\n'
};
static bool killed_by_M112;
static State state;
EmergencyParser() {}
__attribute__((always_inline)) inline
static void update(const uint8_t c) {
switch (state) {
case EP_RESET:
switch (c) {
case ' ': break;
case 'N': state = EP_N; break;
case 'M': state = EP_M; break;
default: state = EP_IGNORE;
}
break;
case EP_N:
switch (c) {
case '0': case '1': case '2':
case '3': case '4': case '5':
case '6': case '7': case '8':
case '9': case '-': case ' ': break;
case 'M': state = EP_M; break;
default: state = EP_IGNORE;
}
break;
case EP_M:
switch (c) {
case ' ': break;
case '1': state = EP_M1; break;
case '4': state = EP_M4; break;
default: state = EP_IGNORE;
}
break;
case EP_M1:
switch (c) {
case '0': state = EP_M10; break;
case '1': state = EP_M11; break;
default: state = EP_IGNORE;
}
break;
case EP_M10:
state = (c == '8') ? EP_M108 : EP_IGNORE;
break;
case EP_M11:
state = (c == '2') ? EP_M112 : EP_IGNORE;
break;
case EP_M4:
state = (c == '1') ? EP_M41 : EP_IGNORE;
break;
case EP_M41:
state = (c == '0') ? EP_M410 : EP_IGNORE;
break;
case EP_IGNORE:
if (c == '\n') state = EP_RESET;
break;
default:
if (c == '\n') {
switch (state) {
case EP_M108:
wait_for_user = wait_for_heatup = false;
break;
case EP_M112:
killed_by_M112 = true;
break;
case EP_M410:
quickstop_stepper();
break;
default:
break;
}
state = EP_RESET;
}
}
}
};
extern EmergencyParser emergency_parser;
#endif // _EMERGENCY_PARSER_H_

239
Marlin/endstop_interrupts.h Normal file
View file

@ -0,0 +1,239 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the temperature-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate either an
* 'external interrupt' or a 'pin change interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#ifndef _ENDSTOP_INTERRUPTS_H_
#define _ENDSTOP_INTERRUPTS_H_
#include "macros.h"
// One ISR for all EXT-Interrupts
void endstop_ISR(void) { endstops.update(); }
/**
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
*
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
* So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
* There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
*/
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
#undef digitalPinToPCICR
#define digitalPinToPCICR(p) ( WITHIN(p, 10, 15) || \
WITHIN(p, 50, 53) || \
WITHIN(p, 62, 69) ? &PCICR : (uint8_t*)0 )
#undef digitalPinToPCICRbit
#define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
WITHIN(p, 14, 15) ? 1 : \
WITHIN(p, 62, 69) ? 2 : \
0 )
#undef digitalPinToPCMSK
#define digitalPinToPCMSK(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \
WITHIN(p, 14, 15) ? &PCMSK1 : \
WITHIN(p, 62, 69) ? &PCMSK2 : \
(uint8_t *)0 )
#undef digitalPinToPCMSKbit
#define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \
(p) == 14 || (p) == 51 ? 2 : \
(p) == 15 || (p) == 52 ? 1 : \
(p) == 50 ? 3 : \
(p) == 53 ? 0 : \
WITHIN(p, 62, 69) ? ((p) - 62) : \
0 )
#endif
// Install Pin change interrupt for a pin. Can be called multiple times.
void pciSetup(const int8_t pin) {
SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin)); // enable pin
SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
}
// Handlers for pin change interrupts
#ifdef PCINT0_vect
ISR(PCINT0_vect) { endstop_ISR(); }
#endif
#ifdef PCINT1_vect
ISR(PCINT1_vect) { endstop_ISR(); }
#endif
#ifdef PCINT2_vect
ISR(PCINT2_vect) { endstop_ISR(); }
#endif
#ifdef PCINT3_vect
ISR(PCINT3_vect) { endstop_ISR(); }
#endif
void setup_endstop_interrupts( void ) {
#if HAS_X_MAX
#if digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT // if pin has an external interrupt
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
pciSetup(X_MAX_PIN); // assign it
#endif
#endif
#if HAS_X_MIN
#if digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
pciSetup(X_MIN_PIN);
#endif
#endif
#if HAS_Y_MAX
#if digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "Y_MAX_PIN is not interrupt-capable");
pciSetup(Y_MAX_PIN);
#endif
#endif
#if HAS_Y_MIN
#if digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
pciSetup(Y_MIN_PIN);
#endif
#endif
#if HAS_Z_MAX
#if digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "Z_MAX_PIN is not interrupt-capable");
pciSetup(Z_MAX_PIN);
#endif
#endif
#if HAS_Z_MIN
#if digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
pciSetup(Z_MIN_PIN);
#endif
#endif
#if HAS_X2_MAX
#if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X2_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X2_MAX_PIN) != NULL, "X2_MAX_PIN is not interrupt-capable");
pciSetup(X2_MAX_PIN);
#endif
#endif
#if HAS_X2_MIN
#if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X2_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X2_MIN_PIN) != NULL, "X2_MIN_PIN is not interrupt-capable");
pciSetup(X2_MIN_PIN);
#endif
#endif
#if HAS_Y2_MAX
#if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y2_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y2_MAX_PIN) != NULL, "Y2_MAX_PIN is not interrupt-capable");
pciSetup(Y2_MAX_PIN);
#endif
#endif
#if HAS_Y2_MIN
#if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y2_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y2_MIN_PIN) != NULL, "Y2_MIN_PIN is not interrupt-capable");
pciSetup(Y2_MIN_PIN);
#endif
#endif
#if HAS_Z2_MAX
#if digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "Z2_MAX_PIN is not interrupt-capable");
pciSetup(Z2_MAX_PIN);
#endif
#endif
#if HAS_Z2_MIN
#if digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "Z2_MIN_PIN is not interrupt-capable");
pciSetup(Z2_MIN_PIN);
#endif
#endif
#if HAS_Z_MIN_PROBE_PIN
#if digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "Z_MIN_PROBE_PIN is not interrupt-capable");
pciSetup(Z_MIN_PROBE_PIN);
#endif
#endif
// If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
}
#endif // _ENDSTOP_INTERRUPTS_H_

774
Marlin/endstops.cpp Normal file
View file

@ -0,0 +1,774 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* endstops.cpp - A singleton object to manage endstops
*/
#include "Marlin.h"
#include "cardreader.h"
#include "endstops.h"
#include "temperature.h"
#include "stepper.h"
#include "ultralcd.h"
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
#include "endstop_interrupts.h"
#endif
Endstops endstops;
// public:
bool Endstops::enabled, Endstops::enabled_globally; // Initialized by settings.load()
volatile uint8_t Endstops::hit_state;
Endstops::esbits_t Endstops::live_state = 0;
#if ENABLED(ENDSTOP_NOISE_FILTER)
Endstops::esbits_t Endstops::validated_live_state;
uint8_t Endstops::endstop_poll_count;
#endif
#if HAS_BED_PROBE
volatile bool Endstops::z_probe_enabled = false;
#endif
// Initialized by settings.load()
#if ENABLED(X_DUAL_ENDSTOPS)
float Endstops::x_endstop_adj;
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
float Endstops::y_endstop_adj;
#endif
#if ENABLED(Z_DUAL_ENDSTOPS)
float Endstops::z_endstop_adj;
#endif
/**
* Class and Instance Methods
*/
void Endstops::init() {
#if HAS_X_MIN
#if ENABLED(ENDSTOPPULLUP_XMIN)
SET_INPUT_PULLUP(X_MIN_PIN);
#else
SET_INPUT(X_MIN_PIN);
#endif
#endif
#if HAS_X2_MIN
#if ENABLED(ENDSTOPPULLUP_XMIN)
SET_INPUT_PULLUP(X2_MIN_PIN);
#else
SET_INPUT(X2_MIN_PIN);
#endif
#endif
#if HAS_Y_MIN
#if ENABLED(ENDSTOPPULLUP_YMIN)
SET_INPUT_PULLUP(Y_MIN_PIN);
#else
SET_INPUT(Y_MIN_PIN);
#endif
#endif
#if HAS_Y2_MIN
#if ENABLED(ENDSTOPPULLUP_YMIN)
SET_INPUT_PULLUP(Y2_MIN_PIN);
#else
SET_INPUT(Y2_MIN_PIN);
#endif
#endif
#if HAS_Z_MIN
#if ENABLED(ENDSTOPPULLUP_ZMIN)
SET_INPUT_PULLUP(Z_MIN_PIN);
#else
SET_INPUT(Z_MIN_PIN);
#endif
#endif
#if HAS_Z2_MIN
#if ENABLED(ENDSTOPPULLUP_ZMIN)
SET_INPUT_PULLUP(Z2_MIN_PIN);
#else
SET_INPUT(Z2_MIN_PIN);
#endif
#endif
#if HAS_X_MAX
#if ENABLED(ENDSTOPPULLUP_XMAX)
SET_INPUT_PULLUP(X_MAX_PIN);
#else
SET_INPUT(X_MAX_PIN);
#endif
#endif
#if HAS_X2_MAX
#if ENABLED(ENDSTOPPULLUP_XMAX)
SET_INPUT_PULLUP(X2_MAX_PIN);
#else
SET_INPUT(X2_MAX_PIN);
#endif
#endif
#if HAS_Y_MAX
#if ENABLED(ENDSTOPPULLUP_YMAX)
SET_INPUT_PULLUP(Y_MAX_PIN);
#else
SET_INPUT(Y_MAX_PIN);
#endif
#endif
#if HAS_Y2_MAX
#if ENABLED(ENDSTOPPULLUP_YMAX)
SET_INPUT_PULLUP(Y2_MAX_PIN);
#else
SET_INPUT(Y2_MAX_PIN);
#endif
#endif
#if HAS_Z_MAX
#if ENABLED(ENDSTOPPULLUP_ZMAX)
SET_INPUT_PULLUP(Z_MAX_PIN);
#else
SET_INPUT(Z_MAX_PIN);
#endif
#endif
#if HAS_Z2_MAX
#if ENABLED(ENDSTOPPULLUP_ZMAX)
SET_INPUT_PULLUP(Z2_MAX_PIN);
#else
SET_INPUT(Z2_MAX_PIN);
#endif
#endif
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
#if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE)
SET_INPUT_PULLUP(Z_MIN_PROBE_PIN);
#else
SET_INPUT(Z_MIN_PROBE_PIN);
#endif
#endif
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
setup_endstop_interrupts();
#endif
// Enable endstops
enable_globally(
#if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT)
true
#else
false
#endif
);
} // Endstops::init
// Called at ~1KHz from Temperature ISR: Poll endstop state if required
void Endstops::poll() {
#if ENABLED(PINS_DEBUGGING)
run_monitor(); // report changes in endstop status
#endif
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && ENABLED(ENDSTOP_NOISE_FILTER)
if (endstop_poll_count) update();
#elif DISABLED(ENDSTOP_INTERRUPTS_FEATURE) || ENABLED(ENDSTOP_NOISE_FILTER)
update();
#endif
}
void Endstops::enable_globally(const bool onoff) {
enabled_globally = enabled = onoff;
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
update();
#endif
}
// Enable / disable endstop checking
void Endstops::enable(const bool onoff) {
enabled = onoff;
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
update();
#endif
}
// Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
void Endstops::not_homing() {
enabled = enabled_globally;
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
update();
#endif
}
#if ENABLED(VALIDATE_HOMING_ENDSTOPS)
// If the last move failed to trigger an endstop, call kill
void Endstops::validate_homing_move() {
if (trigger_state()) hit_on_purpose();
else kill(PSTR(MSG_ERR_HOMING_FAILED));
}
#endif
// Enable / disable endstop z-probe checking
#if HAS_BED_PROBE
void Endstops::enable_z_probe(const bool onoff) {
z_probe_enabled = onoff;
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
update();
#endif
}
#endif
#if ENABLED(PINS_DEBUGGING)
void Endstops::run_monitor() {
if (!monitor_flag) return;
static uint8_t monitor_count = 16; // offset this check from the others
monitor_count += _BV(1); // 15 Hz
monitor_count &= 0x7F;
if (!monitor_count) monitor(); // report changes in endstop status
}
#endif
void Endstops::event_handler() {
static uint8_t prev_hit_state; // = 0
if (hit_state && hit_state != prev_hit_state) {
#if ENABLED(ULTRA_LCD)
char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' ';
#define _SET_STOP_CHAR(A,C) (chr## A = C)
#else
#define _SET_STOP_CHAR(A,C) ;
#endif
#define _ENDSTOP_HIT_ECHO(A,C) do{ \
SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", planner.triggered_position_mm(_AXIS(A))); \
_SET_STOP_CHAR(A,C); }while(0)
#define _ENDSTOP_HIT_TEST(A,C) \
if (TEST(hit_state, A ##_MIN) || TEST(hit_state, A ##_MAX)) \
_ENDSTOP_HIT_ECHO(A,C)
#define ENDSTOP_HIT_TEST_X() _ENDSTOP_HIT_TEST(X,'X')
#define ENDSTOP_HIT_TEST_Y() _ENDSTOP_HIT_TEST(Y,'Y')
#define ENDSTOP_HIT_TEST_Z() _ENDSTOP_HIT_TEST(Z,'Z')
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
ENDSTOP_HIT_TEST_X();
ENDSTOP_HIT_TEST_Y();
ENDSTOP_HIT_TEST_Z();
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
#define P_AXIS Z_AXIS
if (TEST(hit_state, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
#endif
SERIAL_EOL();
#if ENABLED(ULTRA_LCD)
lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
#endif
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
if (planner.abort_on_endstop_hit) {
card.sdprinting = false;
card.closefile();
quickstop_stepper();
thermalManager.disable_all_heaters(); // switch off all heaters.
}
#endif
}
prev_hit_state = hit_state;
} // Endstops::report_state
static void print_es_state(const bool is_hit, const char * const label=NULL) {
if (label) serialprintPGM(label);
SERIAL_PROTOCOLPGM(": ");
serialprintPGM(is_hit ? PSTR(MSG_ENDSTOP_HIT) : PSTR(MSG_ENDSTOP_OPEN));
SERIAL_EOL();
}
void _O2 Endstops::M119() {
SERIAL_PROTOCOLLNPGM(MSG_M119_REPORT);
#define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S))
#if HAS_X_MIN
ES_REPORT(X_MIN);
#endif
#if HAS_X2_MIN
ES_REPORT(X2_MIN);
#endif
#if HAS_X_MAX
ES_REPORT(X_MAX);
#endif
#if HAS_X2_MAX
ES_REPORT(X2_MAX);
#endif
#if HAS_Y_MIN
ES_REPORT(Y_MIN);
#endif
#if HAS_Y2_MIN
ES_REPORT(Y2_MIN);
#endif
#if HAS_Y_MAX
ES_REPORT(Y_MAX);
#endif
#if HAS_Y2_MAX
ES_REPORT(Y2_MAX);
#endif
#if HAS_Z_MIN
ES_REPORT(Z_MIN);
#endif
#if HAS_Z2_MIN
ES_REPORT(Z2_MIN);
#endif
#if HAS_Z_MAX
ES_REPORT(Z_MAX);
#endif
#if HAS_Z2_MAX
ES_REPORT(Z2_MAX);
#endif
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
print_es_state(READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING, PSTR(MSG_Z_PROBE));
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#if NUM_RUNOUT_SENSORS == 1
print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING, PSTR(MSG_FILAMENT_RUNOUT_SENSOR));
#else
for (uint8_t i = 1; i <= NUM_RUNOUT_SENSORS; i++) {
pin_t pin;
switch (i) {
default: continue;
case 1: pin = FIL_RUNOUT_PIN; break;
case 2: pin = FIL_RUNOUT2_PIN; break;
#if NUM_RUNOUT_SENSORS > 2
case 3: pin = FIL_RUNOUT3_PIN; break;
#if NUM_RUNOUT_SENSORS > 3
case 4: pin = FIL_RUNOUT4_PIN; break;
#if NUM_RUNOUT_SENSORS > 4
case 5: pin = FIL_RUNOUT5_PIN; break;
#endif
#endif
#endif
}
SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
if (i > 1) { SERIAL_CHAR(' '); SERIAL_CHAR('0' + i); }
print_es_state(digitalRead(pin) != FIL_RUNOUT_INVERTING);
}
#endif
#endif
} // Endstops::M119
// The following routines are called from an ISR context. It could be the temperature ISR, the
// endstop ISR or the Stepper ISR.
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
// Check endstops - Could be called from Temperature ISR!
void Endstops::update() {
#if DISABLED(ENDSTOP_NOISE_FILTER)
if (!abort_enabled()) return;
#endif
#define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
#define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT))
#if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
// If G38 command is active check Z_MIN_PROBE for ALL movement
if (G38_move) UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
#endif
// With Dual X, endstops are only checked in the homing direction for the active extruder
#if ENABLED(DUAL_X_CARRIAGE)
#define E0_ACTIVE stepper.movement_extruder() == 0
#define X_MIN_TEST ((X_HOME_DIR < 0 && E0_ACTIVE) || (X2_HOME_DIR < 0 && !E0_ACTIVE))
#define X_MAX_TEST ((X_HOME_DIR > 0 && E0_ACTIVE) || (X2_HOME_DIR > 0 && !E0_ACTIVE))
#else
#define X_MIN_TEST true
#define X_MAX_TEST true
#endif
// Use HEAD for core axes, AXIS for others
#if CORE_IS_XY || CORE_IS_XZ
#define X_AXIS_HEAD X_HEAD
#else
#define X_AXIS_HEAD X_AXIS
#endif
#if CORE_IS_XY || CORE_IS_YZ
#define Y_AXIS_HEAD Y_HEAD
#else
#define Y_AXIS_HEAD Y_AXIS
#endif
#if CORE_IS_XZ || CORE_IS_YZ
#define Z_AXIS_HEAD Z_HEAD
#else
#define Z_AXIS_HEAD Z_AXIS
#endif
/**
* Check and update endstops
*/
#if HAS_X_MIN
#if ENABLED(X_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(X, MIN);
#if HAS_X2_MIN
UPDATE_ENDSTOP_BIT(X2, MIN);
#else
COPY_LIVE_STATE(X_MIN, X2_MIN);
#endif
#else
UPDATE_ENDSTOP_BIT(X, MIN);
#endif
#endif
#if HAS_X_MAX
#if ENABLED(X_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(X, MAX);
#if HAS_X2_MAX
UPDATE_ENDSTOP_BIT(X2, MAX);
#else
COPY_LIVE_STATE(X_MAX, X2_MAX);
#endif
#else
UPDATE_ENDSTOP_BIT(X, MAX);
#endif
#endif
#if HAS_Y_MIN
#if ENABLED(Y_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(Y, MIN);
#if HAS_Y2_MIN
UPDATE_ENDSTOP_BIT(Y2, MIN);
#else
COPY_LIVE_STATE(Y_MIN, Y2_MIN);
#endif
#else
UPDATE_ENDSTOP_BIT(Y, MIN);
#endif
#endif
#if HAS_Y_MAX
#if ENABLED(Y_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(Y, MAX);
#if HAS_Y2_MAX
UPDATE_ENDSTOP_BIT(Y2, MAX);
#else
COPY_LIVE_STATE(Y_MAX, Y2_MAX);
#endif
#else
UPDATE_ENDSTOP_BIT(Y, MAX);
#endif
#endif
#if HAS_Z_MIN
#if ENABLED(Z_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(Z, MIN);
#if HAS_Z2_MIN
UPDATE_ENDSTOP_BIT(Z2, MIN);
#else
COPY_LIVE_STATE(Z_MIN, Z2_MIN);
#endif
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
UPDATE_ENDSTOP_BIT(Z, MIN);
#elif Z_HOME_DIR < 0
UPDATE_ENDSTOP_BIT(Z, MIN);
#endif
#endif
// When closing the gap check the enabled probe
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
#endif
#if HAS_Z_MAX
// Check both Z dual endstops
#if ENABLED(Z_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(Z, MAX);
#if HAS_Z2_MAX
UPDATE_ENDSTOP_BIT(Z2, MAX);
#else
COPY_LIVE_STATE(Z_MAX, Z2_MAX);
#endif
#elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
// If this pin isn't the bed probe it's the Z endstop
UPDATE_ENDSTOP_BIT(Z, MAX);
#endif
#endif
#if ENABLED(ENDSTOP_NOISE_FILTER)
/**
* Filtering out noise on endstops requires a delayed decision. Let's assume, due to noise,
* that 50% of endstop signal samples are good and 50% are bad (assuming normal distribution
* of random noise). Then the first sample has a 50% chance to be good or bad. The 2nd sample
* also has a 50% chance to be good or bad. The chances of 2 samples both being bad becomes
* 50% of 50%, or 25%. That was the previous implementation of Marlin endstop handling. It
* reduces chances of bad readings in half, at the cost of 1 extra sample period, but chances
* still exist. The only way to reduce them further is to increase the number of samples.
* To reduce the chance to 1% (1/128th) requires 7 samples (adding 7ms of delay).
*/
static esbits_t old_live_state;
if (old_live_state != live_state) {
endstop_poll_count = 7;
old_live_state = live_state;
}
else if (endstop_poll_count && !--endstop_poll_count)
validated_live_state = live_state;
if (!abort_enabled()) return;
#endif
// Test the current status of an endstop
#define TEST_ENDSTOP(ENDSTOP) (TEST(state(), ENDSTOP))
// Record endstop was hit
#define _ENDSTOP_HIT(AXIS, MINMAX) SBI(hit_state, _ENDSTOP(AXIS, MINMAX))
// Call the endstop triggered routine for single endstops
#define PROCESS_ENDSTOP(AXIS,MINMAX) do { \
if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX))) { \
_ENDSTOP_HIT(AXIS, MINMAX); \
planner.endstop_triggered(_AXIS(AXIS)); \
} \
}while(0)
// Call the endstop triggered routine for dual endstops
#define PROCESS_DUAL_ENDSTOP(AXIS1, AXIS2, MINMAX) do { \
const byte dual_hit = TEST_ENDSTOP(_ENDSTOP(AXIS1, MINMAX)) | (TEST_ENDSTOP(_ENDSTOP(AXIS2, MINMAX)) << 1); \
if (dual_hit) { \
_ENDSTOP_HIT(AXIS1, MINMAX); \
/* if not performing home or if both endstops were trigged during homing... */ \
if (!stepper.homing_dual_axis || dual_hit == 0b11) \
planner.endstop_triggered(_AXIS(AXIS1)); \
} \
}while(0)
#if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
// If G38 command is active check Z_MIN_PROBE for ALL movement
if (G38_move) {
if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); }
else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); }
else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); }
G38_endstop_hit = true;
}
}
#endif
// Now, we must signal, after validation, if an endstop limit is pressed or not
if (stepper.axis_is_moving(X_AXIS)) {
if (stepper.motor_direction(X_AXIS_HEAD)) { // -direction
#if HAS_X_MIN
#if ENABLED(X_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(X, X2, MIN);
#else
if (X_MIN_TEST) PROCESS_ENDSTOP(X, MIN);
#endif
#endif
}
else { // +direction
#if HAS_X_MAX
#if ENABLED(X_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(X, X2, MAX);
#else
if (X_MAX_TEST) PROCESS_ENDSTOP(X, MAX);
#endif
#endif
}
}
if (stepper.axis_is_moving(Y_AXIS)) {
if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
#if HAS_Y_MIN
#if ENABLED(Y_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(Y, Y2, MIN);
#else
PROCESS_ENDSTOP(Y, MIN);
#endif
#endif
}
else { // +direction
#if HAS_Y_MAX
#if ENABLED(Y_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(Y, Y2, MAX);
#else
PROCESS_ENDSTOP(Y, MAX);
#endif
#endif
}
}
if (stepper.axis_is_moving(Z_AXIS)) {
if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
#if HAS_Z_MIN
#if ENABLED(Z_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(Z, Z2, MIN);
#else
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN);
#elif ENABLED(Z_MIN_PROBE_ENDSTOP)
if (!z_probe_enabled) PROCESS_ENDSTOP(Z, MIN);
#else
PROCESS_ENDSTOP(Z, MIN);
#endif
#endif
#endif
// When closing the gap check the enabled probe
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN_PROBE);
#endif
}
else { // Z +direction. Gantry up, bed down.
#if HAS_Z_MAX
#if ENABLED(Z_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(Z, Z2, MAX);
#elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
// If this pin is not hijacked for the bed probe
// then it belongs to the Z endstop
PROCESS_ENDSTOP(Z, MAX);
#endif
#endif
}
}
} // Endstops::update()
#if ENABLED(PINS_DEBUGGING)
bool Endstops::monitor_flag = false;
/**
* monitors endstops & Z probe for changes
*
* If a change is detected then the LED is toggled and
* a message is sent out the serial port
*
* Yes, we could miss a rapid back & forth change but
* that won't matter because this is all manual.
*
*/
void Endstops::monitor() {
static uint16_t old_live_state_local = 0;
static uint8_t local_LED_status = 0;
uint16_t live_state_local = 0;
#if HAS_X_MIN
if (READ(X_MIN_PIN)) SBI(live_state_local, X_MIN);
#endif
#if HAS_X_MAX
if (READ(X_MAX_PIN)) SBI(live_state_local, X_MAX);
#endif
#if HAS_Y_MIN
if (READ(Y_MIN_PIN)) SBI(live_state_local, Y_MIN);
#endif
#if HAS_Y_MAX
if (READ(Y_MAX_PIN)) SBI(live_state_local, Y_MAX);
#endif
#if HAS_Z_MIN
if (READ(Z_MIN_PIN)) SBI(live_state_local, Z_MIN);
#endif
#if HAS_Z_MAX
if (READ(Z_MAX_PIN)) SBI(live_state_local, Z_MAX);
#endif
#if HAS_Z_MIN_PROBE_PIN
if (READ(Z_MIN_PROBE_PIN)) SBI(live_state_local, Z_MIN_PROBE);
#endif
#if HAS_X2_MIN
if (READ(X2_MIN_PIN)) SBI(live_state_local, X2_MIN);
#endif
#if HAS_X2_MAX
if (READ(X2_MAX_PIN)) SBI(live_state_local, X2_MAX);
#endif
#if HAS_Y2_MIN
if (READ(Y2_MIN_PIN)) SBI(live_state_local, Y2_MIN);
#endif
#if HAS_Y2_MAX
if (READ(Y2_MAX_PIN)) SBI(live_state_local, Y2_MAX);
#endif
#if HAS_Z2_MIN
if (READ(Z2_MIN_PIN)) SBI(live_state_local, Z2_MIN);
#endif
#if HAS_Z2_MAX
if (READ(Z2_MAX_PIN)) SBI(live_state_local, Z2_MAX);
#endif
uint16_t endstop_change = live_state_local ^ old_live_state_local;
if (endstop_change) {
#if HAS_X_MIN
if (TEST(endstop_change, X_MIN)) SERIAL_PROTOCOLPAIR(" X_MIN:", TEST(live_state_local, X_MIN));
#endif
#if HAS_X_MAX
if (TEST(endstop_change, X_MAX)) SERIAL_PROTOCOLPAIR(" X_MAX:", TEST(live_state_local, X_MAX));
#endif
#if HAS_Y_MIN
if (TEST(endstop_change, Y_MIN)) SERIAL_PROTOCOLPAIR(" Y_MIN:", TEST(live_state_local, Y_MIN));
#endif
#if HAS_Y_MAX
if (TEST(endstop_change, Y_MAX)) SERIAL_PROTOCOLPAIR(" Y_MAX:", TEST(live_state_local, Y_MAX));
#endif
#if HAS_Z_MIN
if (TEST(endstop_change, Z_MIN)) SERIAL_PROTOCOLPAIR(" Z_MIN:", TEST(live_state_local, Z_MIN));
#endif
#if HAS_Z_MAX
if (TEST(endstop_change, Z_MAX)) SERIAL_PROTOCOLPAIR(" Z_MAX:", TEST(live_state_local, Z_MAX));
#endif
#if HAS_Z_MIN_PROBE_PIN
if (TEST(endstop_change, Z_MIN_PROBE)) SERIAL_PROTOCOLPAIR(" PROBE:", TEST(live_state_local, Z_MIN_PROBE));
#endif
#if HAS_X2_MIN
if (TEST(endstop_change, X2_MIN)) SERIAL_PROTOCOLPAIR(" X2_MIN:", TEST(live_state_local, X2_MIN));
#endif
#if HAS_X2_MAX
if (TEST(endstop_change, X2_MAX)) SERIAL_PROTOCOLPAIR(" X2_MAX:", TEST(live_state_local, X2_MAX));
#endif
#if HAS_Y2_MIN
if (TEST(endstop_change, Y2_MIN)) SERIAL_PROTOCOLPAIR(" Y2_MIN:", TEST(live_state_local, Y2_MIN));
#endif
#if HAS_Y2_MAX
if (TEST(endstop_change, Y2_MAX)) SERIAL_PROTOCOLPAIR(" Y2_MAX:", TEST(live_state_local, Y2_MAX));
#endif
#if HAS_Z2_MIN
if (TEST(endstop_change, Z2_MIN)) SERIAL_PROTOCOLPAIR(" Z2_MIN:", TEST(live_state_local, Z2_MIN));
#endif
#if HAS_Z2_MAX
if (TEST(endstop_change, Z2_MAX)) SERIAL_PROTOCOLPAIR(" Z2_MAX:", TEST(live_state_local, Z2_MAX));
#endif
SERIAL_PROTOCOLPGM("\n\n");
analogWrite(LED_PIN, local_LED_status);
local_LED_status ^= 255;
old_live_state_local = live_state_local;
}
}
#endif // PINS_DEBUGGING

174
Marlin/endstops.h Normal file
View file

@ -0,0 +1,174 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* endstops.h - manages endstops
*/
#ifndef __ENDSTOPS_H__
#define __ENDSTOPS_H__
#include "MarlinConfig.h"
#define VALIDATE_HOMING_ENDSTOPS
enum EndstopEnum : char {
X_MIN,
Y_MIN,
Z_MIN,
Z_MIN_PROBE,
X_MAX,
Y_MAX,
Z_MAX,
X2_MIN,
X2_MAX,
Y2_MIN,
Y2_MAX,
Z2_MIN,
Z2_MAX
};
class Endstops {
public:
static bool enabled, enabled_globally;
#if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
typedef uint16_t esbits_t;
#if ENABLED(X_DUAL_ENDSTOPS)
static float x_endstop_adj;
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
static float y_endstop_adj;
#endif
#if ENABLED(Z_DUAL_ENDSTOPS)
static float z_endstop_adj;
#endif
#else
typedef uint8_t esbits_t;
#endif
private:
static esbits_t live_state;
static volatile uint8_t hit_state; // Use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT index
#if ENABLED(ENDSTOP_NOISE_FILTER)
static esbits_t validated_live_state;
static uint8_t endstop_poll_count; // Countdown from threshold for polling
#endif
public:
Endstops() {};
/**
* Initialize the endstop pins
*/
static void init();
/**
* Are endstops or the probe set to abort the move?
*/
FORCE_INLINE static bool abort_enabled() {
return (enabled
#if HAS_BED_PROBE
|| z_probe_enabled
#endif
);
}
/**
* Periodic call to poll endstops if required. Called from temperature ISR
*/
static void poll();
/**
* Update endstops bits from the pins. Apply filtering to get a verified state.
* If abort_enabled() and moving towards a triggered switch, abort the current move.
* Called from ISR contexts.
*/
static void update();
/**
* Get Endstop hit state.
*/
FORCE_INLINE static uint8_t trigger_state() { return hit_state; }
/**
* Get current endstops state
*/
FORCE_INLINE static esbits_t state() {
return
#if ENABLED(ENDSTOP_NOISE_FILTER)
validated_live_state
#else
live_state
#endif
;
}
/**
* Report endstop hits to serial. Called from loop().
*/
static void event_handler();
/**
* Report endstop positions in response to M119
*/
static void M119();
// Enable / disable endstop checking globally
static void enable_globally(const bool onoff=true);
// Enable / disable endstop checking
static void enable(const bool onoff=true);
// Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
static void not_homing();
#if ENABLED(VALIDATE_HOMING_ENDSTOPS)
// If the last move failed to trigger an endstop, call kill
static void validate_homing_move();
#else
FORCE_INLINE static void validate_homing_move() { hit_on_purpose(); }
#endif
// Clear endstops (i.e., they were hit intentionally) to suppress the report
FORCE_INLINE static void hit_on_purpose() { hit_state = 0; }
// Enable / disable endstop z-probe checking
#if HAS_BED_PROBE
static volatile bool z_probe_enabled;
static void enable_z_probe(const bool onoff=true);
#endif
// Debugging of endstops
#if ENABLED(PINS_DEBUGGING)
static bool monitor_flag;
static void monitor();
static void run_monitor();
#endif
};
extern Endstops endstops;
#endif // __ENDSTOPS_H__

175
Marlin/enum.h Normal file
View file

@ -0,0 +1,175 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __ENUM_H__
#define __ENUM_H__
#include "MarlinConfig.h"
/**
* Axis indices as enumerated constants
*
* - X_AXIS, Y_AXIS, and Z_AXIS should be used for axes in Cartesian space
* - A_AXIS, B_AXIS, and C_AXIS should be used for Steppers, corresponding to XYZ on Cartesians
* - X_HEAD, Y_HEAD, and Z_HEAD should be used for Steppers on Core kinematics
*/
enum AxisEnum : unsigned char {
X_AXIS = 0,
A_AXIS = 0,
Y_AXIS = 1,
B_AXIS = 1,
Z_AXIS = 2,
C_AXIS = 2,
E_CART = 3,
#if ENABLED(HANGPRINTER) // Hangprinter order: A_AXIS, B_AXIS, C_AXIS, D_AXIS, E_AXIS
D_AXIS = 3,
E_AXIS = 4,
#else
E_AXIS = 3,
#endif
X_HEAD, Y_HEAD, Z_HEAD,
ALL_AXES = 0xFE,
NO_AXIS = 0xFF
};
#define LOOP_S_LE_N(VAR, S, N) for (uint8_t VAR=S; VAR<=N; VAR++)
#define LOOP_S_L_N(VAR, S, N) for (uint8_t VAR=S; VAR<N; VAR++)
#define LOOP_LE_N(VAR, N) LOOP_S_LE_N(VAR, 0, N)
#define LOOP_L_N(VAR, N) LOOP_S_L_N(VAR, 0, N)
#define LOOP_NA(VAR) LOOP_L_N(VAR, NUM_AXIS)
#define LOOP_XYZ(VAR) LOOP_S_LE_N(VAR, X_AXIS, Z_AXIS)
#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_CART)
#define LOOP_XYZE_N(VAR) LOOP_S_L_N(VAR, X_AXIS, XYZE_N)
#define LOOP_MOV_AXIS(VAR) LOOP_S_L_N(VAR, A_AXIS, MOV_AXIS)
#define LOOP_NUM_AXIS(VAR) LOOP_S_L_N(VAR, A_AXIS, NUM_AXIS)
#define LOOP_NUM_AXIS_N(VAR) LOOP_S_L_N(VAR, A_AXIS, NUM_AXIS_N)
typedef enum {
LINEARUNIT_MM,
LINEARUNIT_INCH
} LinearUnit;
typedef enum {
TEMPUNIT_C,
TEMPUNIT_K,
TEMPUNIT_F
} TempUnit;
/**
* Debug flags
* Not yet widely applied
*/
enum DebugFlags : unsigned char {
DEBUG_NONE = 0,
DEBUG_ECHO = _BV(0), ///< Echo commands in order as they are processed
DEBUG_INFO = _BV(1), ///< Print messages for code that has debug output
DEBUG_ERRORS = _BV(2), ///< Not implemented
DEBUG_DRYRUN = _BV(3), ///< Ignore temperature setting and E movement commands
DEBUG_COMMUNICATION = _BV(4), ///< Not implemented
DEBUG_LEVELING = _BV(5), ///< Print detailed output for homing and leveling
DEBUG_MESH_ADJUST = _BV(6), ///< UBL bed leveling
DEBUG_ALL = 0xFF
};
#if ENABLED(ADVANCED_PAUSE_FEATURE)
enum AdvancedPauseMenuResponse : char {
ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
};
#if ENABLED(ULTIPANEL)
enum AdvancedPauseMessage : char {
ADVANCED_PAUSE_MESSAGE_INIT,
ADVANCED_PAUSE_MESSAGE_UNLOAD,
ADVANCED_PAUSE_MESSAGE_INSERT,
ADVANCED_PAUSE_MESSAGE_LOAD,
ADVANCED_PAUSE_MESSAGE_PURGE,
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE,
#endif
ADVANCED_PAUSE_MESSAGE_OPTION,
ADVANCED_PAUSE_MESSAGE_RESUME,
ADVANCED_PAUSE_MESSAGE_STATUS,
ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
};
#endif
enum AdvancedPauseMode : char {
ADVANCED_PAUSE_MODE_PAUSE_PRINT,
ADVANCED_PAUSE_MODE_LOAD_FILAMENT,
ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT
};
#endif
/**
* States for managing Marlin and host communication
* Marlin sends messages if blocked or busy
*/
#if ENABLED(HOST_KEEPALIVE_FEATURE)
enum MarlinBusyState : char {
NOT_BUSY, // Not in a handler
IN_HANDLER, // Processing a GCode
IN_PROCESS, // Known to be blocking command input (as in G29)
PAUSED_FOR_USER, // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)
};
#endif
/**
* SD Card
*/
enum LsAction : char { LS_SerialPrint, LS_Count, LS_GetFilename };
/**
* Ultra LCD
*/
enum LCDViewAction : char {
LCDVIEW_NONE,
LCDVIEW_REDRAW_NOW,
LCDVIEW_CALL_REDRAW_NEXT,
LCDVIEW_CLEAR_CALL_REDRAW,
LCDVIEW_CALL_NO_REDRAW
};
/**
* Dual X Carriage modes. A Dual Nozzle can also do duplication.
*/
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
enum DualXMode : char {
DXC_FULL_CONTROL_MODE, // DUAL_X_CARRIAGE only
DXC_AUTO_PARK_MODE, // DUAL_X_CARRIAGE only
DXC_DUPLICATION_MODE
};
#endif
/**
* Workspace planes only apply to G2/G3 moves
* (and "canned cycles" - not a current feature)
*/
#if ENABLED(CNC_WORKSPACE_PLANES)
enum WorkspacePlane : char { PLANE_XY, PLANE_ZX, PLANE_YZ };
#endif
#endif // __ENUM_H__

1940
Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1920
Marlin/example_configurations/AliExpress/CL-260/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

15
Marlin/example_configurations/AliExpress/CL-260/README.txt Normal file
View file

@ -0,0 +1,15 @@
This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.
(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)
The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.
The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...
Have fun!
--
tobi

1997
Marlin/example_configurations/Anet/A2plus/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/Anet/A2plus/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

2075
Marlin/example_configurations/Anet/A6/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/Anet/A6/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1929
Marlin/example_configurations/Anet/A8/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/Anet/A8/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1920
Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1920
Marlin/example_configurations/BIBO/TouchX/default/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1908
Marlin/example_configurations/BQ/Hephestos/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1918
Marlin/example_configurations/BQ/Hephestos_2/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1662
Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

29
Marlin/example_configurations/BQ/Hephestos_2/README.md Normal file
View file

@ -0,0 +1,29 @@
# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
Based on the original configuration file shipped with the heavily modified Marlin fork by BQ.
The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin).
NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware.
## Changelog
* 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af).
ABL Bilinear 5x5 is active by default.
* 2017/07/06 - Configuration updated to the latest Marlin version and added support for the
official BQ heated bed upgrade kit.
* 2016/12/13 - Configuration updated to the latest Marlin version.
* 2016/07/13 - Configuration updated to the latest Marlin version.
* 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now
disables the heater when finishes printing.
* 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values.
* 2016/03/01 - The first release of Marlin's configuration file for the
BQ Hephestos 2 3D printer.
## Support
This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any
issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail.

100
Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h Normal file
View file

@ -0,0 +1,100 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_BMPWIDTH 64
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000,
B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000,
B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000,
B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000,
B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000,
B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000,
B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000,
B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000,
B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000,
B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000,
B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000,
B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};

1908
Marlin/example_configurations/BQ/WITBOX/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

1919
Marlin/example_configurations/Cartesio/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1654
Marlin/example_configurations/Cartesio/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

100
Marlin/example_configurations/Cartesio/_Bootscreen.h Normal file
View file

@ -0,0 +1,100 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_BMPWIDTH 64
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,
B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000,
B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000,
B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,
B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,
B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00001111,B00000111,B10000111,B11111111,B11111111,B11100000,B00000000,
B00000000,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B00000000,
B00000001,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000,
B00000011,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000,
B00000111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11000000,
B00000111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000,
B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000,
B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000,
B00011111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000,
B00011111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11110000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11111000,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
B00111111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00011111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000,
B00011111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000,
B00011111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000,
B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000,
B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11000000,
B00000111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11000000,
B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B10000000,
B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B00000000,
B00000001,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000,
B00000000,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000,
B00000000,B00001111,B11111111,B11111111,B11000011,B11000001,B11100000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,
B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,
B00000000,B00000001,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,
B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000,
B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000,
B00000000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};

1930
Marlin/example_configurations/Creality/CR-10/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

1657
Marlin/example_configurations/Creality/CR-10/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

Some files were not shown because too many files have changed in this diff Show more